Mower bar replacement parts |

#FA109831

Husqvarna Pruner 120i TK4-PH Set with battery and charger

THE lightweight, battery-powered Husqvarna combi set - hedge trimmer and pole pruner in one set!The Husqvarna basic cordless tool 120iTK4 with telescopic shaft, charger and battery AND - HK4 hedge trimmer attachment with 30 cm cutting length - PK4 pole pruner attachment with 25 cm cutting lengthVery good cutting performance, enormous working height up to over 4 metres, without annoying cable and without direct emissions. Low vibration. The telescopic shaft offers a reach of up to 4 metres and can be quickly and easily adjusted to work at different heights.Easy transport thanks to the divisible shaft. Depending on the conditions, choose between normal or savE mode to achieve maximum power or maximum runtime. Either way, you will always get a perfect result.The machine switches off automatically after 60 seconds of inactivity. This not only extends the battery life, but also increases the safety of the machine. Husqvarna 120i TK4 - PH4 - PK4 including 1 x BLi 10 battery and 1 x QC 80 charger!Technical data:Sword length 25 cm / 30 cmMotor type:Electric motorSound pressure level:80.6 db(A)Sound power level:97 db(A)Electric motorBattery voltage:36 VBattery: BLi 10 includedCharger: QC 80 includedWeight:4.5 kg

€429.00*

#FA64845

ESM Abrasive sole

Suitable for ESM universal beams type 30 - 16.

€6.00*

#FA13626

adjusting screw

Suitable for Bucher M500, M550, Record

€9.79*

#FA53128

adjusting screw

Suitable for type RM58, 158, 110, 111, 111S, 112, 131.

€18.00*

#FA53142

adjusting screw

Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.

€11.00*

#FA123579

Adjusting screw M16x1.5 instead of Aebi, BCS and Reform 580.58662.0

Adjusting screw with thread M16x1.5 for cutter head with serrated holder for Aebi, BCS and Reform.

€5.70*

#FA57029

Schröckenfux Allen screw M8x16

550980E, 2 pieces per knife

€1.00*

#FA43607

Backup

€1.59*

#FA19380

ESM Ball joint on the left

Thread M14x1.5, pin 19 mm.

€179.00*

#FA15212

ESM Ball joint on the right

Thread M14x1.5, pin 19 mm.

€179.00*

#FA27451

Ball ring

Suitable for type 116, 316

€15.50*

#FA13756

Ball socket for 116, 316

Suitable for type 116, 316

€165.00*

#FA15906

ESM Bar blade right/left

Suitable for ESM universal beams type 30 - 16.

€12.20*

#FA49088

Base 70x36x12mm for knife holder instead of BCS, Reform B563.51402.2

Underlay for the knife holder to compensate for the height of the beam attachment. This is screwed into the two outer knife holders.

€11.50*

#FA16046

BCS double finger center cut suitable for 590.27624.5

Double finger middle cut suitable for Aebi, BCS and Reform

€17.90*

#FA16050

BCS knife holder new suitable for 523.02824.0

Blade holder for BCS finger mower Europe series 600 and 700. Suitable for Aebi, BCS and Reform.

€3.90*

#FA7739

Bearing housing N78 suitable for mortar

The bearing housing N78 has an outside diameter of 77mm. The inner diameter is 62mm so that the deep groove ball bearing 6206 (Faie No. 16741) can be mounted.

€45.00*

#FA117930

ESM Bearing shaft with right-hand thread M56x2mm, 300.0700

Bearing shaft with right-hand thread M56x2mm for the horizontal swing mower drive from Busatis and ESM. Suitable for double knife mowers with mechanical or hydraulic drive.

€315.00*

#FA116094

ESM Bidux serrated blade, instead of ESM 344.0981

Original ESM Carbodux blade, serrated version

€8.60*

#FA101992

ESM Blade bidux serrated with knob, instead of ESM 344.0991

Original ESM Carbodux blade with knob, serrated design

€11.59*

#FA4736

ESM Blade for bidux double knife mower

Original mower blade suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.

From €3.49*

to the product

#FA7756

ESM Blade for Busati's double knife mower

Original ESM blade suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260.Made in Germany.

From €2.84*

to the product

#FA53052

ESM Blade guide plate right ESM 332.1320 suitable for double blade mowers

Blade guide plate on the right suitable for Busatis and Busatis bidux double blade mowers for guiding the upper and lower blades in the area of the outer shoe

€11.70*

#FA49506

ESM Blade holder for screwing for bar back thickness 15 mm, instead of ESM 272.0470

Blade holder for lower knife guide arm for screwing. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM 1124, BM 1260. The through holes on the back of the bar should have a diameter of at least 10.1mm. If the knife holders to be replaced are riveted, then the hole diameter on the back of the beam is usually 9.20 to 9.50 mm.Please check the diameter of the holes on the back of the beam before ordering the version withscrews!

€61.90*

Seite 1 von 13

Mower bar replacement parts

Suitable for bcs

Suitable for Rasspe

Suitale for Mörtl

Suitable for aebi

Suitable for bertolini

Suitable for brd-busatis

Suitable for agria

Suitable for rapid

Suitable for Brielmaier

Suitable for Reform

Suitable for Moty

Matching vogel & noot

Suitable for esm

Suitable for rasant-nußmüller

Suitable for steyr

Suitable for gebusa busatis

Suitable for Bucher

€10 voucher.