Engines & accessories
Taper clamping bush with metric, cylindrical finish bore and keyway, for a frictional shaft-hub connection.The clamping bush creates a connection between shaft and component, e.g. gear wheel, sprocket or V-belt pulley. This system provides a cost-effective and reliable power transmission to your equipment. The taper clamping bushing has a metric, cylindrical finish bore and uses keyways and clamping screws to create a force-fit connection between the motor or equipment shaft and the respective V-belt pulley. This system makes it possible to change the speed quickly and without great effort.
Electric motor with flange for circular saw blades with 30mm bore. Power: 5,5KW /1350U/min,50 Hz, 380V, without switch, with flange, shaft diameter 30mm, height 190mm, width 190/245mm ATTENTION: this motor is not standard for older machines equipped with a star-delta switch. When using the star-delta switch, the switch with order number 46686 must also be used.
Taper clamping bushing with metric, cylindrical finished bore and keyway, for a force-fitting shaft-hub connection.The clamping bushing creates a connection between the shaft and the component, e.g. gear, chain wheel or V-belt pulley. With this system, a cost-effective and reliable power transmission to your device is possible.The taper clamping bushing has a metric, cylindrical finished bore and, with a keyway and clamping screws, creates a non-positive connection between the motor or device shaft and the respective V-belt pulley. This system makes it possible to change the speed quickly and without much effort.
The clamping bush creates a connection between the shaft and the component, e.g. gear, chain wheel or V-belt pulley. With this system, cost-effective and reliable power transmission to your device is possible. The taper clamping bushing has a metric, cylindrical finished bore and uses a keyway and clamping screws to create a friction-locking connection between the motor or device shaft and the respective V-belt pulley. This system makes it possible to change the speed quickly and without much effort.
Taper clamping bushing with metric, cylindrical finished bore and keyway, for a force-fitting shaft-hub connection.The clamping bushing creates a connection between the shaft and the component, e.g. gear, chain wheel or V-belt pulley. With this system, a cost-effective and reliable power transmission to your device is possible.The taper clamping bushing has a metric, cylindrical finished bore and, with a keyway and clamping screws, creates a non-positive connection between the motor or device shaft and the respective V-belt pulley. This system makes it possible to change the speed quickly and without much effort.
1400 rpm, protection class IP55, 400V, without switch.
Three-phase motor 4-pole, speed 1500rpm, up to 2.0kW 230/400V, from 3.0kW 400/690V, design B3/B5 with flange and feet. Protection class IP55.
For flat and V-belt pulleys. 50 mm stiz for pulley, 3-hole flange with 70 mm bolt circle. Diameter refers to shaft . From shaft 35 mm - disc min. 130 mm.
Switch unit for firewood circular saws and tilting saws with motor brake, On/off switch, 400 V 16 A plug with phase inverter and cable.Compact switch unit with practical phase inverter for reversing the direction of rotation. HCK3T/400VAC-3 12 A, 400 V, 50/60 HzAC-15 8 A, 400 V, 50/60 Hz EN 60947-4-1, EN 60947-5-1Protection class IP 54.
Switch unit with on/off switch and 400 V 16 A plug with phase inverter and approx. 20 cm cable!Compact switch unit with practical phase inverter for reversing the direction of rotation. Suitable for log splitters HSE 10, 11 and 14 and circular table saw TKS. HCK3T/400VAC-3, 12 A, 400 V, 50 HzAC-15 6 A, 400 V, 50 Hz Protection class IP 54.
V-belt 17X1225 LW1265
Optibelt high-performance narrow V-belts for excellent running properties
Optibelt high-performance narrow V-belts for excellent running properties
Optibelt high-performance narrow V-belts for excellent running properties
Optibelt high-performance narrow V-belts for excellent running properties
Industrial and commercial quality, made of aluminum.
Industrial and commercial quality, made of aluminum
Commercial &~ Industrial version, made of aluminum
Industrial and commercial quality, made of aluminum
V-belt pulley for transmitting a rotary movement from a motor to a device or device. ~V-belts are a simple and efficient way to provide your machines with a suitable drive. ~This pulley is made of gray cast iron, phosphated and is designed for V-belts SPA and A/13, belt width 12.7 or 13mm.The solid cast base material ensures optimal power transmission with low wear. Attached to the shaft using the proven Taperlock system.Thanks to the large selection of discs, it is easy to optimally adjust the desired speed for your device.
V-belt pulley for transmitting a rotary movement from a motor to a device or device. ~V-belts are a simple and efficient way to provide your machines with a suitable drive. ~This pulley is made of gray cast iron, phosphated and is designed for V-belts SPB and A/17, belt width 17mm.Thanks to the solid cast base material, optimal power transmission with low wear. Attached to the shaft using the proven Taperlock system.The large selection of discs makes it easy to optimally adjust the desired speed for your device.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.