Suitable for brd-busatis
Pruner 120i TK4-PH Set with battery and charger
THE lightweight, battery-powered Husqvarna combi set - hedge trimmer and pole pruner in one set!The Husqvarna basic cordless tool 120iTK4 with telescopic shaft, charger and battery AND - HK4 hedge trimmer attachment with 30 cm cutting length - PK4 pole pruner attachment with 25 cm cutting lengthVery good cutting performance, enormous working height up to over 4 metres, without annoying cable and without direct emissions. Low vibration. The telescopic shaft offers a reach of up to 4 metres and can be quickly and easily adjusted to work at different heights.Easy transport thanks to the divisible shaft. Depending on the conditions, choose between normal or savE mode to achieve maximum power or maximum runtime. Either way, you will always get a perfect result.The machine switches off automatically after 60 seconds of inactivity. This not only extends the battery life, but also increases the safety of the machine. Husqvarna 120i TK4 - PH4 - PK4 including 1 x BLi 10 battery and 1 x QC 80 charger!Technical data:Sword length 25 cm / 30 cmMotor type:Electric motorSound pressure level:80.6 db(A)Sound power level:97 db(A)Electric motorBattery voltage:36 VBattery: BLi 10 includedCharger: QC 80 includedWeight:4.5 kg
Ball joint on the left
Thread M14x1.5, pin 19 mm.
Ball joint on the right
Thread M14x1.5, pin 19 mm.
Bearing shaft with right-hand thread M56x2mm, 300.0700
Bearing shaft with right-hand thread M56x2mm for the horizontal swing mower drive from Busatis and ESM. Suitable for double knife mowers with mechanical or hydraulic drive.
Bidux serrated blade, instead of ESM 344.0981
Original ESM Carbodux blade, serrated version
Blade bidux serrated with knob, instead of ESM 344.0991
Original ESM Carbodux blade with knob, serrated design
Blade for bidux double knife mower
Original mower blade suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.
Blade for Busati's double knife mower
Original ESM blade suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260.Made in Germany.
Blade guide plate right ESM 332.1320 suitable for double blade mowers
Blade guide plate on the right suitable for Busatis and Busatis bidux double blade mowers for guiding the upper and lower blades in the area of the outer shoe
Blade holder for screwing for bar back thickness 15 mm, instead of ESM 272.0470
Blade holder for lower knife guide arm for screwing. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM 1124, BM 1260. The through holes on the back of the bar should have a diameter of at least 10.1mm. If the knife holders to be replaced are riveted, then the hole diameter on the back of the beam is usually 9.20 to 9.50 mm.Please check the diameter of the holes on the back of the beam before ordering the version withscrews!
Blade with knob for bidux double knife mower
Original blade with knob suitable for Busatis and ESM bidux double blade mowers.Made in Germany.Original ESM Carbodux blade.
Blade with knob for Busati's double knife mower
Original ESM blade with knob suitable for Busatis double knife mowers BM321, BM1102, BM1124, BM1260. Made in Germany.
Bottom cutter head, L=400 mm, pin � 18 mm
Suitable for BUSATIS mower Bidux 1205
Bottom cutter head, pin � 16 mm
Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.
Bottom cutter head, pin � 16 mm, suitable for Busatis
Suitable for BUSATIS mower BM 1102, BM 1124, BM 1135 and BM 1260. Original ESM spare part.
Bottom knife ball joint bidux left
Connection joint between rocker arm and bedknife head. Thread M14x1.5, bore 18mm, left
Bottom knife ball joint bidux right
Connection joint between rocker arm and bedknife head. Thread M14x1.5, bore 18mm, right
Bottom knife ball joint on the right
Thread M14x1.5, pin hole 16 mm.
Busatis clearing disc complete with bearings
Clearance disc complete with bearing suitable for all Busatis front mowers. The hole for the mount has a diameter of 25mm. There are 2 bearings 6005 RS installed.
Complete rear crank bearing housing, 281.0090
Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.
Cutter head plate below
Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.
Cutter head plate on top
Knife holder for lower knife guide arm for riveting. Suitable for Busatis double knife mower BM 321KW, BM 1102, BM1124, BM1260.
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
