Fence connection, grounding & measurement

​ Bucket 6 kgEnsures perfect earthing even in difficult earthing conditions (e.g. dry or sandy soils)Special mixture of clay and salt attracts moisture and binds it directly in the soil around the earthing rodsCan be used for all types of earth rodsThe mixture is mixed very simply and quickly with 5 liters of water and filled into a suitably sized hole prepared for the ground rod

?The state-of-the-art multi-stage battery charger allows batteries to be charged to almost 100% of their original capacity.Automatically diagnose, restore, charge and maintain batteries over months Fully automatic switching between charging and maintenance modeThe following output options are available: 28.6 V, 29.2 V, 14.3 V, 14.6 VCharging current at 12 volts Battery: 2 A, 5 A and 10 ACharging current at 24 volts Battery: 2 A and 5 Ano risk of overchargingelectronically protected against user errors Spark-proof Overheating protection with mini fan inside Fully protected against short circuits and incorrect connections

Test range 6 - 20 volts. Measures open circuit voltage and voltage under load. (Operation without batteries)

For exact troubleshooting of electric fences. ?This device has a dual function and serves as a voltage tester and ammeter. ~Supports troubleshooting with a directional indicator, which makes it easy to identify problem areas. ~Automatic grounding. ~< br>Delivery includes block battery 9 V.

With ~built-in load resistance to simulate animal contact. With ground rod and fence contact, digital display. Indispensable for checking the electric fence, grounding, troubleshooting and checking devices. FAIE Info: All previous voltmeters only measure the fence voltage without animal contact. However, this voltmeter shows the fence voltage when an animal comes into contact - only if this is over 2000 V will your animals be sufficiently deterred.What is important about an electric fence is not the open-circuit voltage, but the voltage that the animal effectively feels when touched. This animal contact is simulated using a resistor that can be switched on. The voltage read with the resistance switched on indicates what the animal really feels. It's easy to see if there are any problems in the fence that are preventing the effective flow of electricity. These include, above all, poorly conductive strands and tapes, poor connections and inadequate grounding. Without a connected load resistor, the voltmeter is suitable for all measurements of fence voltage, device voltage or checking grounding.

Digital voltmeter for measuring the voltage of electric fencing devices, electric fences, earthing and 9 volt batteries or 12 volt rechargeable batteries.Conventional fence testers only measure the fence (high) voltage but cannot read the lower battery voltages. Multimeters can test batteries, but are damaged when testing the high voltages of electric fences.measures the high voltage at the device or fence in kilovolts (0.5 - 13.0 -> 500 - 13,000 V) and the battery/battery voltage in volts (from 3 - 18 V). Values above this are indicated by "Hi".digital display enables precise indication of the measured valueeasy and simple to operateextra long battery life thanks to energy-saving technology -> Lo = Low Batt Infocan be operated with: 1 x 9 V block battery (included)

With robust crocodile clip and closed eyelet. Cable length 100 cm.

With 2 sturdy metal eyelets. Length 100cm.

Made of hot-dip galvanized T-steel including M8 stainless steel screw for earth connection cable. Length: 1m

Made of hot-dip galvanized T-steel including M8 stainless steel screw for earth connection cable. The use of a long, 2 m earth rod is particularly recommended for very strong devices and dry, stony ground.

Set for easily extending the electric fence grounding. Consists of a 100 cm galvanized T-steel earth rod and a 3 m connecting cable with connection eyelets.

