Hydraulic pumps and accessories

Our offer

-29 %

#FA41791

Blade holder suitable for RASSPE

Blade holder suitable for Rasspe drum mowers

€4.69* €6.59* (28.83% saved)

#21294

Schneider Compact multi-grab shovel with EURO holder

Version: 6 Zinken | Volume: 0,46 | Weight (kg): 240 | Width (mm): 1400

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share

Length (mm): 270 | Tine material: 25 x 8

Tine material 25x8.

€8.79*

-8 %

#FA109538

Schneider Coupling plate Avant

Base plate with Avant mount

€109.00* €119.00* (8.4% saved)

-10 %

#FA109546

Coupling plate for Schäffer farm loader, tubular frame mount

Weld-on coupling plate for attaching tools and equipment to the Schäffer farm loader with connection for shaped tube.

€169.00* €187.00* (9.63% saved)

-25 %

#FA54554

Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.00* €3.99* (24.81% saved)

-40 %

#FA63556

ESM Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-9 %

#FA72434

Schneider EURO three-point adapter Cat.2

Clearance adapter from EURO attachment on the front loader to implements with three-point attachment cat. 2. Very robust and lightweight design.The Euro adapter from Schneider makes it possible to use existing implements and implements with category 2 three-point linkage on front loaders with Euro linkage. The short upper top link, which can be used in two slots, and the lower lockable three-point hitches ensure safe handling of the tools and implements with the adapter.Load capacity 1000 kgWeight 50 kg

€319.00* €349.00* (8.6% saved)

-20 %

#FA51978

Feed mixer knife short 540x8mm for Mayer Siloking

Thickness 8mm

€39.90* €49.90* (20.04% saved)

-25 %

#FA19414

Friction strip 996 mm, 1 pair

€49.00* €65.00* (24.62% saved)

All Products

#345

Angled connection piece 90�

C (mm): 46 | D Weight (inch): 1" | E (mm): 25 | F (mm): 10,5 | H (mm): 27 | I (mm): 51 | Screw: M10x30

3-hole mounting flange with O-ring and screws.

Variants from €11.50*

€24.00*

#115693

Angled connection piece 90�

C (mm): 40 | D Weight (inch): 1/2" | E (mm): 15 | H (mm): 19 | I (mm): 30 | Screw: 2 Stk. M6x20, 2 Stk. M6x35

4-hole mounting flange with O-ring and screws.

Variants from €16.00*

€17.00*

#FA31221

Double pump suitable for Steyr Series 80 with SteyrMatic

€798.00*

#386

OMT Elastic coupling

E-motor power (kW): 0,55-0,75 | Length (mm): 87 | Pump Group: 2 | Ø outside (mm): 65 | Ø shaft (mm): 19

Used to connect hydraulic pumps with a 1:8 tapered shaft and electric motors. The conical bore depends on the size BG1, BG2 or BG3 of the hydraulic pump. Material: AluminiumThe largest diameter of the cone is on the side of the hydraulic pump: Size 1 9.7 mm Size 2 17.2 mm Size 3 22.2 mm

Variants from €15.90*

€21.90*

#1761

Electric motor for flange-mounting hydraulic pumps

E-motor power (kW): 5,5 | Type: 132S | Voltage (V): 400/690 | Ø flange (mm): 300 | Ø shaft (mm): 38

Three-phase motor 4-pole, speed 1500rpm, up to 2.0kW 230/400V, from 3.0kW 400/690V, design B3/B5 with flange and feet. Protection class IP55.

Variants from €154.00*

€669.00*

#38791

Front bearing for hydraulic pump with cylindrical shaft

BG: 2 | Interlocking: A 28x25 | Ø: 22

Particularly suitable for drives where there is a larger radial load, e.g. drive via V-belt pulley.Don't forget to order matching drive pinions for the front bearing for the hydraulic pump! You can find these on page 465 at the bottom right.

Variants from €79.00*

€99.00*

#401

Hand pump for tank construction, double-acting, double stroke

Delivery volume (cm³/rev): 12 | Pression max (bar): 380

With 4-way valve and check valve in A+B, including seal and fastening screws.

Variants from €269.00*

€269.00*

#400

Hand pump for tank construction, double-acting, double stroke

Delivery volume (cm³/rev): 45 | Pression max (bar): 280

With 4-way valve and drain cock, including seal and fastening screws.

