Suitable for brd-busatis

#FA109831

Husqvarna Pruner 120i TK4-PH Set with battery and charger

THE lightweight, battery-powered Husqvarna combi set - hedge trimmer and pole pruner in one set!The Husqvarna basic cordless tool 120iTK4 with telescopic shaft, charger and battery AND - HK4 hedge trimmer attachment with 30 cm cutting length - PK4 pole pruner attachment with 25 cm cutting lengthVery good cutting performance, enormous working height up to over 4 metres, without annoying cable and without direct emissions. Low vibration. The telescopic shaft offers a reach of up to 4 metres and can be quickly and easily adjusted to work at different heights.Easy transport thanks to the divisible shaft. Depending on the conditions, choose between normal or savE mode to achieve maximum power or maximum runtime. Either way, you will always get a perfect result.The machine switches off automatically after 60 seconds of inactivity. This not only extends the battery life, but also increases the safety of the machine. Husqvarna 120i TK4 - PH4 - PK4 including 1 x BLi 10 battery and 1 x QC 80 charger!Technical data:Sword length 25 cm / 30 cmMotor type:Electric motorSound pressure level:80.6 db(A)Sound power level:97 db(A)Electric motorBattery voltage:36 VBattery: BLi 10 includedCharger: QC 80 includedWeight:4.5 kg

€429.00*

#FA19380

ESM Ball joint on the left

Thread M14x1.5, pin 19 mm.

€179.00*

#FA15212

ESM Ball joint on the right

Thread M14x1.5, pin 19 mm.

€179.00*

#FA117930

ESM Bearing shaft with right-hand thread M56x2mm, 300.0700

Bearing shaft with right-hand thread M56x2mm for the horizontal swing mower drive from Busatis and ESM. Suitable for double knife mowers with mechanical or hydraulic drive.

€315.00*

#FA116094

ESM Bidux serrated blade, instead of ESM 344.0981

Original ESM Carbodux blade, serrated version

€8.60*

#FA101992

ESM Blade bidux serrated with knob, instead of ESM 344.0991

Original ESM Carbodux blade with knob, serrated design

€11.59*

#FA4736

ESM Blade for bidux double knife mower

Original mower blade suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.

From €3.49*

to the product

#FA7756

ESM Blade for Busati's double knife mower

Original ESM blade suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260.Made in Germany.

From €2.84*

to the product

#FA53052

ESM Blade guide plate right ESM 332.1320 suitable for double blade mowers

Blade guide plate on the right suitable for Busatis and Busatis bidux double blade mowers for guiding the upper and lower blades in the area of the outer shoe

€11.70*

#FA49506

ESM Blade holder for screwing for bar back thickness 15 mm, instead of ESM 272.0470

Blade holder for lower knife guide arm for screwing. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM 1124, BM 1260. The through holes on the back of the bar should have a diameter of at least 10.1mm. If the knife holders to be replaced are riveted, then the hole diameter on the back of the beam is usually 9.20 to 9.50 mm.Please check the diameter of the holes on the back of the beam before ordering the version withscrews!

€61.90*

#FA4737

ESM Blade with knob for bidux double knife mower

Original blade with knob suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.

From €5.86*

to the product

#FA7757

ESM Blade with knob for Busati's double knife mower

Original ESM blade with knob suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260. Made in Germany.

From €5.47*

to the product

#FA2594

ESM Bottom cutter head, L=400 mm, pin � 18 mm

Suitable for BUSATIS mower Bidux 1205

€74.00*

#FA53049

ESM Bottom cutter head, pin � 16 mm

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

€127.00*

#FA53031

ESM Bottom cutter head, pin � 16 mm, suitable for Busatis

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

€65.00*

#FA113790

ESM Bottom knife ball joint bidux left

Connection joint between rocker arm and bedknife head. Thread M14x1.5, bore 18mm, left

€215.00*

#FA2561

ESM Bottom knife ball joint bidux right

Connection joint between rocker arm and bedknife head. Thread M14x1.5, bore 18mm, right

€122.00*

#FA3965

ESM Bottom knife ball joint on the right

Thread M14x1.5, pin hole 16 mm.

€122.00*

#FA6855

ESM Bracket 3840.270.01

€2.65*

NEU

#FA112653

ESM Busatis clearing disc complete with bearings

Clearance disc complete with bearing suitable for all Busatis front mowers. The hole for the mount has a diameter of 25mm. There are 2 bearings 6005 RS installed.

€185.00*

#FA117928

ESM Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€235.00*

#FA53051

ESM Cutter head plate below

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

€12.20*

#FA53050

ESM Cutter head plate on top

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

€18.50*

#FA3533

ESM Double ball joint

€359.00*

Seite 1 von 3

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.