Spur gear drive

Our offer

29 %

#FA41791

Blade holder suitable for RASSPE

Blade holder suitable for Rasspe drum mowers

€4.69* €6.59* (28.83% saved)

#4169

Schröckenfux Blade N336, 80 x 76 x 2 mm

Version: gezahnt

Blade N336 serrated, 80x76x2mm - wide Mrtl blade. This type of blade was installed on the medium-Rasant, high-Rasant and high-Florett mowers.

€1.35*

#21294

Schneider Compact multi-grab shovel with EURO holder

Version: 6 Zinken | Volume: 0,46 | Weight (kg): 240 | Width (mm): 1400

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share

Length (mm): 270 | Tine material: 25 x 8

Tine material 25x8.

€8.79*

10 %

#FA109546

Coupling plate for Schäffer farm loader, tubular frame mount

Weld-on coupling plate for attaching tools and equipment to the Schäffer farm loader with connection for shaped tube.

€169.00* €187.00* (9.63% saved)

25 %

#FA54554

Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.00* €3.99* (24.81% saved)

9 %

#FA72434

Schneider EURO three-point adapter Cat.2

Clearance adapter from EURO attachment on the front loader to implements with three-point attachment cat. 2. Very robust and lightweight design.The Euro adapter from Schneider makes it possible to use existing implements and implements with category 2 three-point linkage on front loaders with Euro linkage. The short upper top link, which can be used in two slots, and the lower lockable three-point hitches ensure safe handling of the tools and implements with the adapter.Load capacity 1000 kgWeight 50 kg

€319.00* €349.00* (8.6% saved)

20 %

#FA51978

Feed mixer knife short 540x8mm for Mayer Siloking

Thickness 8mm

€39.90* €49.90* (20.04% saved)

25 %

#FA19414

Friction strip 996 mm, 1 pair

€49.00* €65.00* (24.62% saved)

22 %

#FA34389

Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

All Products

#FA125568

Bondioli & Pavesi Gearbox M10 1:3

For various types of application, especially in agriculture. Small dimensions and low weight. Easy maintenance. The gearboxes are supplied without oil filling. General technical data: Inlet connection: 1 3/8" Output connection: Ø 35 h6 Reversal of direction of rotation: yes In general, torque peaks up to 2 times the nominal torque do not cause damage to the individual gearbox components. However, complete integrity can only be guaranteed by a suitable safety device.

€898.00*

#FA110801

BERMA Gearbox RT160 8.4:1 1500Nm, bore ø40mm

In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump. In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.Delivery without oil motor!

€598.00*

NEU

#FA130726

BERMA Gearbox RT190 10,2:1 1900Nm, bore ø40mm

In agricultural technology, scraper floors are often driven with a hydraulic drive via an oil motor in conjunction with a scraper floor gear. These drives can be found in loading wagons, manure spreaders and also in chopping wagons. For this purpose, gearboxes with a high reduction ratio and a high transferable torque are used. The gearboxes are supplied with different diameters for the drive shaft. A hydraulic motor with a shaft diameter of 25 mm and an SAE-A flange is used on the input side. The design of the hydraulic motor depends on the required speed of the scraper floor shaft and the available liter output of the hydraulic pump.In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.Delivery without oil motor!

€798.00*

#FA31033

Bondioli & Pavesi Gearbox universal IMR1

With 5 different possible uses.1) Input X, output Y: Reduction 2:1 with reversal of direction of rotation 2) Input Reduction 2:1 with constant direction of rotation 3) Input Z (Y), output Y (Z): Ratio 1:1 with reversal of direction of rotation < strong>4) Input Y, output X: Ratio 1:2 with reversal of direction of rotation 5) Input Z, output Direction of rotation. Technical data: 14.7 kW, 540 rpm or 1000 rpm, Connections: 3x13/8x6 (inner profile). 1 piece of PTO shaft stub (as shown) included in delivery. A mounting console is attached to the gearbox. Filled with gear slime EPO-0.3 kg.In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€598.00*

