Mower blades

18 blades, 10 pieces DIN80. 8 guide blades GB543.

18 blades, 10 pieces DIN80. 8 guide blades GB543.

17 blades, B590.43553.2

15 blades, B590.43544.0

Total number of blades 16 pieces, 11 blades DIN 80, 5 blades 60-02-09, 4 cleaning plates 50-03-10

17 DIN80 serrated blades, 4 cleaning plates, 1 reinforcement strip, H150.550.070

​The mowing blade for the Bucher T61 free-cut bar with double-sided free cut has 33 blades. Five blades on the left and five on the right are riveted with countersunk rivet heads so that the pointed blades of the counter blade lie flat against the mowing blades. Six cleaning plates are riveted to the blade with the blades. The cleaning plates are attached to the 6th, 10th, 14th, 20th, 24th and 28th blades. There are two M8 threaded holes in the back of the blade with a hole spacing of 152 mm. Between the 3rd and 4th cleaning plates there is a reinforcement strip on which the cutter head is mounted. The cutter head is screwed to the mower blade using the two M8 threaded holes.

Upper knife, 26 blades, including 5 mushroom blades 100345

Bottom knife, 26 blades, including 4 mushroom blades 100342

Bottom knife, 24 blades, including 4 mushroom blades

Upper knife, 24 blades, including 5 mushroom blades

Upper knife, 26 blades

Bottom knife, 26 blades

2 threaded holes M8, hole spacing 152 mm, 21 blades DIN75, 2 cleaning plates 259.0700

27 blades (22 blades N36/5 +5 guide blades N36/5R)

29 blades (24 blades N36/5 +5 guide blades N36/5R)

32 blades (26 blades N36/5 +6 guide blades N36/5R)

Mowing blade suitable for Moty Pony 120cm with 16 blades. Of these, 4 guide blades GB543. With 2 holes for M8 nose screws. Hole spacing 101mm.

Mowing blades suitable for Moty Pony and Vogel & Noot, 120 cm in length, with 23 blades, 4 of which with knob for mounting the blade guide arms. The blade head is secured to the mower using 2 M8 bolts spaced 101 mm apart. The blades with knobs are positioned at the 2nd, 9th, 15th and 22nd positions.

Mower blades suitable for Aebi mowing booms with belt-driven mowing and an additional cutting unit on the left-hand side when viewed in the direction of travel. The mower blade has 25 DIN 75 blades with 7 AM8731/2 cleaning plates. The cleaning plates are riveted onto the 1st, 2nd, 5th, 8th, 11th, 15th and 18th blades. On the left-hand side, the rivets on 5 blades have been ground down to accommodate the counter-blade of the additional cutting unit. The cutter head is clamped onto the drive plate AM8880/1.Austrian quality product

Upper knife, 22 blades

Bottom knife, 22 blades

1.9m, consisting of upper knife DME1606 A = 5460.055.63 = 262.5990 and lower knife DME 1606B = 5470.055.61 = 265.5980. Suitable for AEBI TT33 with front mower, Busatis rear mower BM1102, Rasant Numller KombiTrak, Reform Metrac 2002, 2004, 3000 Original No. 221.601.920 and many more.

Serrated finger plate suitable for Rapid double finger 22160.