Skip to main content Skip to search Skip to main navigation
Go to homepage

einfach besser Landwirtschaften

Gearboxes for hydraulic pumps


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*
€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-25 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.00* €3.99* (24.81% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)
-33 %

All Products

#FA112326
Centering ring 66mm to 36.5mm BG3/BG2 Centering ring 66mm to 36.5mm BG3/BG2

Centering ring for hydraulic pumps of assembly 2 in order to be able to use them on the gearbox of assembly 3. The ring has an outer diameter of 66mm and an inner diameter (centering seat of the BG 2 hydraulic pump) of 36.5mm.

€2.99*
#129308
Transmission gear for hydraulic pumps with quick-release fastener Transmission gear for hydraulic pumps with quick-release fastener
Power max.: 25,7 kW Translation: 1 : 2

Gearboxes with slip-on fasteners are an efficient, flexible and maintenance-friendly solution for driving hydraulic pumps. They enable optimum speed adjustment, resulting in improved performance and reliability of hydraulic systems in a wide range of applications. When selecting a suitable gearbox, the specific requirements of the application in terms of torque, speed and size should be taken into account.The connection for the PTO shaft is 1 3/8 x 6 teeth. The input speed can be up to 1000 rpm

Variants from €239.00*
€239.00*
#37086
Transmission gear for hydraulic pumps with quick-release fastener Transmission gear for hydraulic pumps with quick-release fastener
Translation: 1 : 3,8

Input speed 540 or 1000 rpm.

Variants from €185.00*
€185.00*
#FA112324
Transmission gear for hydraulic pumps with quick-release fastener and through drive 1 3/8 x 6 Transmission gear for hydraulic pumps with quick-release fastener and through drive 1 3/8 x 6

Transmission gear for hydraulic pumps of assembly 2 or 3 with quick-release fastener. The transmission has a through drive on a PTO shaft stub 1 3/8 x 6. The gear ratio is 1: 3.8. When using a hydraulic pump from assembly 2, a centering ring (Faie No. 112326) must be used. This ring reduces the centering seat of BG 3 from 50.8mm to the diameter of the centering seat of BG 2 of 36.5mm.

€319.00*
#26860
Transmission gearbox for hydraulic pumps with PTO shaft stub Transmission gearbox for hydraulic pumps with PTO shaft stub
Translation: 1 : 3

Input speed 540 or 1000 rpm.

Variants from €159.00*
€159.00*
#26863
Transmission gearbox for hydraulic pumps with PTO shaft stub Transmission gearbox for hydraulic pumps with PTO shaft stub
Power max.: 25,7 kW Translation: 1 : 3

Input speed 540 or 1000 rpm.

Variants from €209.00*
€209.00*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.