Hy. hoses, pipes, fittings

Our offer

-29 %

#FA41791

Blade holder suitable for RASSPE

Blade holder suitable for Rasspe drum mowers

€4.69* €6.59* (28.83% saved)

#21294

Schneider Compact multi-grab shovel with EURO holder

Version: 6 Zinken | Volume: 0,46 | Weight (kg): 240 | Width (mm): 1400

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share

Length (mm): 270 | Tine material: 25 x 8

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

ESM Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-25 %

#FA19414

Friction strip 996 mm, 1 pair

€49.00* €65.00* (24.62% saved)

-22 %

#FA34389

Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet

Color: rot | Type: 3070-04VP

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

Schröckenfux M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#43377

HDPE abrasion protection for hydraulic hoses

Suitable for hose bundles: 27-36 mm | Thickness (mm): 2,5 | Ø inside (mm): 27,0 | Ø outside (mm): 32,0

Cost-effective abrasion protection spiral made from 100% recycled HDPE. Price per meter.

Variants from €4.29*

€6.00*

#101742

Hose marking

Color: gelb

Marking arrow for identifying hose lines, arrow (alternately marked with - and +) and plastic fastening tab. Commercially available cable ties can also be used for assembly.

Variants from €0.39*

€0.39*

#FA108783

Maintenance plug 3 in 1, diameter 2 - 42mm

STOPPFIXX maintenance plug set "3 in 1" in red signal color for closing unpressurized lines during repairs and maintenance. Thanks to the 3 in 1 principle, the smallest plug is in the middle plug and these two are then contained in the larger maintenance plug, you always have the right diameter at hand. If the medium size M of the maintenance plugs is in use, the largest STOPPFIXX can be closed with the dust cap and the size S cannot be lost. Due to the adhesive effect, the plugs can be used continuously from 2 - 42mm!Temperature resistant from -45 to +120CSilicone-free, resistant to most oils and chemicals.

€29.90*

#48068

Gedore Pipe bending pliers with roller

Ø tube (mm): 12

For bends up to 90, for bendable steel and stainless steel pipes. Up to a maximum wall thickness of 1.5 mm.

Variants from €85.00*

€85.00*

#101688

Ready-to-install hydraulic hose nominal width DN06, connection 8L, M14x1.5 mm

Length (mm): 2750

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 400 bar, minimum bending radius 45 mm, weight 275 g/m, outer diameter 13.1 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Variants from €7.49*

€25.00*

#14820

Ready-to-install hydraulic hose nominal width DN08, connection 10L, M16x1.5 mm

Length (mm): 2500

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 350 bar, minimum bending radius 55 mm, weight 330 g/m, outer diameter 14.7 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 2.5 m (€9.80* / 1 m)

Variants from €7.79*

€24.50*

#14851

Ready-to-install hydraulic hose nominal width DN08, connection 1x straight, 1x 90� bent, 10L, M16x1.5

Length (mm): 1500

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 350 bar, minimum bending radius 55 mm, weight 330 g/m, outer diameter 14.7 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 1.5 m (€12.20* / 1 m)

Variants from €8.79*

€18.30*

#3567

Ready-to-install hydraulic hose nominal width DN10, 1 straight connection, 1 connection 90� bent

Length (mm): 1900

Tractor 2K with union nut M18x1.5 on both sides, tube 12L, 1 straight connection, 1 connection 90 bent, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 330 bar, minimum bending radius 65 mm, weight 395 g/m, connection 12L, M18x1.5 mmApplied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 1.9 m (€12.58* / 1 m)

Variants from €10.00*

€23.90*

#2106

Ready-to-install hydraulic hose nominal width DN10, connection 12L, M18x1.5 mm

Length (mm): 1100

Tractor 2K with union nut M18x1.5 on both sides, tube 12L, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 330 bar, minimum bending radius 65 mm, weight 395 g/m, outer diameter 16.8 mm Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 1.1 m (€14.55* / 1 m)

Variants from €8.50*

€16.00*

#15031

Ready-to-install hydraulic hose nominal width DN12, connection 15L, M22x1.5 mm

Length (mm): 1300

Tractor 2K with union nut M22x1.5 on both sides, tube 15L, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 275 bar, minimum bending radius 80 mm, weight 510 g/m, outer diameter 20.3 mmApplied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 1.3 m (€16.88* / 1 m)

Variants from €13.50*

€21.95*

#15337

Ready-to-install hydraulic hose nominal width DN12, connection 1x straight/1x90� curved, 15L, M22x1.5 mm

Length (mm): 1300

Variants from €15.90*

€24.00*

#101694

Ready-to-install hydraulic hose, nominal width DN06, connection 8L, M14x1.5, 1x straight, 1x 90� bent

Length (mm): 450

Content: 0.45 m (€21.31* / 1 m)

Variants from €8.29*

€9.59*

-20 %

#FA20749

ROTHENBERGER ROTHENBERGER pipe bending pliers Minibend for pipe diameters 6/8/10mm

Robust hand pipe bender for dimensionally accurate two-handed bending of pipe diameters of 6mm, 8mm and 10mm up to 180. Suitable for cold bending of steel, aluminum, copper and ring tubes. The practical scale with graduations from 0 - 180 degrees enables precise work.The perfect helper in the workshop and in mobile use for refrigeration and air conditioning technology, oil supply, hydraulic and compressed air technology.Bending radius: 0 - 180 degreesFor pipe : 6, 8, 10mmTotal length: 270mmWeight: 465g

€89.95* €112.00* (19.69% saved)

#18704

Seamless hydraulic pipe, galvanized

Ø outside (mm): 10 x 1,5

According to DIN 2391/C NBK, galvanized on the outside, suitable for all pressure levels. Price per meter. Shipping up to a maximum length of 2.0 meters. ~

Variants from €6.99*

€7.79*

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Hy. hoses, pipes, fittings

scratch protection

Accesories

Hose marking

Hydraulic pipes

Hydraulic hoses

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.