Oil cooler

Our offer

-29 %

#FA41791

Blade holder suitable for RASSPE

Blade holder suitable for Rasspe drum mowers

€4.69* €6.59* (28.83% saved)

#21294

Schneider Compact multi-grab shovel with EURO holder

Version: 6 Zinken | Volume: 0,46 | Weight (kg): 240 | Width (mm): 1400

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share

Length (mm): 270 | Tine material: 25 x 8

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

ESM Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-22 %

#FA34389

Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet

Color: rot | Type: 3070-04VP

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

Schröckenfux M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

-42 %

#FA116776

Metal wheel 2.0 'Basic', 2 pieces (1 pair), used demonstration wheels

Metal wheel 2.0 Basic suitable for many motor mowers up to a weight of 150kg. The metal wheel has a diameter of 420mm (corresponds to rubber tires 4.00 x 8), a width of 190mm and the centering hole has a diameter of 60.5mm. The fastening hub is made with 2 hole circles 4x100mm. A hole circle with the hole diameter for M12 collar screws and a hole circle for fastening with cone screws with a hole diameter of 15mm. The cone rings are welded into the hub.The delivery consists of a pair of metal wheels!The powder-coated metal wheel has a hardened tread on the outer contour and is therefore very resistant to abrasion. Thanks to the nested and welded construction, the wheel is very stable. How it works!Due to the offset outer contour or the overlap of the wheel lugs, a closed radius is created. This creates a closed radius You get perfect concentricity on hard surfaces such as a road without vibrations or shock loads on the driver and drive axles.The design of the wheels ensures a gentle crop flow of the forage from the knife bar right behind the wheels. Due to the geometry of the wheels, there is no wrapping the axles with food. The metal wheels 2.0 are designed in such a way that they clean themselves while driving. When mowing on soft ground, the wheel cleats engage in the ground. By immersing the driving lugs into the ground, the inner radius and the connecting struts are now the new running surface of the wheels. The controlled immersion of the driving lugs creates a uniform linear drive in which there is hardly any pulling to one side - regardless of whether it is on a slope or with uneven meadow vegetation.Another positive effect is the ground footprint that the driving lugs leave by immersing it in the ground. This footprint promotes water absorption on steep slopes. The metal wheel 2.0 Basic is suitable for motor mowers weighing up to 150kg. For heavier mowers, a wider version is recommended. In this case, please contact us or fill out the inquiry form available for download with the required technical data and send it to us. You will then receive a tailor-made offer for the right pair of metal wheels for your motor mower.Scope of delivery: 2 pieces of metal wheels

€690.00* €1,190.00* (42.02% saved)

All Products

#104957

asa ASA oil cooler LL Compact 230V

A (mm): 380 | Amperage (A): 0,55 | B (mm): 386 | C (mm): 350 | D (mm): 280 | E (mm): 200 | F (mm): 360 | Flow rate (l/min): 160 | G (Divers): 1" | K (mm): 360 | Model: LL08 AC compact | N (mm): 9 x 12 | P (mm): 200 | Performance: 0,12 kW | Speed (rpm): 2400 | Voltage (V): 230 | Volume (dbA): 67 | Weight (kg): 11

Aluminum oil air cooler in panel construction. Max. operating pressure 26 bar, protection class IP44.Application: hay cranes, stationary small units

Variants from €569.00*

€739.00*

#FA61117

asa ASA oil cooler LL04 12V 80L/min

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

€429.00*

#FA61118

asa ASA oil cooler LL04 24V 80 l/min

€429.00*

#FA61119

asa ASA oil cooler LL06 12V 105 l/min

€619.00*

#FA61120

asa ASA oil cooler LL06 24V 105 l/min

€619.00*

-31 %

#FA73758

asa ASA oil cooler TT07 230/400V, asa rail system

Aluminum oil air cooler in panel construction. Maximum flow 150 l/min, max. operating pressure 26 bar, protection class IP55.Delivered without connections and mounting base.Application: hay cranes, stationary small units

€619.00* €895.00* (30.84% saved)

#FA77647

asa Connection cable with plug, 2-pin

Cross section 2.5 mm, length 3.2 m

Content: 3.2 m (€7.97* / 1 m)

€25.50*

#FA104954

asa Connection set for asa TT standard cooler with asa rail system

Consisting of 2 pieces of connection parts with internal thread and 1 piece of blind cap.2 pieces of straight connections

€115.00*

#FA104955

asa Connection set for asa TT standard cooler with asa rail system

Consisting of 2 pieces of connection parts with internal thread and 1 piece of blind cap.1 piece straight and 1 piece 90 connection

