Tools & machines

​This Milwaukee accessory contains 11 saw blades for practically all applications. Contents:2x35mm plunge cut saw blade 2x65mm plunge cut saw blade1x65mm plunge cut saw blade with Japanese tooth2x28mm plunge-cut saw blade multi-material 2x43mm plunge cut saw blade multi1x segment saw blade 1x 52mm scraper.

​Suitable for cuts in wood and metal. 5 piece pack

​High-quality set including 4-12mm concrete drill bits, 3-10mm HSS-G metal drill bits, and a comprehensive assortment of impact-resistant bits.All tools feature a direct 6-point shank for compatibility with all standard drills and impact drivers with a 6-point shank.

​High-quality concrete drill bits from 4-12mm and HSS-G metal drill bits from 3-10mm, plus a comprehensive range of impact-resistant bits.For all standard screwdrivers and impact drivers with a 6-point shank (bits) or drill chuck (drill bits).In a practical plastic case.

​Mobile piston compressor with oil-free, direct-coupled V-unitsDeveloped for demanding continuous use when oil-free and clean compressed air is requiredAir is blown through the cooling chambers of the cylinder by means of a fan; this achieves optimum coolingLarge piston, movably mounted, thus 60% more power compared to tilting piston systemsCylinder running surfaces with high-precision and micro-smooth surface for minimum frictionThe high-performance piston or piston ring made of a special graphite-Teflon-carbon mixture has a much longer service life than a simple piston ring made of TeflonHigh-quality maximum equipment:Filter pressure regulator for infinitely variable adjustment of the working pressure, with simultaneous dirt, oil and condensate separationOne compressed air outlet each for filtered compressed air, filtered and lubricated compressed air and a direct outlet on the compressed air tankTwo convenient safety quick-release couplingsHigh-quality CONDOR pressure switchOne pressure gauge each for tank and working pressureSimple condensate drain via ball valveCompressed air lines and tanks with long service life:Flexible armored hose line with heat protection prevents vibration fracturesInternally and externally hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting throughComfort safety quick-release couplings:One-hand safety couplings in accordance with DIN EN 983 from AIRCRAFT, the first manufacturer to use them as standardTwo separate locking systems for maximum work safetyNo whipping of the hose line when uncouplingConvenient transportation:Back-friendly transportation in an upright position and without liftingAdditional transport handle directly on the containerPuncture-proof PU foam wheelsSturdy steering chassis with parking brakeReady for immediate use:Fully automatic on/off operationWith all safety devicesCompletely ready for connectionTechnical data: Supply voltage: 400 V Mains frequency: 50 HzOutput power: 2.3 kW Input power: 3 kWNoise emission:Sound pressure level Lp: 75 dB(A) Compressor: Oil-free Suction capacity approx.: 510 l/minFilling capacity approx.: 300 l/min Explanation Filling capacity: at 6 bar working pressureNumber of cylinders: 4 Number of compression stages: 1Compressor speed: 1400 min¯¹ Compressed air tankMaximum pressure: 10 bar Tank capacity: 200 l

Compact, versatile vacuum cleaner in dust class L with integrated filter cleaningQuick coupling of metaBOXes with tools and accessories on the vacuum cleaner for easy location changesWet/dry vacuum cleaner with commercial approvalFor vacuuming on power tools and for cleaning construction sites, workshops, etc.Power socket for a power tool for using the vacuum cleaner's automatic on/off switch PressClean: manual filter cleaning by means of a strong air flow when the switch on the vacuum cleaner is pressed during breaks in workUser protection: certified according to the EU standard for dust of dust class LSuction stop during wet vacuuming when the maximum filling level is reachedAutomatic overrun for completely emptying the suction hoseAntistatic basic equipment prevented static charge when using the appropriate accessoriesEasy transport thanks to cable and hose holder as well as depot for pipes and nozzlesPractical accessories depot and storage areaPractical accessories compartment with hinged lid for small partsIncluded vacuum accessories with quick system for quick conversion in use ~Characteristics:Air output max.: 4200 l/min Negative pressure: 225 hPa (mbar) Filter area: 3500 cm Absorption capacity max.: 1200 WContainer volume: 30 lSuction hose : 32 mmHose length: 3.2 mWeight: 10.8 kgCable length: 5.5 mNoise emission Sound pressure level: 78 dB(A) Measurement uncertainty K: 2.5 dB(A) ~Scope of delivery:Suction hose Quick ( 32 mm / 3.2 m)Connection sleeve Quick 28/35 mmHandle adapter Quick Professional3 suction tubes made of plastic, fleece filter bag, crevice nozzle, floor nozzle (300 mm wide), suction nozzle (120 mm wide) ~  ~  ~  ~  ~  ~  ~  ~  ~  ~  ~  ~  ~

