Transmission

​The 96071 series reduction gearbox is a compact gearbox designed for use with hydraulic motors. The gearbox has a reduction ratio of 3:1, which means that the speed at the output of the gearbox is 3 times slower than the speed at the input. The direction of rotation of the output shaft is the reverse of the direction of rotation of the input shaft (viewed at the visible shaft end). The gearbox is equipped with a robust aluminium housing. The input side has a bore with a diameter of 25 mm and a keyway of 8 mm. The connecting flange is suitable for oil motors with an SAE-A flange.The output side is a hollow shaft with a diameter of 35 mm and a keyway of 10 mm. Four M12 holes with a bolt circle diameter of 110 mm are arranged on the output side for fastening the gearbox. Please fill up and check the oil level before commissioning the gearbox. The maximum power transmission is 20 kW.Compact and robust High-quality workmanship High torque Long service life Universal application possibilities

Connection input (y): 1-3/8x6 (inner profile)~Connection output (x): 1-3/8x6~ Reversal of direction of rotation

Technical data: 22 kW, 540 rpm, 395 Nm Input connection: 1-3/8x6 (inner profile) Output connection: 1-3/8x6 1. Output shaft: direction of rotation remains the same 2nd output shaft: reversal of direction of rotationIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Reversing or reversing gear to change the direction of rotation with through drive.Input Y:540 rpmPower: 51.5 kWTorque: 910 Nm Connection 1 3/8x6Reversal of direction of rotationPossibility with through drive 1:1 (direction of rotation remains the same).In general, torque peaks up to 2 times the nominal torque do not lead to any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Consisting of aluminum ring for PTO shaft with screw and retaining bracket for sensor

Gearboxes with slip-on fasteners are an efficient, flexible and maintenance-friendly solution for driving hydraulic pumps. They enable optimum speed adjustment, resulting in improved performance and reliability of hydraulic systems in a wide range of applications. When selecting a suitable gearbox, the specific requirements of the application in terms of torque, speed and size should be taken into account.The connection for the PTO shaft is 1 3/8 x 6 teeth. The input speed can be up to 1000 rpm

Input speed 540 or 1000 rpm.

Transmission gear for hydraulic pumps of assembly 2 or 3 with quick-release fastener. The transmission has a through drive on a PTO shaft stub 1 3/8 x 6. The gear ratio is 1: 3.8. When using a hydraulic pump from assembly 2, a centering ring (Faie No. 112326) must be used. This ring reduces the centering seat of BG 3 from 50.8mm to the diameter of the centering seat of BG 2 of 36.5mm.

Input speed 540 or 1000 rpm.

Input speed 540 or 1000 rpm.