Werkzeuge & Maschinen

-16 %

#FA127546

Unicraft Battery starter SB 501

Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction

€399.90* €474.00* (15.63% saved)

-8 %

#FA128486

Aircraft Compressed air hose reel DST 8/32 30m rotatable

For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar

€119.90* €129.95* (7.73% saved)

-14 %

#FA129139

Milwaukee Drill cassette SDS+MX4 7-piece

With perfectly round holes for optimum anchor seating thanks to the symmetrical 4-flute geometry (4 x 90°).New, sharper tip design with higher angle for easy spot drilling with maximum precision and improved performance on rebarsOne-piece, fully welded carbide tip at 5-10 mm and one-piece, slotted carbide tip at 12-32 mm for optimum service life4-blade geometry: The large-volume 4-blade geometry ensures optimum removal of dust and dirtCentering tip for easy and precise spot drillingWelded solid carbide tip at ⌀ 5-10 mm. Enables wider flute entry, resulting in higher speed. More carbide leads to greater tip durability and a longer service life4 break points crush the material more efficiently, ensuring faster drillingImproved rebar protection for more resistance when hitting rebarNew variable flute design. The thin flute at the tip ensures maximum chip evacuation, higher speed and less friction. A thick flute at the base ensures greater stability and less drill breakage. Up to 20 % more holes per battery charge compared to 4-cutter drill bits in concrete and the previous generation.PGM-certifiedMade in GermanySet consisting of:Drill Ø 5 | 6 x 115 mmDrill Ø 6 | 8 | 8 | 10 x 165 mmDrill-Ø 12 x 160 mm

€57.95* €67.50* (14.15% saved)

-17 %

#FA61225

Aircraft Holding device f. knife f. 54609

€47.90* €57.90* (17.27% saved)

-23 %

#FA129102

Milwaukee HSS-G 25-piece drill bit cassette Thunderweb

THUNDERWEB's conical shank ejects hot chips quickly, improves heat dissipation and ensures a longer service lifeDrill tip 135° - Extremely precise start, no drill bit run-out.The model is characterized by a tapered web that becomes thicker towards the rear of the drill bit. The special THUNDERWEB core is thicker than a standard drill bit, even at its narrowest point.Generous housing thickness.The polished surface reduces friction and extends the service life of the drill bit, Impact-resistant ABS housing with reinforced corners.Features higher power and torque.

€99.95* €129.90* (23.06% saved)

to the product

-5 %

#FA126047

EINHELL Kompressor TC-AC 420/50/10 V

The Einhell TC-AC 420/50/10 V compressor achieves a high air output thanks to the 2-cylinder compressor, The 50 l tank offers sufficient air reserves Features:Oil lubrication ensures a long service lifeOil level check via sight glassThe 50 l tank offers sufficient air reservesHigh air output thanks to double compressor unitMany applications can be regulated up to 10 bar using a pressure reducerPressure gauge and quick-release coupling for regulated working pressurePressure gauge and quick-release coupling for unregulated tank pressureLarge wheels and transport handle for easy transportationVibration-damped feet ensure a secure stand10-year guarantee against rusting through of the boilerNon-return valve, safety valveA drain plug enables convenient maintenanceTechnical data:Mains connection 220-240 V | 50 HzMax. Motor power 2200 W (3 HP)Motor speed 2850 min^1- Pump speed 2850 min^1- Suction capacity 420 L/minDischarge capacity at 0 bar 245 L/minDischarge capacity at 4 bar 200 L/minDischarge capacity at 7 bar 150 L/minMax. Operating pressure 10 barBoiler capacity 50 LNumber of cylinders 2 STKSound pressure level LpA 73.4 dB (A)Sound power level LwA 97 dB (A)Translated with DeepL.com (free version)

€339.90* €358.00* (5.06% saved)

to the product

-42 %

#FA131010

Pro-Compact 5 m tape measure

Self-supporting side-extension tape – measures up to 2 m without kinking.Finger-stop function for quick and controlled retraction of the measuring tape.Self-supporting tape extension – measures up to 3.2 m without kinking.Wire-braced belt clip for easy attachment and reduced wear on your pocket.Ergonomic design for a better grip and precise handling.Tear-resistant tape coating strengthens the first 15 cm of the tape.Eyelet for secure attachment of a lanyard.