#FA33245

Bondioli & Pavesi IMR 6 transmission gear

Gear ratio 1:2, same direction of rotation, weight: 26 kgInputx: 540 rpm, 51.5 kW, 928 Nm, connection 1 3/8"x6 stubsOutput y: 1080 rpm, 460 Nm, connection 1 3/8"x6 inner profileIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€954.00*

#32391

Bondioli & Pavesi M5 transmission gear

Speed (rpm): 1620 | Torque (Nm): 152 | Translation: 1 : 3

For various types of applications, especially in agriculture. Small dimensions and low weight. Easy maintenance. The gearboxes are delivered without oil filling. General technical data: ~Input connection: 1 3/8" ~Output connection: 30 h6 ~Reversal of direction of rotation: yes ~Height H: 294 mm ~Width B1: 110 mm ~Width B2: 215 mmIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

Variants from €579.00*

€579.00*

#FA69143

Bondioli & Pavesi Multifunctional gearbox IMR 6

Through various combination options by reconnecting the supplied PTO shaft stub, gear ratios of 1:1, 1:2 or 2:1 can be achieved while maintaining or changing the direction of rotation. This results in 6 different possible uses. The PTO shaft stub is fixed in the hollow shafts by circlips.44 kW at 540 rpm or 1000 rpm.PTO shaft connections: 3x 1 3/8 x 6Generally, torque peaks are up to 2 times higher of the nominal torque does not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€954.00*

#FA59691

Bondioli & Pavesi Reduction gear front PTO shaft M7 1.9:1

Particularly suitable for attachment to the front PTO shaft to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The transmission is mounted on the tractor side.Input Y:PTO shaft stub or internal toothing540/1000 rpm, 26.4/51.5 kW, 477/928 NmConnection 1 3/8x6, internal or external toothingPossibility with through drive 1:1 (direction of rotation constant).Output X:284/ 526 rpm, 482/895 NmConnection 1 3/8x6 external toothingReversal of direction of rotationIn general, torque peaks up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€939.00*

#FA35037

Bondioli & Pavesi Reduction gear M7 1.9:1

Especially suitable for the front PTO to change the direction of rotation and reduce the speed from 1000 rpm to 526 rpm. The gearbox is installed on the device side.Input Y:540/1000 rpm26.4/39.7 kW 477/386 NmConnection 1 3/8x6Output X:284/526 rpm895/725 NmConnection 1 3/8x6 inner profile Reversal of direction of rotationPossibility with through drive 1:1 (direction of rotation remains the same). In general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€875.00*

#35433

Reversing gear M10 1:1

Gearbox: M10 1:1

Connection input (y): 1-3/8x6 (inner profile)~Connection output (x): 1-3/8x6~ Reversal of direction of rotation

€998.00*

#FA30449

Bondioli & Pavesi Reversing gear M5, 1:1

Technical data: 22 kW, 540 rpm, 395 Nm Input connection: 1-3/8x6 (inner profile) Output connection: 1-3/8x6 1. Output shaft: direction of rotation remains the same 2nd output shaft: reversal of direction of rotationIn general, torque peaks of up to 2 times the nominal torque do not cause any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€598.00*

#FA38132

Bondioli & Pavesi Reversing gear M7 1:1

Reversing or reversing gear to change the direction of rotation with through drive.Input Y:540 rpmPower: 51.5 kWTorque: 910 Nm Connection 1 3/8x6Reversal of direction of rotationPossibility with through drive 1:1 (direction of rotation remains the same).In general, torque peaks up to 2 times the nominal torque do not lead to any damage to the individual gear components. However, complete integrity can only be guaranteed by a suitable safety device.

€875.00*

#34110

BERMA RT300 scraper floor gear 29.5:1 3000Nm

Ø shaft (mm): 40

Variants from €879.00*

€879.00*

#52783

BERMA Scraper floor gearbox RT150 12:1 1500Nm

recommended oil motor: 18397, 18399 | Ø shaft (mm): 35

Variants from €625.00*

€625.00*

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Spur gear drive

Spur gear m7

Scraper floor gearbox

Spare parts for gearboxes

Spur gear m10

Spur gear m5

Universal gearbox imr

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.