​The fast-charging 36 V / 10 Ah battery for professional applications delivers exceptionally high performance and has integrated Bluetooth connectivity for connection with Fleet Services™. Designed for optimum productivity and long runtime in all weather conditions (IPX4). It also features active cooling and intuitive LED indicatorsTechnical data:Battery capacity: 9.0 AhBattery energy: 330 WhBattery type: Li-IonBattery voltage: 36 VWeight: 2.0 kg

​The V 421 C battery charger from Güde is suitable for starting motor vehicles as well as charging and fast charging 12 V and 24 V vehicle batteries with capacities from 20 to 800 Ah. Equipped as standard with a reliable and interference-free analog ampere display, 2 m long charging cable, reverse polarity and thermal protection as well as fully insulated battery terminals. The scope of delivery also includes 10 additional fuses (50 A). Weighing just under 16 kg, the device is also easy to maneuver thanks to its large wheels, making it the perfect companion in the vehicle workshop. for charging, fast charging and starting vehiclesSuitable for 12 V and 24 V batteriesinterference-free analog ampere displaywith 10 additional fuses (50 A)thermal and reverse polarity protection2 m long connection cableFully insulated battery terminalsEasy to transport thanks to 2 castorsBattery types: PB, WET, PB - lead-acid battery (also MF), WET - wet battery Technical dataMains voltage: 230 VFrequency: 50 HzOutput voltage: 12 / 24 VFuse protection, slow-blow: 16 AMains power: 8000 WCharging current rms: 60 ABattery capacity: 20 - 800 AhNumber of fuses: 10 pcs.Fuse: 2x 50 AJump-start device 1.5 V: 240 AJump-start device 0 V: 390 ABattery start without pre-charging: 35 - 50 AhBattery start with pre-charging: 65 - 100 AhLength: 330 mmWidth: 250 mmHeight: 600 mm

​Universally applicable device for daily use by professional users in repair, bodywork and car workshopsFor all vehicle types with 12 or 24 volt batteriesFor petrol vehicles up to 10 l displacement and diesel vehicles up to 6.5 l displacementSimple and ergonomic handlingProtects the vehicle electronics from damage during the starting processProtection against voltage peaks and incorrect polarityIntegrated battery charger for charging the internal batteryDirect charging of the starter inside the vehicle via connection cable to the cigarette lighter General information:Charging capacity: 2 x 22Ah Starting voltage: 12 / 24VPeak starting current: 3000 / 2000A I-Start: 1000 / 600ADimensions and weights:Length approx.: 380mm Width/depth approx.: 190mmHeight approx.: 420mm Weight approx.: 18kgElectrical data:Supply voltage: 12/24V Range of applicationSuitable for battery types: Wet, gel, AGM Starting area of application: motorcycle, car, kB, kT, truck, boats, truck<7.5t, truck>7.5t, commercial vehicle, construction

