Thread M14x1.5, pin hole 16 mm.

​​Bottom knife for the bidux ESM double-blade bar, compatible with Aebi, IBEX and Köppl, with a total of 29 blades. Four of these are blades with knob for attaching the knife guide arms. The spacing between the centres of the blades is 70 mm. The knive is supplied without the blade head, which is screwed onto the left-hand side when viewed in the direction of travel. The upper-knive-head is secured with 3 M8 fixing screws. The blades with knob are positioned at the 5th, 12th, 18th and 25th blades.

Clearance disc complete with bearing suitable for all Busatis front mowers. The hole for the mount has a diameter of 25mm. There are 2 bearings 6005 RS installed.

Carrier pin suitable for Agria for attaching the cutter bar to the power tool.

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

Contents: 40 pieces 5x12 mm, 40 pieces 5x17 mm, 40 pieces 5x20 mm, 20 pieces 6x20 mm, 20 pieces 6x25 mm

Cutter head complete with wear plates for sliding block size 38x38mm and with centre bolt for centring the cutter head. The cutter head can be fastened with 4 screws. The hole spacing of the screws is 101.6mm and 152.4mm. The holes are designed for M8 screws.

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.

For ESM universal folding beam suitable for Reform, BCS, Aebi, Tielbrger, Viking and many other brands.

98x74x3 mm, hole spacing 51 mm

Double blade 6-hole with 10 mm center bore. The rivet holes have a countersink on the underside.

Center hole oval, lowered at the bottom

Driver screw suitable for Aebi, Agria and Nussmller-Rasant motor mowers and cutter bar for mower blade drive with mushroom rivets on the swing arm

Original ESM end blade for Busatis double knife mowers. Made in Germany. Original ESM Carbodux blade.

Mower blade, 23 blades