Field sprayer parts
Antifreeze concentrate for field sprayers, 5L
Plant protection sprayers must be well protected from frost so that they can be used immediately and remain strong in performance next season. Proper spray winterization preserves the lifespan and value of your expensive machine.The timing of winterization depends on the last field treatment of a crop. This varies greatly from farm to farm and is related to the crop rotation of the farm. However, winterization should take place before the first minus temperatures to prevent damage to the sprayer caused by frost. If you can store your crop protection sprayer in a frost-proof place, you don't need to protect it against sub-zero temperatures. Thorough cleaning and maintenance is sufficient here.Here are a few tips!When carrying out maintenance and cleaning, follow the operating instructions for your sprayerOnly use high-quality antifreeze! These do not form foam, have a preservative effect on plastic and rubber parts and prevent deposits and corrosionHigh-quality concentrates can also be reused next winter!Use concentrates because the When cleaning, water always remains in the syringe and diluted ready-made solutions are diluted even further.Approximately 20 liters of antifreeze concentrate are sufficient for one mounted syringe. For a self-propelled vehicle it can be up to 60 liters.For more detailed information about the amount of concentrate, please refer to the instructions for use from the respective manufacturer.It is particularly important that all of those parts are passed through which spray liquid will come into contact with the antifreeze concentrate.Special antifreeze and corrosion protection for field sprayers for dilution. Protects the nozzles and seals. 50% concentrate up to -37C, 40% concentrate up to -25C and 30% concentrate up to -15C.Color redContents: 5L
Content: 5 l (€5.58 / 1 l)
Cap with round hole and seal, Quick TeeJet
Quick TeeJet cap with round hole and seal in the color red. Suitable for the following TeeJet nozzles: AIXTXA ConeJet, FL FullJet, TG Full Cone, TK FloodJet, TX/TXA ConeJet, hose nipple for nozzle body
Cap with seal for AI3070, light green
Gasket for nozzle cap
Inner 9.0 mm, outer 19.5 mm, thickness 3.5 mm
Glycerin pressure gauge with spread scale
Rear connection, R1/4?, 63 mm
Glycerin pressure gauge with spread scale
R 1/4?, 63 mm
Injector double flat jet nozzle AI3070 TeeJet
AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .
Injector double flat jet nozzle AITTJ60 TeeJet
Application: Area sprayingInjector nozzle with double flat jet, 110 spray angle each.Angle of 60 between the two spray jets directed forward and backwards.Drop size like long AI TeeJet, therefore very low drift from 1.5 to 4 bar , optimal pressure for the effect from 4 bar, drift reduction excellent.Good lateral attachment to upright target surfaces and intensive penetration of tiered foliage.Large, round cross-sections for liquid and air increase operational safety and minimize wear.Two outer and inner air intake holes, injector insert can be removed if necessary.Automatic alignment of the spray jets with Quick TeeJet cap Order No. 66757.When using the nozzle with a fastening cap from a manufacturer other than TeeJet pay attention to the orientation of the nozzle. The black dot on the nozzle must point in or against the direction of travel.
Injector flat jet nozzle AIC TeeJet
Application: Liquid fertilization, surface sprayingPlastic versionVery low drift at 2-4 bar, optimal pressure for the effect 4-8 bar, JKI loss-reducing, Very good drift reduction.Thanks to the injector principle and depending on the properties of the crop protection product, drops with air pockets are possible.Larger drops can burst on the target surface, smaller drops that are created improve the deposition.The AI nozzle mouthpiece pressed into the Quick TeeJet cap ensures automatic alignment of the spray jet.
Injector flat jet nozzle AIXR TeeJet
Application: surface spraying, liquid fertilization110 spray angle, injector technology, especially designed for the low pressure area, flat jet spray pattern.Compact dimensions with a length of 22 mm reduce the risk of damage.The injector principle produces larger drops, depending on the preparation Air pockets are also possible.Removable injector insertPressure range from 1.0 to 6 bar, optimal pressure 2 to 3.5 bar.Drift reduction very good, reducing JKI lossesAutomatic alignment of the spray jet with Quick TeeJet cap Order No. 66756
Nozzle filter made of plastic/stainless steel, 50M, blue
Pressure reducing and Control valve 23120
TeeJet pressure reducer &~ Control valve model 23120 made of plastic with spring made of stainless steel 302 and EPDM seal. The regulation takes place via a bypass. Any pressure can be set within the pressure range specified for the respective valve. Once selected, the pressure is secured by the lock nut. Particularly large passage cross-sections minimize flow resistance.Inlet 3/4"~ Male thread, output 3/4"~ Internal thread, pressure gauge connection 1/4"~ Internal thread.Setting range: 0 - 10 bar
Single nozzle body QJ17560A for pipelines
Available for 20 mm, 25 mm, 1/2?, 3/4? and 1? pipe.ChemSaver diaphragm check valve for drip-free shut-off. Standard diaphragm opens at 0.7 bar (10PSI).Membrane made of EPDM as standard, optionally made of Viton.Mounted via a 9.5 mm (3/8?) hole in the pipe.
Suction filter PVC for PTO pump MT20/25
With double crossed relief networking. Hose connection 30 mm, height 60 mm, outer 140 mm.
Suction filter PVC for PTO pump MT300
Hose connection 40 mm, height 96 mm, outer 150 mm.
Triple nozzle body 24216A for pipelines
3-way nozzle body for quick changing of nozzles of different sizes/spraying characteristics.Stop position between the spraying positions.ChemSaver membrane check valve for drip-free shut-off. Standard diaphragm opens at 0.7 bar. Membranes made of EPDM as standard, optionally made of Viton.Maximum operating pressure 10 bar.1/2"~ and 3/4"~ Versions with a hexagon socket in the top clamp for attachment to flat surfaces and rod profiles.Mounting via a 9.5 mm hole in the pipe.Maximum flow 6.1 l/min at 0.34 bar pressure drop, 8.6 l/ min at 0.69 bar pressure drop.
TTI TeeJet injector flat jet nozzle
Application: surface spraying, liquid fertilization110 nominal spray angle, injector technology, flat spray pattern, hybrid of the patented TT Turbo TeeJet and AI injector nozzle.Patented design with large, round free cross sections minimizes the risk of clogging.Thanks to the injector principle Larger drops are generated, and depending on the preparation, air pockets are also possible.Construction made of plastic for very good chemical resistance and high wear resistance.Removable injector insert.Drift reduction excellent, JKI -loss-reducingPressure range 1-7 bar, optimal pressure in terms of effect 3-7 bar.Automatic alignment of the spray jet with Quick TeeJet cap Order No. 66757
Water-sensitive paper, size 76x26 mm, 50 cards
These specially coated papers are used to evaluate liquid distribution, degree of coverage, droplet density and penetration in plants. Water-sensitive paper is yellow and turns blue when water-containing splash drops hit it. The water and oil sensitive papers sold by FAIE are manufactured by Syngenta Crop Protection AG.
Water-sensitive paper, size 76x56 mm, 50 cards
These specially coated papers are used to evaluate liquid distribution, degree of coverage, droplet density and penetration in plants. Water-sensitive paper is yellow and turns blue when water-containing splash drops hit it. The water and oil sensitive papers sold by FAIE are manufactured by Syngenta Crop Protection AG.
XR TeeJet flat jet nozzle
Application: Surface sprayingPlastic versionPrecise liquid distribution over a larger pressure range 1-4 bar.Ideal for devices equipped with controls.Reduces drift at lower pressures and achieves better coverage at higher pressures ,Drift reduction good.Automatic alignment of the spray jet with Quick TeeJet cap Order No. 66756.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