​A pressure water pump for clear water with flexible drive shaftTightly sealed battery compartmentUp to 900 l water transfer with one M18™ 5.0 Ah battery chargeAt 3.4 kg, this 18 V cordless transfer pump is lighter than comparable corded devicesMaximum flow rate of 1817 l/h, up to 908 l per M18™ 5.0 Ah battery chargeThe REDLINK™ electronics switch the device off automatically when no more water is being sucked inThe flexible drive shaft and powerful motor achieve a maximum suction height of 5.5 m and a maximum delivery height of 23 m¾˝ external thread for standard water connections. A hose with an internal diameter of 19 mm is recommended for optimum performanceOnly suitable for clear waterTechnical data:Voltage: 18 VBattery: Li-ionWeight: 3.4 kgSystem: M18

Powerful audio system - DAB+/FM receiver with digital processor delivers high reception accuracy and signal clarity Supplied without battery and charger FAIE Nr. 125562Digital Bluetooth® receiver, plays music at a distance of up to 30 mdistance from your smartphone, computer or tabletIntegrated handles and storage options on board allow for easy transportation and storage of cell phonesTwo 8.89 cm tone controls for balanced and clear soundDual tweeters with a clear treble soundCustomizable tone control for improved sound quality and presets for 18 stationsShock-absorbing metal end caps and speaker grille protect against drops, water and dirt on the construction siteProtected USB-C socket charges electronic devices in both AC and DC mode Power supply via MILWAUKEE® M18™ rechargeable batteries or mains connectionUp to 13 hours operating time with one M18™ REDLITHIUM™ 5.0 Ah battery pack Supplied without battery and charger

Blast furnace slag for sandblasting guns - versatile, effective, sustainableOur blast furnace slag is the perfect abrasive for all sandblasting guns and systems. Ideal for cleaning, sanding and derusting metal, wood or stone. The slag impresses with its hardness and durability - for thorough results without leaving any residue. Thanks to its even grain size, it ensures a precise blasting pattern and is reliable even with stubborn dirt. Contents: 1.5 liters, grain size 05 - 0.8 mm.Blast furnace slagSuitable for every sandblasting gun and systemfor cleaning, grinding and derusting

Blast furnace slag for sandblasting guns - versatile, effective, sustainableOur blast furnace slag is the perfect abrasive for all sandblasting guns and systems. Ideal for cleaning, sanding and derusting metal, wood or stone. The slag impresses with its hardness and durability - for thorough results without leaving any residue. Thanks to its uniform grain size, it ensures a precise blasting pattern and is reliable even with stubborn dirt. Content: 25 kg, grain size 0.2 - 0.5 mm.Blast furnace slagSuitable for every sandblasting gun and systemfor cleaning, grinding and derusting

​BP PRO EXL blow gun - With extra-long blow tube for cleaning particularly hard-to-reach areas1000 mm long blow tube and side jet nozzle ensure optimum cleaning of hard-to-reach areasThe air connection can be made either at the head or handleApprox. 100 % higher air flow thanks to Venturi nozzleBlow tube with foam insulation for a good grip without cold hands

The 3-piece kwb brush cleaning set consists of a disc brush, a cup brush and a sanding mop plate for use with an angle grinder.The disc brush is equipped with 20 braids made of 0.5 mm thick HSS wire. The usable wire length is up to 22 mm. ~The cup brush is covered with corrugated, stainless steel wire with a usable wire length of up to 21 mm. ~The sanding mop plate with 80 grit has eighty slats glued to the plate in a scale-shaped manner. The diameters of the tools are- 115 mm for the disc brush and the sanding mop disc,- 75 mm for the cup brush.The disc brush deburrs and removes paint and rust. The cup brush cleans large areas. The sanding mop plate is used for sanding and finishing. This compilation in one sentence is unique.

Husqvarna QC250 is a 250 W fast charger for part-time operation, ideal for Husqvarna BLi20/30 batteries. With active battery cooling and convenient desktop design. Can also be easily mounted on the wall. Weight: 0.7 kg.

​High-quality combination workshop sander with 250 watts/230 volts, 2,980 rpm, disc diameter 150/20 mm, Sanding belt 686/50mm, Own weight approx. 7Kg.

