Mower spare parts
THE lightweight, battery-powered Husqvarna combi set - hedge trimmer and pole pruner in one set!The Husqvarna basic cordless tool 120iTK4 with telescopic shaft, charger and battery AND - HK4 hedge trimmer attachment with 30 cm cutting length - PK4 pole pruner attachment with 25 cm cutting lengthVery good cutting performance, enormous working height up to over 4 metres, without annoying cable and without direct emissions. Low vibration. The telescopic shaft offers a reach of up to 4 metres and can be quickly and easily adjusted to work at different heights.Easy transport thanks to the divisible shaft. Depending on the conditions, choose between normal or savE mode to achieve maximum power or maximum runtime. Either way, you will always get a perfect result.The machine switches off automatically after 60 seconds of inactivity. This not only extends the battery life, but also increases the safety of the machine. Husqvarna 120i TK4 - PH4 - PK4 including 1 x BLi 10 battery and 1 x QC 80 charger!Technical data:Sword length 25 cm / 30 cmMotor type:Electric motorSound pressure level:80.6 db(A)Sound power level:97 db(A)Electric motorBattery voltage:36 VBattery: BLi 10 includedCharger: QC 80 includedWeight:4.5 kg
Suitable for type 110, 111, 111S, 112, 112K, 115, 131 from 1976.
Adjusting screw with thread M16x1.5 for cutter head with serrated holder for Aebi, BCS and Reform.
Bar blade with a smooth counter edge suitable for ESM leaf trimmers and Schanzlin vine trimmers. The blade has a length of 110 mm, a width of 70 mm and the hole spacing of the rivet holes is 51 mm. The blade is fastened to the back of the bar with 6x20 mm countersunk rivets.
Underlay for the knife holder to compensate for the height of the beam attachment. This is screwed into the two outer knife holders.
4-hole mower blade, serrated version, suitable for BCS cutter bars and Reform motor mowers. The rivet holes are countersunk at the bottom with diameter 5,5 mm. The two central holes have a diameter of 10 mm.
Double finger middle cut suitable for Aebi, BCS and Reform
Blade holder for BCS finger mower Europe series 600 and 700. Suitable for Aebi, BCS and Reform.
The bearing housing N78 has an outside diameter of 77mm. The inner diameter is 62mm so that the deep groove ball bearing 6206 (Faie No. 16741) can be mounted.
Bearing shaft with right-hand thread M56x2mm for the horizontal swing mower drive from Busatis and ESM. Suitable for double knife mowers with mechanical or hydraulic drive.
Original ESM Carbodux blade, serrated version
Upper knife, 27 blades, 6 of which are mushroom blades
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
