Suitable for bcs

Adjusting screw with thread M16x1.5 for cutter head with serrated holder for Aebi, BCS and Reform.

Underlay for the knife holder to compensate for the height of the beam attachment. This is screwed into the two outer knife holders.

Double finger middle cut suitable for Aebi, BCS and Reform

Blade holder for BCS finger mower Europe series 600 and 700. Suitable for Aebi, BCS and Reform.

Cone nut with thread M16x1.5 for measuring head with serrated holder for Aebi, BCS and Reform.

Conical screw M8x1x19 with wrench size 14mm. Suitable for Aebi, BCS and Reform.

Tapered screw M8x1x21 with wrench size 13mm. Suitable for Aebi, BCS and Reform.

Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian bar, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European bar.We would like to point out that Aebi and Reform have different cutter bars for this cutter head . This means that the length of the fastening screws is not sufficient. You can order a longer taper screw and knife head screw as an accessory (see also below) under the following FAIE numbers: ~ ~Taper screw M8x1x21mm, FAIE number 107996Knife head screw M8x1x20mm, FAIE -Number 107995

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

Knife head loosely suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.

Double finger plate for BCS mowers in the 94 EUROPA series. These mowers can be found on Aebi, BCS mowers in the 600 and 700 series, as well as on Reform motor mowers in the 600 and 700 series.

Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.

Knife holder for BCS Reform series 600 and 700

Mower blade suitable for BCS laser bars on Aebi, BCS and Reform motorised mowers. The blade has a length of 90 mm.

Cutter head screw M8x35 suitable for Aebi, BCS and Reform.

Single finger plate for BCS mowers in the 94 EUROPA series. These mowers can be found on Aebi, BCS mowers in the 600 and 700 series, as well as on Reform motor mowers in the 600 and 700 series.