Skip to main content Skip to search Skip to main navigation

Accessories for oil coolers


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*
Discount -24 %
#FA117928
Complete rear crank bearing housing, 281.0090 Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€179.00* €235.00* (23.83% saved)

Average rating of 5 out of 5 stars

#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
Discount -13 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)
Discount -40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
Discount -5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
Discount -10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
Discount -31 %
#47888
Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)
Discount -38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

All Products

#FA77647
asa Connection cable with plug, 2-pin Connection cable with plug, 2-pin

Cross section 2.5 mm, length 3.2 m

€25.50*

Content: 3.2 m (€7.97 / 1 m)

#FA104954
asa Connection set for asa TT standard cooler with asa rail system Connection set for asa TT standard cooler with asa rail system

Consisting of 2 pieces of connection parts with internal thread and 1 piece of blind cap.2 pieces of straight connections

€115.00*
#FA104955
asa Connection set for asa TT standard cooler with asa rail system Connection set for asa TT standard cooler with asa rail system

Consisting of 2 pieces of connection parts with internal thread and 1 piece of blind cap.1 piece straight and 1 piece 90 connection

€115.00*
#70618
asa Connection set for asa TT standard cooler with asa rail system Connection set for asa TT standard cooler with asa rail system
Thread: 1 Zoll

Consisting of 2 connecting parts with internal thread and 1 blind cap.2 pieces 90

€115.00*

Average rating of 4.83 out of 5 stars

#61125
asa Fan control for oil cooler Fan control for oil cooler
Amperage (A): 21 Performance: 310 W Voltage (V): 12

Soft start and temperature-dependent speed control of the fan. The maximum starting current is approx. 10% above the rated fan current. The fan speed is varied depending on the oil temperature using a temperature sensor (accessory). Overload and reverse polarity protection on voltage input. Time-delayed fan activation for self-protection. Control range with temperature sensor 45-55C, switching point with temperature switch 50C. Includes adapter cable for temperature switch (61128, 77617) or sensor (61127, 77616) with plug.

€159.00*
#FA61127
asa Temperature sensor Temperature sensor

Protection class IP67, thread G1/2", oil temperature range -20 to +100C. It is not possible to use the temperature sensor without fan control.

€56.00*
#FA77616
asa Temperature sensor IP69K Temperature sensor IP69K

44 - 55C, G 1/2"~ without cable.

€56.00*
#FA61128
asa Temperature switch Temperature switch

Switching temperature 50C, +/-5C, thread G1/2"

€56.00*
#FA77617
asa Temperature switch IP69K Temperature switch IP69K

Switching temperature 50C, +/- 5C, thread G 1/2"~ without cable.

€67.00*
#61129
asa Vibration damper Vibration damper
Height (mm): 30 Length (mm): 40 Thread inside: M8x10 mm Width (mm): 40 max. pressure load (N): 800

Especially for oil coolers, spring material natural rubber.

€12.00*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.