Forestry chains, ropes & winches

The high-quality Pewag ChokerPRO forestry chain is made from high-quality G12 grade material and is assembled with a push-through pin and the CH.Pro choker hook.The material thickness is 8 mm. Available in two different lengths.Advantages:Pulling force 7 tons (choked use: 6.3 tons) with an 8 mm choker chain31% higher pulling force in use than standard 8 mm G10 choker chainWeight saving of adjusted chain compared to 10 mm chain approx. 1.5 kg

8 mm,3 meters usable length with 4 shortenings, with ring and load hook, with test sticker, load capacity: at 45 - 4250 kg, at 60 - 3000 kg.

With parallel hook and end ring. The parallel hook has to be hooked into each link, so the loop cannot be tightened.

With parallel hook and end ring, additional hanging hook for shortening the chain.

Can also be used with a small tractor! The pull shell successfully prevents the back from getting caught on roots, stumps or other trees. For holes up to 50cm in diameter, for year-round forestry use (up to minus 30). Particularly robust and, at 5.3 kg, also very handy. (without chain and rope)

With straight long links, cold-resistant, drive-over-proof and non-conductive, UV-resistant

​Powerful lithium-ion battery for the Portable Winch PCW 3000 Li cordless winch.Professional performance and high efficiency provide sufficient energy to operate powerful tools over a long period of time. The battery is also characterised by particularly low self-discharge. Only 1.25 % per month. With charge level indicator, charging time approx. 45 minutes, only 1.6 kg.

Powerful lithium-ion battery for the Portable Winch PCW 3000 Li cordless winch.Professional performance and high efficiency provide sufficient energy to operate powerful tools over a long period of time. The battery is also characterised by particularly low self-discharge. Only 1.25 % per month. With charge level indicator, charging time approx. 90 minutes, only 2.6 kg.

High-strength round steel chain 8mm with ring and forged steel hooks, shaggy chain, simply hammer hooks into the wood and move. Tensile force 4000 daN*, length 2x 0.9 m, 2x 1.0 m

Made of tempered steel with an unwelded link. Simply hammer hooks into the wood and move.

​Pull cylinder with built-in release spring, installation length centre-to-centre 405 mm, total length 430 mm, stroke: 85 mm, cylinder inner diameter 35 mm, cylinder outer diameter 45 mm, piston rod 25 mm, forks with 11 mm holes, connection: R 3/8"UF AG.

​The new Pewag rope slider in material strength G12 fits perfectly with the new G12 PRO strangler chains in terms of size and tensile force.Also suitable for chains with a link thickness of 8 mm in grades 8 and 10.Chain thickness: 8 mmMax. permissible tensile force: 7000 daNWeight: 620 g.

Drop-forged, powder-coated, particularly gentle on chains and ropes thanks to its optimal straight shape. Can be used on both sides without reducing the tensile force. The extra large opening prevents the chain from jamming.

10 mm,1 meter usable length with ring and load hook, with test sticker, load capacity 3150 kg.

8 mm,3 meters usable length with ring and load hook, with test sticker, load capacity: at 45 - 4250 kg, at 60 - 3000 kg.

Construction 6x19S, bright, including rope eyelet

High-strength load hook with forged hook safety device/safety latch

Flexible vertical anchor line made of polyamide, semi-elastic safety rope with two end loops, 11 mm diameter, length 20 meters.

With its generous diameter of 10.1 mm, the MAMBO single rope provides safety when climbing indoors and on rocks. The large diameter makes the rope extremely easy to grip and allows the user to quickly become familiar with the handling and use of the safety devices. The thick sheath also contributes to the durability of the rope. Product info:Diameter: 10.1 mmRope type: (CE EN 892, UIAA) : Single ropeWeight per meter: 65 gSheath proportion: 37%Falls with a fall factor of 1.77: 7Static stretch : 8.5%Dynamic elongation: 34%Arching force: 8.5 kNConstruction: 40-fold hollow braided Material: Polyamide Colour: turquoise

Half rope for climbing multi-pitch routes and for mountaineering in rocky terrainIt is extremely grippy, easy to handle and therefore the use of belay devices. The special winding increases the service life and ensures consistently good handling.The thick sheath also contributes to the durability of the rope.The rope center marking increases comfort when Handling.SpecificationsCertification(s): CE EN 892, UIAADiameter: 8.5 mmRope type: half / twin rope< /li>Weight per meter: 47 gSheath proportion: 39%Falls with a fall factor of 1.77: 10 (half rope), 28 (twin rope) Static elongation: 8.5% (half rope), 7% (twin rope)Dynamic elongation: 31% (half rope), 30% (twin rope)Catching impact: 6 .6 kN (half rope), 9.9 kN (twin rope) Construction: 48-fold hollow braided Material: polyamide

Lightweight single rope with 9.8 mm diameter for indoor and rock climbing!The excellent compromise between weight savings and extended durability the possible uses of the rope.It is extremely easy to grip, easy to handle and therefore makes it easier to use belay devices.The thick sheath also contributes to the durability of the rope.SpecificationsCertification(s): CE EN 892, UIAADiameter: 9 .8 mmRope type: single ropeWeight per meter: 60 gSheath proportion: 41%Falls with a fall factor of 1.77 : 7Static elongation: 9.0%Dynamic elongation: 35%Cut impact: 8.4 kNConstruction: 40-fold hollow braid Material: polyamide

High-strength connex link for connecting and repairing chains, hooks, rings and accessories, easy to assemble with a hammer and pin punch

High-strength connex link for connecting and repairing chains, hooks, rings and accessories, easy to assemble with a hammer and pin punch

Practical deflection pulley with a load capacity of 500 kg. Rotatable with fastening chain 1.2 meters, up to 22 mm rope diameter.