​Compressed air blow guns are versatile tools that are used in workshops, industry and trade. They are ideal for removing dust, dirt and chips from work surfaces, machines and workpieces. The blow-out gun is simply connected to an air compressor and enables precise, powerful cleaning even in hard-to-reach places. In addition to cleaning, compressed air blow guns can also be used to dry or cool components.Length: 110 - 300 - 500 mmMetal blow-out pipePlastic handles

​For ceiling and floor mountingPolyurethane hose with fabric insertWith kink protectionCan be rotated 360° on the baseHighly flexible and abrasion-resistantWith rubberized feetFolding handle includedTechnical data:Inner diameter of hose: 8 mm Operating temperature min.: -30° CMax. operating temperature: 65° C Hose outer diameter: 12 mmHose length: 30 m Connection hose inner diameter: 8 mmConnection hose outer diameter: 12 mm Hose material: Polyurethane with fabric insertConnection hose length: 1 m Operating pressure. 15 barBurst pressure: 45 bar

​For ceiling and floor mountingOil-resistant hybrid polymer hose with fabric insertSturdy metal housingFor ceiling, wall and floor mountingThe hose can be locked in place by simply pulling or rolled up automatically as requiredTechnical data: Hose inner diameter: 9.2 mm Hose outer diameter: 15.2 mmHose length: 15 m Connection hose inner diameter: 9.2 mmConnection hose outer diameter: 15.2 mm Hose materialHybrid polymer material with fabric insertConnection hose length: 1.5 m Operating pressure: 17 bar Burst pressure: 51 barOperating temperature: -10 - 60° C Connection thread diameter: 1/4”Connection thread type: BSPT male thread

​For wall or ceiling mountingOil-resistant hybrid polymer hose with fabric insertHousing made of impact-resistant plasticThe hose can be locked in place by simply pulling or rolled up automatically as requiredSwivel bracket for wall or ceiling mounting included in the scope of deliveryTechnical data Hose inner diameter: 9.2 mm Hose outer diameter: 14.5 mmHose length: 20 m Connection hose inner diameter: 9.2 mmConnection hose outer diameter: 14.5 mm Hose material: Hybrid polymer material with fabric insertConnection hose length: 2 m Operating pressure: 17 bar Burst pressure: 51 barOperating temperature: -10 - 60° C Connection thread diameter: 1/4”

​High-quality compressor with top equipment and sensational price-performance ratioThis high-quality compressor offers you everything you need for demanding work. It has a powerful and durable 2-cylinder compressor with a suction capacity of 510 liters per minute and a maximum pressure of 10 bar. With a filling capacity of 400 liters/min, even demanding compressed air devices can be operated without any problems.The low speed of just 1310 revolutions per minute and the V-belt pulley with integrated fan function ensure a long service life and low running noise. This means you can also work comfortably in the immediate vicinity of the compressor.The quality electric motor has an output of 3.0 kW/4.0 hp at 2800 rpm. The 100 liter tank ensures sufficient pressure storage and prevents the system from constantly switching off and on.The top equipment includes a Condor brand pressure switch, a chassis and a newly developed maintenance block with one DL extraction point each for clean air via a filter pressure regulator or lubricated air via a DL oiler for devices that require lubrication.This limited special model also has a hose reel fitted as standard with 10 meters of high-quality DL hose with an internal diameter of 8 mm as well as a connection hose and a quick-release coupling.The advantages of this compressor at a glance:Powerful and durable 2-cylinder compressorSuction capacity 510 liters per minuteMaximum pressure 10 barLow speed 1310 revolutions per minuteV-belt pulley with integrated fan functionQuality electric motor 3.0 kW/4.0 hp100 liter boilerTop equipment with Condor brand pressure switch, chassis and maintenance blockHose reel with 15 meter DL hose fitted as standardSensational price-performance ratioDon't miss out on this limited special model!

