The angular gear 1018 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is consistent with the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Please note that before putting the gearbox into operation, fill and check the oil level. The maximum power transmission is 7kW at 540rpm and 11kW at 1000rpm. Compact and light High-quality workmanship High torque Long service life Universal applications< /li>

The angular gear 1018 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is opposite to the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Attention, fill and check the oil level before putting the gearbox into operation.  ~The maximum power transmission is 7kW at 540rpm and 11kW at 1000rpm.Compact and light< li>High-quality workmanshipHigh torqueLong service lifeUniversal applications

The angular gear 1020 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is consistent with the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Please note that before putting the gearbox into operation, fill and check the oil level. ~ ~The maximum power transmission is 9kW at 540rpm and 13kW at 1000rpm. Compact and light High-quality workmanship High torque Long service life Universal applications < /ul>

The angular gear 1020 is a compact and lightweight gear designed for use in circular saws. The gearbox has a gear ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is opposite to the direction of rotation of the input shaft (viewed from the visible end of the shaft). The angle gearbox is equipped with a high-strength aluminum housing, a PTO shaft profile 1 3/8 x 6 at the input and an output shaft with a diameter of 25 mm. The gearbox can accommodate torque peaks of up to 2 times the rated torque. of the nominal torque. ~We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox. Attention, fill and check the oil level before putting the gearbox into operation. ~ ~ The maximum power transmission is 9kW at 540rpm and 13kW at 1000rpm.Compact and lightweightHigh-quality workmanshipHigh torqueLong service lifeUniversal applications

The 2020 angular gearbox is a compact gearbox designed for heavy-duty use. The gearbox has a transmission ratio of 1:2.78, which means that the speed at the output of the gearbox is 2.78 times higher than the speed at the input. The direction of rotation of the output shaft is reversed or the same as the direction of rotation of the input shaft (looking at the visible shaft end). The angular gearbox is equipped with a robust cast housing, a 1 3/8 x 6 PTO profile at the input and an output shaft with a diameter of 25 mm (order no. 65792) and 30 mm (order no. 59917). The gearbox can absorb torque peaks of up to 2 times the nominal torque. We would like to point out that an overload protection device must be used in accordance with the performance data of the gearbox.  The maximum power transmission is 9kW at 540rpm and 14kW at 1000rpm.Compact and robustHigh-quality workmanshipHigh torqueLong service lifeUniversal applications

Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 37 kW (50 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1,46Max. power (540 rpm)        approx. 37 kW / 50 hpMax. output torque    up to 446 Nm (at 540 rpm)Material                    High-quality grey cast ironApplication                Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.

​For various types of application, especially in agriculture. Small dimensions and low weight. Easy maintenance. The gearboxes are supplied without oil filling. General technical data: Inlet connection: 1 3/8" Output connection: Ø 35 h6 Reversal of direction of rotation: yes In general, torque peaks up to 2 times the nominal torque do not cause damage to the individual gearbox components. However, complete integrity can only be guaranteed by a suitable safety device.

Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 28 kW (38 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1,46:1Max. power (540 rpm)        approx. 28 kW / 38 hpMax. output torque    up to 722 Nm (at 540 rpm)Material                    High-quality grey cast ironApplication                Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.

Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 49 kW (66 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1Max. power (540 rpm)        approx. 49 kW / 66 hpMax. output torque    up to 859 Nm (at 540 rpm)Material                    High-quality grey cast ironApplication                Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.

Maximum power transmission for professionals: Bondioli & Pavesi S2050 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2050 series right-angle gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2050 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2050 is the all-rounder for medium loads with an input power of up to 29 kW (39,44 hp) at 540 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1,91Max. power (540 rpm)        approx. 29 kW / 39,44 hpMax. output torque    up to 272 Nm (at 540 rpm)Material                    High-quality grey cast ironApplication                Fertiliser spreaders, small mowersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.

Maximum power transmission for professionals: Bondioli & Pavesi S2100 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2100 series gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2100 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2100 is a powerhouse for demanding tasks, delivering up to 81 kW (110 hp) at 540 rpm in a 1:1 transmission ratio, or an impressive 125 kW (170 hp) at 1000 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1Max. power (540 rpm)        approx. 81 kW / 110 hpMax. output torque    up to 1431 Nm (at 540 rpm)Material: High-quality grey cast ironApplication: Mulchers, larger tillers, feed mixersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.

