Hydraulikprogramm

Aluminum oil air cooler in panel construction. Maximum flow 150 l/min, max. operating pressure 26 bar, protection class IP55.Delivered without connections and mounting base.Application: hay cranes, stationary small units

Steel flex, bright, external thread M10x1 that can be rotated on both sides with internal and external cones.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard design of the valves in parallel connection.Flow max.: 90 L/min.Operating pressure: 250 barmax. Pressure: 315 barRelief valve set: 100 bar, adjustable from 20-315 barScrew-in thread A, B, P, P2: R1/2?Screw-in thread T, T2: R3/4? HR=Raise locked, 0=Middle position, S=Lowering.The switching positions listed depend on the respective model of the control valve.

Linksgewinde M36x3, Kat. 3, Bohrung 32mm, Gewindelänge 200 mm, verzinkt. 

The temperature control is a system with an adjustable thermostat, without oil contact. The switching temperature can be adjusted using the rotary knob on the housing. Furthermore, the control can be based on the rail system. the oil air cooler series asa rail can be mounted. This allows the control to be flexibly pushed to a desired position and then tightened. The final wiring to the fan must be carried out individually by the customer.Housing material: sheet steel, powder-coatedInstallation position: anyAdjustable switching range: -30/+120CSwitching capacity C.1-10/2, 5)A/250V, C2-6(2.5)A/250Vmax. Head temperature: +85Cmax. Sensor temperature: +150C