This electric fence monitoring system allows for easy, distance-independent monitoring of fence systems and sends a push notification to the KERBL World app on your smartphone if the selected minimum fence voltage is not reached or if the system fails. The desired minimum voltage can be selected directly on the SMART satellite (3, 5, 7 kV). Optionally, an alarm notification can also be sent via email. The system is mounted on the fence post or directly on the conductor (broadband) and requires no external power source. It operates on two AA batteries.... Technical Highlights:Real-time alarm notification in the app when the minimum fence voltage preset directly on the satellite is undershot (selectable between 3 kV, 5 kV, and 7 kV)No GPS tracking function is necessary, as the Smart Satellite cannot be controlled while linked to the app on the user's smartphoneThanks to the satellite's direct cloud connection, no Wi-Fi is required, making location-independent monitoring of fence systems very easyVoltage information in the app is updated at the latest after 4 hours, or sooner if the value differs by more than 1 kV from the last transmitted value. The same applies if no fence pulse is measured for 20 seconds or if the alarm threshold on the satellite is changed.Any number of satellites can be used at any location within a fence system. The only requirement is LTE network coverage at the respective location.... Technical Highlights:Real-time alarm notification in the app when the minimum fence voltage preset directly on the satellite is undershot (selectable between 3 kV, 5 kV, and 7 kV)No GPS tracking function is necessary, as the Smart Satellite cannot be controlled while linked to the app on the user's smartphoneThanks to the satellite's direct cloud connection, no Wi-Fi is required, making location-independent monitoring of fence systems very easyVoltage information in the app is updated at the latest after 4 hours, or sooner if the value differs by more than 1 kV from the last transmitted value. The same applies if no fence pulse is measured for 20 seconds or if the alarm threshold on the satellite is changed.Any number of satellites can be used at any location within a fence system. The only requirement is LTE network coverage at the respective location.

With 2 robust crocodile clips, cable length 60 cm. Made of stainless steel. Price/piece.

With 3 robust crocodile clips, cable length 2 x 60 cm. Made of stainless steel, price/piece.

Suitable for connecting all tapes and strands, including electric cables. With robust crocodile clip, cable length 100 cm, with M8 metal eyelet.

For connecting electric fence tapes and ropes in rows. Heart-shaped connection terminals. Cable length approx. 60 cm.

Connects the electric fence device to the electric fence wire or electric fence strand. Cable length 125 cm. Heart connection clamp. Eyelet M8. Stainless steel connecting parts.

bestehend aus je 1 Stück Zaun- und Erdanschlusskabel mit Krokodilklemme. Kabellänge ca. 1 m.

​Cable with M8 connection eyelets. Connects the device to the ground rod. Ideal for supply lines from the device inside the building to the ground rod or fence outside. Also suitable for connecting several earth rods together. Conductor diameter: 1.32 mm; Conductor cross-section: 1 mm²; Outer diameter: 7 mm; Resistance: 0.025 Ohm/m.

Cable with M8 connection lugs. Connects the device to the ground rod. Ideal for connecting the device inside the building to the ground rod or fence outside. Also suitable for connecting several earth rods together. Conductor diameter: 1.32mm~ Conductor cross section: 1 mm~ Outer diameter: 7mm~ Resistance: 0.025 ohm/m.

Practical on/off and changeover switch for your fence system. You have 4 choices: 0 - No voltage~ I - Plot 1 under tension~ II - Plot 2 under tension~ I+II - Plots 1+2 under tension.

The voltage tester is an important and time-saving aid when operating electric fence systems. Handling: The instrument is hooked into the fence wire using the hook and the brass tip is pressed lightly into the ground. The built-in electronics mimic the animal contact condition. When the various control lamps light up, you can determine the voltage (impact strength) precisely and thus check whether the fence is safe at any point on the fence.Displays the voltage in 8 levels, no battery required, for exact measurement.Levels : 10,000V, 8,000V, 6,000V, 5,000V, 4,000V, 3,000V, 2,000V, 1,000V

Simple device to be able to check the minimum fence voltage and thus the herding safety (min. 2,500 V) at a glance!The Pulse Flash flashes green with every fence pulse and stops at a voltage below 3,000 V. Can ideally be placed in several places on the electric fence - so you always have an overview!Is attached directly to the conductor material (suitable for tapes up to 40mm wide and ropes and strands up to 8mm ), the ground rod is simply inserted into the ground. Can also serve as an additional deterrent to wild boars! No batteries required!

For high-voltage-resistant, waterproof connection of high-voltage cables with a 1.6 - 2.7 mm