Suitable for agria

Carrier pin for Agria instead of 065311, 373.0050

Carrier pin suitable for Agria for attaching the cutter bar to the power tool.

Cleaning plate suitable for Aebi, Agria, ESM, K�ppl, Nu�m�ller-Rasant, Rapid, Rasspe

Cleat left

Cleat right

Cutter head complete including wear plates for sliding block 38x38mm, instead ESM 247.0480

Cutter head complete with wear plates for sliding block size 38x38mm and with centre bolt for centring the cutter head. The cutter head can be fastened with 4 screws. The hole spacing of the screws is 101.6mm and 152.4mm. The holes are designed for M8 screws.

Cylinder head rivet 5x16.5mm for Agria 075690

Double finger Agria

Agria: Suitable for 1700, 2300, 2400, 3300, 5400, 6000, BM3600.Bird &~ Noot: Suitable for Plus 1, 3, 4 middle cut.

Driver screw loose M18x1.5 for cutter head

Driver screw suitable for Aebi, Agria and Nussmller-Rasant motor mowers and cutter bar for mower blade drive with mushroom rivets on the swing arm

Fastening screw with spring to swath board

finger plate

Suitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

Finger screw/shoe screw M10x35 square head 20x11mm, without nut

Finger screw M10x34mm with square head 20x11mm without nut.Suitable for AEBI Type A33, A35, A41 middle cut.Suitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.Suitable for BUSATIS double knife mower BM321KW .Suitable for Vogel and Noot Plus 1, 3, 4 center cut

Friction plate 332.2830

Original ESM friction plate instead of Agria 07506 suitable for finger bars from Agria, ESM and Vogel &~ Noot.

Insert plate 0.2 mm instead of ESM 363.1030

0.2mm thick shim for adjusting the height of the knife holder on finger bars from Agria, ESM mowers and Vogel &~ Noot mowers.

Insert sheet 0.5 mm

Shim plate for adjusting the distance between the knife holder and the friction plate. Suitable for Aebi, Agria, Bucher, ESM, Kppl, Nussmller Rasant and Rapid.

Knife head complete

Mower blade back 135 cm

2 threaded holes LA=100 mm.Suitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

Mower blade back 137 cm

4 threaded holes M8 LA=178/100 mmSuitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

Mower blade back 145 cm, 19 blades

2 threaded holes M8 LA=152.4 mmSuitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

Mower blade back 160 cm, 21 blades

2 threaded holes M8 LA=152.4 mmSuitable for AGRIA 1700, 2300, 2400, 3300, 5400, 6000, BM3600.

Mushroom to the swing arm

Outsole on the left instead of Agria/ESM 075480, 341.0020

Sliding sole for ESM finger bars suitable for Agria and Vogel &~ Noot.

Outsole on the right instead of Agria/ESM 075580, 341.0110

Sliding sole for ESM finger bars suitable for Agria and Vogel &~ Noot.

Reinforcement strip suitable for Agria, 300x20x3mm

Reinforcement strip suitable for Agria middle cut finger bars with 4 threaded holes M8.

Swath plate left with fixing screw

​Swath plate left for motorised mower with outer shoe. The swath plate is supplied complete with the fastening material.Suitable for Agria, ESM, Köppl and Nussmüller Rasant finger bars.