Now with a universally usable grinding attachment for standard angle grinders with a grinding wheel diameter of 125 mm. Function and easy handling determine the concept of the ESM service station. All ESM knife types can be precisely sharpened with a blade cutting angle of up to 40. The grinding attachment holder, which can be adjusted in all levels, enables adaptation to angle gears of angle grinders from a wide range of manufacturers.As an additional product benefit, the ESM service station offers the option of holding ESM cutter bars in order to be able to carry out maintenance work on them.The ESM Service station consists of two clamping devices, the mower blade grinding attachment for angle grinders with a grinding wheel diameter of 125 mm, and a guide rail. The components can be easily and quickly fixed on any standard workbench. For long-term use, screwed fastening of the clamping devices via their additional support plates to the table support is recommended.The grinding attachment is adjusted to the structural conditions of the available angle grinder after the handle of the angle grinder has been unscrewed. It is possible to adjust the height, width, depth and angle of the attachment.The mower blade is secured in the clamping device by two screws, the angle grinder with attachment is placed on the guide rail and the grinding wheel is attached to the blade cutting edge by moving it back and forth guided along.The angle adjustment in the hinge point of the grinding attachment ensures a repeatable, true-angle grinding of the blades and thus optimal blade sharpness.Scope of delivery: 2 clamping devices, 1 guide rail, 1 mower blade grinding attachment for Angle grinder with grinding wheel diameter 125 mm

14 blades

18 blades

20 blades

Needle bush for crank bearing housing suitable for Busatis/ESM double-blade mower.

Set with a cutting width of 1.9 m, comprising Upper blade DME1606 A – 25 blades = 5460.055.63 = 262.5990 and lower blade DME 1606B – 26 blades = 5470.055.61 = 265.5980.Suitable for AEBI TT33 with front mower, Busati BM1102 rear mower, Rasant Nußmüller KombiTrak, Reform Metrac 2002, 2004, 3000Original No. 221.601.920 and many more.Upper blade:Total length including blade head: 1940mmLength of blade back: 1850mmBlade head 5840.052.01, 345.0690 Blade head projection beyond blade back: 57 mm Blade head length: 235 mm Blade head pin diameter: 16 mm Blade head orientation when viewed in the direction of travel: leftTotal number of blades: 25, including 5 mushroom blades Position of the mushroom blades relative to the blade head 3rd, 8th, 13th, 18th and 23rd bladesBlade spacing (centre-to-centre): 76 mmOriginal ESM upper blade: 262.5990Lower blade:Total length including blade head: 2000 mmLength of blade back: 1965 mmBlade head 5840.053.01, 345.0700 Blade head projection beyond the blade back: 28 mm Blade head length: 360 mm Blade head pin diameter: 16 mm Blade head viewed in the direction of travel: leftTotal number of blades: 26, of which 4 are mushroom blades and 1 is an end blade Position of the mushroom blades relative to the cutter head 6th, 11th, 16th and 21st bladesBlade spacing (centre to centre): 76 mmOriginal ESM lower blade: 265.5980

Suitable for BUSATIS mower Bidux 1205

Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Outer shoe including cleat with short (52mm) nose. Suitable for Busatis double knife mower system bidux BM 1205, BM 1370.

Outer shoe including cleat with long (70mm) nose. Suitable for Busatis double knife mower BM 321KW, BM 1101, BM 1102, BM 1124, BM 1135, BM 1260.

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.

Sliding sole for ESM finger bars suitable for Agria and Vogel &~ Noot.

Sliding sole for ESM finger bars suitable for Agria and Vogel &~ Noot.

Plastic plain bearing for rocker arm on double knife horizontal swing mower drive. Suitable for Busatis, Busatis bidux and ESM double knife bars.

Raised countersunk screw for crank drive system Busatis and system bidux.

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.

Suitable for ESM universal beam C

Rocker arm for the bidux system drive, completely pre-assembled with ball joint and rocker bolt.

Original spare part from ESM. Rocker arm for ESM communal beams suitable for many device manufacturers.

Rocker arm for the bidux system drive, completely pre-assembled with ball joint and rocker bolt.

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.