Assembly spray, the specialist for extreme conditions from -100 C to 800 C! ~Long-term corrosion protection and lubrication for assembling and dismantling various types of metal connections ~Protects metals from corrosive media (steam, fresh and salt water, diluted alkalis, many chemical vapors ) ~Also suitable as a solid lubricant ~Harmless in terms of the Working Materials OrdinanceReliably prevents seizingReduces friction lossesIdeal for threads and fitsPrevents contact corrosion on different metals Protects even against salt water, diluted acids, alkalis and chemical vapors Copper-graphite spray is silicone, PTFE, acid and resin-free or does not become resinous. Reliable protection against corrosion, wear and seizing. Gear wheels, chains, ball bearings, roller bearings, track, bearing and track rollers, sliding surfaces and slide rails are protected by the lubricity of copper-graphite spray , do not rust or jam. Press-fit bearings do not seize, even at high temperatures and high pressure. Valves, valve seat rings, grooves, pipe connections, flanges and seals are protected from aggressive media.Coarse and fine threads, nuts, screws, bolts, wedges, springs and bushings: Can be easily removed even after extreme thermal stress. Hinges, door and gate hangers, loading flaps and lock joints always remain functional.Copper-graphite spray helps, for example, on agricultural machinery and equipment, trucks, semi-trailers, trailers, conveyor belts and transport rails. Buses, garbage trucks, snow plows, concrete mixers, cranes, tank trucks, excavators, bulldozers and tractors. Military equipment such as tanks, guns, pioneer vehicles, amphibious vehicles, ships and much more.Copper-graphite spray protects against corrosion and seizing for a long time. It reduces the friction of moving parts and reduces abrasion of plastics and rubber on metal. Gives tighter connection for threads and fits. Prevents contact corrosion on various types of metal.Copper-graphite spray guarantees an application range of -100 to +800 C. Due to its chemical composition, the copper-graphite spray is extremely pressure-resistant and protects all metals against media that promote corrosion: water vapor, fresh and salt water, diluted alkalis, and many chemical vapors. Copper-graphite spray is a harmless working material within the meaning of the Working Materials Ordinance.Copper-graphite spray is indifferent to most gases, such as natural gas, butane, propane, noble gases, fluorocarbons and nitrogen. Only use with compressed oxygen is not possible.Copper-graphite spray - indispensable and practical for industry and trade!Danger and safety information:Danger: Extremely flammable aerosol. Container is under pressure: may burst if heated. Harmful to aquatic organisms, with long-term effect. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Do not smoke. Do not puncture or burn, even after use. Protect from sunlight and do not expose to temperatures exceeding 50C. Recycle contents/container.Physical and chemical characteristics ~Appearance: silver-colored ~Flash point: approx. -104 C (propane)Boiling point: -42 C ( propane) ~Relative density: approx. 0.95 g/cm ~Solubility in water: not miscible ~Lower explosion limit: approx. 1.5% by volume ~Upper explosion limit: approx. 10.9% by volume ~Temperature range : -50 C to approx. +1000 C Maximum average particle diameter of the plates and spheres: 15 m

​Robust metal housing and 13 mm drill chuckIntegrated key holderVariable, lockable speed switchPowerful angle drill with the performance of a power toolRobust metal housing and 13 mm drill chuckUp to 200 holes in 50 x 100 mm timber (22 mm auger bit) with one battery charge (5.5 Ah)The FUEL™ platform was developed for the most demanding users. The technology delivers maximum performance and combines three central components - 100% system-compatible with the MILWAUKEE®-M18™ product range Supplied without battery and charger (FAIE No. 129044)Technical data:Idle speed 0 - 1500 min-1Drill chuck clamping range 13 mmMax. Drill Ø in wood - auger bit 26 mmMax. Drill Ø in wood - self-drill 65 mmMax. Drilling Ø in wood - circular hole saw 102 mmMax. Drilling Ø in steel 12.7 mmWeight with battery approx. 4.1 kg