Maximum power transmission for professionals: Bondioli & Pavesi S2100 gearboxesWhen it comes to absolute reliability in continuous operation, farmers and machine builders worldwide rely on drive technology from Bondioli & Pavesi. With the S2100 series gearboxes, you get robust solutions made of high-quality grey cast iron, specially developed for the toughest mechanical requirements.Why the S2100 series?These gearboxes form the backbone of many agricultural machines – from feed mixers to soil cultivation equipment. They impress with:Maximum load capacity: Thanks to their solid grey cast iron housings, these models offer outstanding stability and vibration damping.Precise performance: The S2100 is a powerhouse for demanding tasks, delivering up to 51 kW (69 hp) at 540 rpm in a 1:1,92 transmission ratio, or an impressive 79 kW (107 hp) at 1000 rpm.Versatile gear ratios: With common gear ratios (e.g. 1.91:1 or 1:1), the gearboxes can be precisely adapted to your machine requirements.Durability through quality: Developed to the highest industry standards for minimal maintenance intervals and maximum service life.Technical highlights at a glance, transmission ratio 1:1,92Max. power (540 rpm)         approx. 51 kW / 69 hpMax. output torque     up to 474 Nm (at 540 rpm)Material:  High-quality grey cast ironApplication:  Mulchers, larger tillers, feed mixersEnsure original quality for your drive!Whether as original equipment or as a durable spare part, with Bondioli & Pavesi you are choosing efficiency and safety in the field.

With 5 different possible uses.1) Input X, output Y: Reduction 2:1 with reversal of direction of rotation 2) Input Reduction 2:1 with constant direction of rotation 3) Input Z (Y), output Y (Z): Ratio 1:1 with reversal of direction of rotation < strong>4) Input Y, output X: Ratio 1:2 with reversal of direction of rotation 5) Input Z, output Direction of rotation. Technical data: 14.7 kW, 540 rpm or 1000 rpm, Connections: 3x13/8x6 (inner profile). 1 piece of PTO shaft stub (as shown) included in delivery. A mounting console is attached to the gearbox. Filled with gear slime EPO-0.3 kg.In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Gear ratio 1:2, same direction of rotation, weight: 26 kgInputx: 540 rpm, 51.5 kW, 928 Nm, connection 1 3/8"x6 stubsOutput y: 1080 rpm, 460 Nm, connection 1 3/8"x6 inner profileIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

For various types of applications, especially in agriculture. Small dimensions and low weight. Easy maintenance. The gearboxes are delivered without oil filling. General technical data: ~Input connection: 1 3/8" ~Output connection: 30 h6 ~Reversal of direction of rotation: yes ~Height H: 294 mm  ~Width B1: 110 mm ~Width B2: 215 mmIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Through various combination options by reconnecting the supplied PTO shaft stub, gear ratios of 1:1, 1:2 or 2:1 can be achieved while maintaining or changing the direction of rotation. This results in 6 different possible uses. The PTO shaft stub is fixed in the hollow shafts by circlips.44 kW at 540 rpm or 1000 rpm.PTO shaft connections: 3x 1 3/8 x 6Generally, torque peaks are up to 2 times higher of the nominal torque does not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Particularly suitable for attachment to the front PTO shaft to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The transmission is mounted on the tractor side.Input Y:PTO shaft stub or internal toothing540/1000 rpm, 26.4/51.5 kW, 477/928 NmConnection 1 3/8x6, internal or external toothingPossibility with through drive 1:1 (direction of rotation constant).Output X:284/ 526 rpm, 482/895 NmConnection 1 3/8x6 external toothingReversal of direction of rotationIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Especially suitable for the front PTO to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The gearbox is installed on the device side.Input Y:540/1000 rpm26.4/39.7 kW 477/386 NmConnection 1 3/8x6Output X:284/526 rpm895/725 NmConnection 1 3/8x6 inner profile Reversal of direction of rotationPossibility with through drive 1:1 (direction of rotation remains the same). In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Technical data: 22 kW, 540 rpm, 395 Nm Input connection: 1-3/8x6 (inner profile) Output connection: 1-3/8x6 1. Output shaft: direction of rotation remains the same 2nd output shaft: reversal of direction of rotationIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Reversing or reversing gear to change the direction of rotation with through drive.Input Y:540 rpmPower: 51.5 kWTorque: 910 Nm Connection 1 3/8x6Reversal of direction of rotationPossibility with through drive 1:1 (direction of rotation remains the same).In general, torque peaks up to 2 times the nominal torque do not lead to any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

The forks, forged from alloy steel in one piece in the bridge and centering pin, are thermally treated. The central part consists of two thermally treated flange forks welded together and carries the two forks with bridge and centering pin and the guide disk sliding between them. The safety quick release on the outer fork is standard.