€12.95* €22.20* (41.67% saved)

-20 %

#FA128143

Aircraft PSM3 Pro Mini polishing sander

Mini polishing sander - precision in a small formatIdeal for fine polishing and sanding work in hard-to-reach areas. Whether in the workshop, on the car or for DIY projects - the compact mini polishing sander ensures perfect results. Thanks to its handy size and powerful motor, it is versatile and enables precise work even on sensitive surfaces. Included in the scope of delivery: Velcro pad 76 mm, one soft and one hard polishing sponge 90 mm as well as a lambskin polishing pad with 80 mmTechnical data:Average air requirement: approx. 340 l/min Working pressure: 6.3 barConnection thread: ¼” Mounting spindle: M6

€199.95* €249.90* (19.99% saved)

-13 %

#FA124572

Unior Reversible ratchet 1/2" strong

The ratchet has a high level of durability and transmits up to 700 Nm of torque.This is achieved with a durable mechanism with only 24 teeth and a long handle. Due to its robustness, it is used for loosening or screwing stubborn screw connections, such as B. used on tire rims in cars.Material: Premium Flex chrome vanadium steelHousing drop-forged chrome-plated according to industry standard ISO 1456:2009Advantages:High durabilitylong lever (465 mm)24 teeth

€99.95* €114.50* (12.71% saved)

-9 %

#FA61224

Aircraft Slide rail basic bracket for 54609

Slide rail basic bracket for wet and dry sander NTS 251

€37.95* €41.90* (9.43% saved)

-22 %

#FA131040

Milwaukee Torx wrench set, 7 pieces, with impact cap and holder

T-STRIKE™ features a striking cap to protect the tool and allow for better access to worn or rusted screws – with a continuous short side and a long side with a TX tip for Torx screws.Easy size identification thanks to clearly visible markings on the tool and tool holder.T-handle tool holder, magnetic or screw-mountable, for simple and optimal workshop organization.Contents: TX 9, 10, 15, 50, 25, 30, and 40.

€89.95* €114.95* (21.75% saved)

-30 %

#FA122098

4-piece satin finishing set for drilling machine

High-quality satin finishing set for surface finishing of stainless steel, steel, brass, copper, aluminum. Universal 6mm dowel pin for all drills. 1 brush each coarse/medium/fine with 100mm diameter.

€27.99* €39.95* (29.94% saved)

-19 %

#FA28836

Mega 5-ton telescopic jack

High-quality hydraulic press with 5-ton lifting capacity. Features a two-stage cylinder with a total height of 500 mm and a minimum height of 215 mm.

€159.90* €198.00* (19.24% saved)

-14 %

#FA131041

Milwaukee 7-piece Allen key set with impact cap and holder

T-STRIKE™ features a strike cap to protect the tool and allow better access to worn or rusted screws.The ball head on the long side facilitates access to screws and allows working at angles of up to 30°.Easy size identification thanks to clearly visible markings on the tool and tool holder.T-handle tool holder, magnetic or screw-mounted, for simple and optimal workshop organization.Contents: 2, 2.5, 3, 4, 5, 6, and 8 mm.

€89.95* €104.95* (14.29% saved)

#26058

Abrasive fleece 229x152mm

Version: mittel

Premium fleece with a long service life

Variants from €2.36*

From €3.59*

to the product

-11 %

#FA132373

Milwaukee Advent calendar

The perfect advent calendar for every tool/Milwaukee enthusiast.A high-quality and practical gift every Advent weekend.Contents:Toolguard wall-mounted bottle opener – a must-have for any workshop,355 ml thermal water bottle with twist-off drinking cap – 100% leak-proof in any position,Miro ratchet with 5 bits and carabiner for small screwdriving jobs,15-piece bit set with all essential bits and a magnetic storage box,and a folding Stanley knife with a replaceable blade and a handy belt clip.

€79.99* €89.95* (11.07% saved)

-28 %

#FA49336

Erba Base cabinet 3 drawers � modular system

Lockable base cabinet 3 drawersDimensions including feet WxDxH: 670x465x845mmDimensions per drawer: WxDxH: 570x350x218mmmax. Load capacity: 35kgball-bearing drawersheight-adjustable feetIncl. 2 Keys

€199.95* €279.00* (28.33% saved)

-38 %

#FA114533

EINHELL Battery charger PXC Twincharger Power X-Change

Universally usable for all Power X-Change batteries. Parallel, rapid charging of two batteries is possible using fast charging technology, with integrated refresh mode for reactivating deeply discharged batteries. Current charging status display via 6 LEDs. Ideal for 36V applications.

