B-grade goods

ABVERKAUF aus TRANSPORTSCHADEN - Sockel mit Befestigungslöcher siehe Fotos​E-Motor mit Flansch für Kreissägeblätter mit Bohrung 30 mm. Leistung: 5,5 kW /1350 U/min, 50 Hz, 380 V, ohne Schalter, mit Flansch, Wellendurchmesser 30 mm, Höhe 190 mm, Breite 190/245 mmACHTUNG: dieser Motor ist nicht standardmäßig für ältere Maschinen, die mit einem Stern-Dreieck-Schalter ausgerüstet sind. Bei Verwendung der Stern-Dreieck Schaltung muss zusätzlich der Schalter mit der Bestellnummer 46686 verwendet werden.

​B-grade item, pump is used but fully functional and in good condition.Compact and robust wastewater pump with an oil-filled submersible motor, 0.55 kW/230 volts. Maximum flow rate: 230 L/min, maximum delivery head: 8 m, 5/4" female thread connection.Dimensions: Height only 410 mm, diameter 245 mm.Thanks to its special level controller and compact design, it is ideal for wastewater shafts in confined spaces, e.g., cleaning milking parlors, seepage pits at drive-over silos, etc. Float switch activation range: min. 10 cm, max. 20 cm.

​High-quality feed steamer with fireclay insert SAUGUT by FAIE. Manufactured in Europe from high-quality AISI 430 stainless steel, ensuring an extremely long service life.A damper for generations! Tiltable kettle made of stainless steel - for a wide range of uses and the greatest possible hygiene. The boiler has a large fire pit with a generous fireclay lining, which guarantees you perfect use of the fuel, optimal use of heat and very good heat storage.Technical data:< br>Boiler volume: approx. 120 litersL x W x H: 80 x 81 x 125 cmSmoke pipe connection: 120 mmWeight: 52 kgSteaming time: approx. 100 minutesFilling quantity : approx. 80 kg (potato)Outer bowl diameter: 60 cmInside bowl diameter: 56.5 cmInside bowl height: 44.5 cm ~Transport damage/bent according to photo  

Metal wheel 2.0 Basic suitable for many motor mowers up to a weight of 150kg. The metal wheel has a diameter of 420mm (corresponds to rubber tires 4.00 x 8), a width of 190mm and the centering hole has a diameter of 60.5mm. The fastening hub is made with 2 hole circles 4x100mm. A hole circle with the hole diameter for M12 collar screws and a hole circle for fastening with cone screws with a hole diameter of 15mm. The cone rings are welded into the hub.The delivery consists of a pair of metal wheels!The powder-coated metal wheel has a hardened tread on the outer contour and is therefore very resistant to abrasion. Thanks to the nested and welded construction, the wheel is very stable. How it works!Due to the offset outer contour or the overlap of the wheel lugs, a closed radius is created. This creates a closed radius You get perfect concentricity on hard surfaces such as a road without vibrations or shock loads on the driver and drive axles.The design of the wheels ensures a gentle crop flow of the forage from the knife bar right behind the wheels. Due to the geometry of the wheels, there is no wrapping the axles with food. The metal wheels 2.0 are designed in such a way that they clean themselves while driving. When mowing on soft ground, the wheel cleats engage in the ground. By immersing the driving lugs into the ground, the inner radius and the connecting struts are now the new running surface of the wheels. The controlled immersion of the driving lugs creates a uniform linear drive in which there is hardly any pulling to one side - regardless of whether it is on a slope or with uneven meadow vegetation.Another positive effect is the ground footprint that the driving lugs leave by immersing it in the ground. This footprint promotes water absorption on steep slopes. The metal wheel 2.0 Basic is suitable for motor mowers weighing up to 150kg. For heavier mowers, a wider version is recommended. In this case, please contact us or fill out the inquiry form available for download with the required technical data and send it to us. You will then receive a tailor-made offer for the right pair of metal wheels for your motor mower.Scope of delivery: 2 pieces of metal wheels

​This mobile milking machine is used, having only been in operation for a few days. It comes with new milk hose (sold by the meter) and has one year of remaining warranty.Mobile goat milking machine made of stainless steel, complete, 230V, with two milking groups for goats.Vacuum pump 230-250 liters/min, 25-liter stainless steel milking bucket, pulsator with a 60:40 cycle time and 90 strokes/min. Includes vacuum regulating valve, pressure gauge, overflow valve on the bucket lid, and drain valve on the underside of the frame.The radial vane pump ensures a very stable vacuum and smooth operation. It is easy to use and ready for immediate use. The milking machine is partially assembled upon delivery.

B-Ware mit Kratzer in der Beschichtung. Die Wandkonsole ermöglicht eine einfache und platzsparende Befestigung der Spülwanne an der Wand. Das verzinkte Stahlrohr ist kunststoffbeschichtet, sehr robust und korrosionsbeständig. Lieferumfang: Inklusive 4 Wannenhalter