Variants from €249.00*

€259.00*

#408

Hand pump tank

Contents (L): 5,0

Variants from €71.90*

€119.00*

#396

Hand pumps for tank construction, single-acting, double stroke

Delivery volume (cm³/rev): 25 | Pression max (bar): 350

Includes gasket and mounting screws.

Variants from €209.00*

€209.00*

#FA131241

VIVOIL HI-LO hydraulic pump BG2 11 + 19 cc, 70 - 210 bar

A new product has been added to the Vivoil product range: the HI-LO double pump. HI stands for high pressure, LO for low pressure. The HI-LO pump is essentially a double pump in which the primary pump operates at high pressure with a low flow rate, while the secondary pump delivers a high flow rate at low pressure. Below a certain pressure (decoupling pressure), the flow rate corresponds to the sum of the flow rates of the front and rear stages. Above the decoupling pressure, the rear stage operates in a closed circuit and does not deliver any flow rate. Under these conditions, only the front stage operates, whose flow rate is determined exclusively by its displacement volume, as it reaches the maximum pressure required for the application.One of the most common applications for these pumps is in presses or wood splitters. The HI-LO VIVOIL pump is essentially a double pump, with the first pump generating the high pressure and the second pump delivering the low-pressure volume flow in addition to the volume flow of the high-pressure pump for fast movements. Below a certain pressure, the cut-off pressure set by the pressure relief valve, the volume flow delivered by the double pump corresponds to the sum of the volume flows of the two pump stages. The HI-LO pump also offers many individual customisation options. Ask us about the numerous customisation options available.

€749.00*

#67066

Hydraulic hand pump with tank, double-acting with 4-3 directional control valve

A (mm): 169 | Tank capacity (L): 4,0

Hydraulic hand pumps are used in hydraulic systems where only one hydraulic movement is required. These are mostly simple systems where high pressure with low flow rate is required, such as bending tools, lifting devices, tipping devices for car trailers and smaller agricultural trailers, etc. Hand pumps are a simple and inexpensive solution for operating double-acting hydraulic cylinders. The extension and retraction of the hydraulic cylinder is controlled by the integrated 4-3 directional control valve.The hand lever is included.Connection thread: 3/8" BSP internal thread

Variants from €392.00*

€399.00*

#67064

Hydraulic hand pump with tank, single-acting

Tank capacity (L): 4,0

Hydraulic hand pumps are used in hydraulic systems where only one hydraulic movement is required. These are mostly simple systems where high pressure with low delivery capacity is required, such as bending tools, lifting devices, tipping devices for car trailers and smaller agricultural trailers, etc. Hand pumps are a simple and inexpensive solution for operating single-acting hydraulic cylinders. The hydraulic cylinder is retracted by opening the drain cock and using the weight of the load.The hand lever is included.Connection thread: 3/8" BSP internal thread

€329.00*

#FA393

Hydraulic hand pump without tank, single acting, double stroke

For universal use in agriculture and industry. The simple and inexpensive solution for operating hydraulic cylinders.

€185.00*

#394

Hydraulic hand pumps without tank, single acting, double stroke

Delivery volume (cm³/rev): 50 | Pression max (bar): 280

For universal use in agriculture and industry. The simple and inexpensive solution for operating hydraulic cylinders.

Variants from €209.00*

€209.00*

#FA212

VIVOIL hydraulic pump

Steering pump

€209.00*

#FA16330

VIVOIL hydraulic pump

€199.00*

#FA16358

VIVOIL hydraulic pump

For tractors with an intermediate flange

€209.00*

#FA64597

hydraulic pump

€235.00*

#FA16361

VIVOIL hydraulic pump

Steering pump for Lindner

€207.00*

#FA60693

hydraulic pump

€235.00*

#FA16337

VIVOIL hydraulic pump

€219.00*

#FA74401

VIVOIL hydraulic pump

€219.00*

#FA11682

VIVOIL hydraulic pump

For these types of tractors, a hydraulic pump with 19.5 cm/rev output can also be installed for heavy hydraulic work, such as front loader use, snow plows, etc.

€219.00*

Seite 1 von 4

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Hydraulic pumps and accessories

Cylinder attachments, spare parts

Elektromotore mit Flansch

Gear pumps type-assigned

Hydraulic pump set

Pump bracket, elastic coupling

Hydraulic pump accessories

Gear pumps for wheel loaders

Standard gear pumps

Standard vivoil gear pumps

Hand pumps

Gear pumps for combine harvesters

Hydraulic power units

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.