Suitable for aebi

Lower blade, 26 blades, DME1606BOverall length including blade head: 2000 mmLength of blade back: 1965 mmBlade head 5840.053.01, 345.0700 Projection of blade head beyond blade back: 28 mm Blade head length: 360 mm Blade head pin diameter: 16 mm Blade head orientation when viewed in the direction of travel: leftTotal number of blades: 26, including 4 mushroom blades and 1 end blade Position of the mushroom blades relative to the blade head 6th, 11th, 16th and 21st bladesBlade spacing (centre to centre): 76 mmOriginal ESM lower blade: 265.5980

Normal cut 25 blades DIN 75, 7 cleaning plates AM8731/2, 1 cleaning plate AM23328/2

Mower blade with 23 blades suitable for ESM municipal cutter bars. The cutter head is attached to the blade with 2 M8x18 bolts at a distance of 101.6 mm. There are 4 pivot supports on the mower blade to hold the rocker arms. The pivot supports are positioned between the 2nd and 3rd, 8th and 9th, 15th and 16th, and 21st and 22nd blades.

19 blades DIN 75, 4 cleaning plates AM23328/2 on 7th/8th. Blade, 5 outer blades on the right and left with sunk rivets at the top, driver plate 46092/1, 2 threaded holes M8, LA = 101 mm

19 blades DIN 75, 6 cleaning plates AM23328/2 on 2nd, 5th, 8th, 12th, 15th and 18th blade, driver plate 46092/1, 2 threaded holes M8, LA=101 mm

Mower blade suitable for Aebi cutter bars with additional cutting unit on the left and right side. The cutter bar has 21 DIN 75 blades with 4 cleaning plates AM8731/2. The cleaning plates are riveted onto the 8th, 9th, 13th and 14th blade. The rivets for the counter-blade of the additional cutting unit are ground on the left and right of 5 blades each. The cutter head is clamped onto the AM8880/1 drive plate. Austrian quality product

23 blades DIN75, 2 cleaning plates AM8731/2

25 blades DIN 75, 6 cleaning plates AM8731/2

33 blades DIN 75, 6 cleaning plates AM8731/2

25 blades DIN 75, 8 cleaning plates AM8731/2, 2 cleaning plates AM23328/2

19 blades DIN 75, 6 cleaning plates AM8731/2, 2 cleaning plates AM23328/2

21 blades DIN 75, 8 cleaning plates AM8731/2, 2 cleaning plates AM23328/2

19 blades DIN 80, 4 cleaning plates 1250

21 blades DIN 80, 6 cleaning plates 1250

21 blades DIN 75, 6 cleaning plates AM8731/2

19 blades DIN 75, 4 cleaning plates AM8731/2

Bottom knife, 24 bladesOverall length including cutter head: 2025 mmLength of cutter back:         1995 mmCutter head 5840.055.01, 345.0770  Cutter head projection beyond cutter back: 26 mm  Cutter head length: 400 mm  Blade head spigot diameter: 18 mm  Blade head viewed in the direction of travel: leftTotal number of blades: 24, of which 4 are mushroom blades  Position of the mushroom blades relative to the blade head    6th, 11th, 16th and 20th bladesBlade spacing (centre to centre): 84 mmESM No. 265.6130Busatis No. 5471.500.65

Upper blade, 27 bladesOverall length including blade head: 1975 mmLength of blade back: 1884 mmBlade head 5840.040.01, 345.0550 Blade head projection beyond blade back: 90 mm Blade head length: 400 mm Blade head pin diameter: 18 mm Blade head viewed in the direction of travel: leftTotal number of blades: 27, including 5 mushroom blades Position of the mushroom blades relative to the blade head 3rd, 9th, 15th, 21st and 25th bladesBlade spacing (centre to centre): 70 mmESM No. 262.6130Busatis Nr. 5461.500.65, 5460.500.65 

Mower blade ESM 137cm 27 blades for universal bar C. 2 threaded holes M8 with hole spacing 101.6mm and 6 guide strips over 2. &~ 3rd blade, 6th &~ 7th Blade, 10th &~ 11th Blade, 17th &~ 18th Blade, 21st &~ 22nd Blade and 25th &~ 26. Blade. Original ESM mower blade suitable for Aebi, Agria, Bucher, Gutbrod, Holder, Nussmller Rasant, Rapid, Reform, Vogel &~ Noot and many others.

Mower blades suitable for Aebi mowing booms with belt-driven mowing and an additional cutting unit on the left-hand side when viewed in the direction of travel. The mower blade has 25 DIN 75 blades with 7 AM8731/2 cleaning plates. The cleaning plates are riveted onto the 1st, 2nd, 5th, 8th, 11th, 15th and 18th blades. On the left-hand side, the rivets on 5 blades have been ground down to accommodate the counter-blade of the additional cutting unit. The cutter head is clamped onto the drive plate AM8880/1.Austrian quality product

Upper blade, 25 blades, DME1606AOverall length including blade head: 1940 mmLength of blade back: 1850 mmBlade head 5840.052.01, 345.0690 Projection of blade head beyond blade back: 57 mm Blade head length: 235 mm Blade head pin diameter: 16 mm Blade head orientation when viewed in the direction of travel: leftTotal number of blades: 25, including 5 mushroom blades Position of mushroom blades relative to the blade head 3rd, 8th, 13th, 18th and 23rd bladesBlade spacing (centre to centre): 76 mmOriginal ESM lower blade: 262.5990