Suitable for aebi

Adjusting screw with thread M16x1.5 for cutter head with serrated holder for Aebi, BCS and Reform.

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Suitable for AEBI Type A33, A35, A41 center section.

Cone nut with thread M16x1.5 for measuring head with serrated holder for Aebi, BCS and Reform.

Cone spigot suitable for Aebi cutterhead with clamping claw and for the cutterhead for ESM municipal and universal beams. The spigot has an M10 internal thread and the cone has a diameter of 16 - 18 mm.

Conical screw M8x1x19 with wrench size 14mm. Suitable for Aebi, BCS and Reform.

Tapered screw M8x1x21 with wrench size 13mm. Suitable for Aebi, BCS and Reform.

Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian bar, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European bar.We would like to point out that Aebi and Reform have different cutter bars for this cutter head . This means that the length of the fastening screws is not sufficient. You can order a longer taper screw and knife head screw as an accessory (see also below) under the following FAIE numbers: ~ ~Taper screw M8x1x21mm, FAIE number 107996Knife head screw M8x1x20mm, FAIE -Number 107995

Cutter head screw M8x1x20, strength class 10.9. Suitable for Aebi, BCS and Reform.

Knife head loosely suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Replacement for single finger A33Suitable for AEBI Type A33, A35, A41 center cut and A71, A73, A81, AM9, AM20

Suitable for AEBI Type A33, A35, A41 center section.

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

serratedSuitable for AEBI Type A33, A35, A41 center cut and A71, A73, A81, AM9, AM20.

Finger screw M10x34mm with square head 20x11mm without nut

Shim plate for adjusting the distance between the knife holder and the friction plate. Suitable for Aebi, Agria, Bucher, ESM, Kppl, Nussmller Rasant and Rapid.

Cutter head complete with fastening screws. Suitable for Aebi BM5 and BM8 with Italian beam, BCS Series 600 - 700 and Series 94 Speciale SF and Reform Series 600 and 700 with European beam with serrated knife holder. The hole spacing of the fastening screws is 76mm from hole center to hole center. The guide roller holder has a width of 43mm.

Suitable for AEBI Type A71, A73, A81, AM9, AM20.