€49.95* €79.95* (37.52% saved)

-27 %

#FA117860

Hikoki Battery combo kit Li-PAK 004

Professional cordless machine set with impact drill DV18DBS with 2-speed gearbox and brushless motor for torque up to 70 Nm. Can be used in all materials thanks to the impact function. Cordless angle grinder G18DBL 125mm with brushless motor for high performance and long service life. Complete set with the 2 machines, 3x Li batteries 18V / 5.0 Ah, charger and two matching HIK system cases.

€399.95* €549.90* (27.27% saved)

-14 %

#FA129044

Milwaukee battery starter set with 2 batteries and charger included

Starter set with 2 x 18V/5.5Ah High-Output, 1 x 12V/3.0 Ah battery and combined 12/18V quick charger.

€299.90* €349.00* (14.07% saved)

-23 %

#FA131375

Milwaukee Battery-powered tool set FPP6H3-502B

This powerful Milwaukee M18 battery set is designed for professional users who demand uncompromising performance, robustness, and versatility. Perfectly suited for construction sites, workshops, and assembly work, this complete package offers everything needed for demanding tasks.High-performance tools at a glance (battery and charger not included)M18 FPD3 Cordless Impact Drill DriverExtremely powerful with up to 158 Nm of torque – ideal for the toughest drilling and screwdriving applications in wood, metal, and masonry.M18 FIW2F12 Cordless Impact Wrench (1/2")Compact and powerful with 4-stage control and up to 339 Nm maximum torque – ideal for precise and controlled work, even in delicate applications.M18 FCS552 Cordless Circular SawPrecise cuts thanks to a 45° bevel setting and a cutting depth of up to 57 mm – ideal for all types of woodworking.M18 FSZ Cordless Reciprocating SawPowerful cutting performance with a 32 mm stroke – enables cuts up to 300 mm in wood and 20 mm in steel, perfect for demolition and installation work.M18 FSAG125X Cordless Angle GrinderWith a 125 mm disc diameter and performance comparable to a 1200-watt corded tool – for efficient cutting, grinding, and deburring.M18 TLED Cordless Work LightRobust work light with a swiveling head. For optimal illumination, even in hard-to-reach areas.Fully equipped for immediate use:The action set also includes:2 x M18 batteries (18V / 5.0 Ah) for extended runtimesCharger for fast rechargingPractical carrying case for safe and convenient transportConclusion:A well-designed professional set for maximum productivity – cordless, powerful, and reliable. Ideal for tradespeople, installers, and anyone who demands the highest quality from their tools.

€998.00* €1,298.00* (23.11% saved)

to the product

-15 %

#FA125240

Milwaukee Blower attachment M18BA

With this attachment you can transform your Milwaukee battery base unit into a powerful universal leaf blower in a matter of seconds. ~Thanks to the optimal speed and the perfectly shaped housing, the blower achieves an air output of up to 14.2 m at 193 km /h. ~An ideal tool for cleaning driveways and walkways or collecting leaves in your garden.

€169.95* €199.90* (14.98% saved)

-16 %

#FA21906

Brake bleeder/oil suction device compressed air

enables a clean oil change by suction - suitable for engine, transmission and rear axle oils and other non-corrosive liquids - suction hose diameter in 9.8 - 8.0 - 6.7 - 4.5 mm for suction through the oil dipstick -Tube - 7.5 l container, with foot for a firm stand, for holding large amounts of oil - suitable for extracting oil from e.g. Smart but also for all other vehicles where an oil change needs to be carried out without using a lifting platform - with special silicone Brake bleeding hose with valve for one-handed operation - makes it easier to bleed brake systems on all vehicles - the built-in hand vacuum pump enables brake bleeding even without a compressed air connection.

€249.90* €298.00* (16.14% saved)

-18 %

#FA43511

Werther Brake fluid changer model 686

For changing brake fluid quickly and easily. The 2-chamber system prevents the formation of air bubbles. Complete with 8-piece accessory set.

€399.90* €489.00* (18.22% saved)

Seite 1 von 6

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.