€115.00*

#70618

asa Connection set for asa TT standard cooler with asa rail system

Thread: 1 Zoll

Consisting of 2 connecting parts with internal thread and 1 blind cap.2 pieces 90

Variants from €115.00*

€115.00*

#61125

asa Fan control for oil cooler

Amperage (A): 21 | Performance: 310 W | Voltage (V): 12

Soft start and temperature-dependent speed control of the fan. The maximum starting current is approx. 10% above the rated fan current. The fan speed is varied depending on the oil temperature using a temperature sensor (accessory). Overload and reverse polarity protection on voltage input. Time-delayed fan activation for self-protection. Control range with temperature sensor 45-55C, switching point with temperature switch 50C. Includes adapter cable for temperature switch (61128, 77617) or sensor (61127, 77616) with plug.

Variants from €159.00*

€159.00*

#62136

asa Fan motor complete suitable for asa oil/air cooler

Voltage (V): 24

Fan motor complete with housing, sealing profiles and fastening material suitable for asa oil cooler type 0176/0177/0256/0257, TT16, TT25By using a fan controller, the maximum charging and discharging current (ripple current) can be kept at the maximum value of 1%.Temperature range from -20 °C to 80 °CScope of delivery: 1 pc. Fan motor complete with housing, 4 pcs. screws with nuts and washers, 4 pcs. Spacers, 2 pcs. sealing profiles

Variants from €369.00*

€369.00*

#FA67990

asa Oil cooler ASA LL01 12V 20 l/min

€298.00*

#FA121154

asa Oil cooler ASA LL01 24V 20 l/min

Aluminium-Ölluftkühler in Plattenbauweise. Maximaler Betriebsdruck 26 bar, Schutzart IP68.Ölkühler werden bei Dauerbetrieb von hydraulischen Anlagen zur Abkühlung des Hydrauliköls eingesetzt. Vorwiegend werden Ölkühler jedoch auf solchen Anlagen montiert, die nachträglich mit weiteren hydraulischen Verbrauchern ausgerüstet wurden. Bei diesen Umbauarbeiten wird in vielen Fällen der Tankinhalt nicht vergrößert und dadurch erhöht sich der Umlauf und die Temperatur des Öles im Hydrauliksystem. Die optimale Betriebstemperatur einer Hydraulikanlage liegt zwischen 50-60°C. Erhöht sich die Temperatur zu stark, muss die überschüssige Wämemenge über einen ÖL/Luftkühler abgeführt werden.Um die Größe des Ölkühlers festlegen zu können, benötigen wir für die Berechnung einige Daten von Ihnen:- Zahnradpumpe oder Regelpumpe- Fördermenge der Pumpe in L/min- Tankinhalt in L (wenn bekannt)- Öldruck im Hydrauliksystem in bar- Umgebungstemperatur in °C- Öltemperatur der Hydraulikanlage in °C- Anschlussspannung in VWir berechnen gerne für Sie den benötigten Ölkühler und freuen uns auf Ihre Anfrage

€298.00*

#64437

asa Oil cooler asa rail system

A (mm): 465 | Amperage (A): 11,4 | B (mm): 460 | D (mm): 328 | Flow rate (l/min): 250 | J (mm): 153 | K (mm): 436 | L (mm): 190 | Model: TT 16 24V DC | N (mm): 6 | Performance: 0,30 kW | Voltage (V): 24 | Volume (dbA): 79 | Weight (kg): 14,9

Aluminum oil air cooler, max. operating pressure 26 bar, protection class IP 68. World's first flexible mounting and connection system for oil coolers. The hydraulic connection direction can be freely selected for each connection with 3 directions and the flow direction in the cooler can be changed. The oil flow direction can be described as both "~U-flow"~ as well as with "~diagonal flow"~ can be realized without special parts!Delivery without connections.

Variants from €392.00*

€765.00*

#19976

asa Oil cooler GT asa rail system completely assembled in the protective housing

Amperage (A): 7,7 | Model: TT06GT 12V

The GT series oil coolers are a fully assembled cooler package consisting of an oil air cooler, fan control with sensor, connections, vibration dampers and protective housing.The temperature is controlled via an electronic control in conjunction with a temperature sensor. Depending on the oil temperature, this fan control ensures the optimal fan speed and a smooth start-up of the fan. This reduces noise and increases the service life of the fan unit.The protective housing is a stable frame with a metal protective grille in front of the cooling element. The cooler is mounted on the special asa vibration dampers in the protective frame to prevent vibrations.Aluminum oil air cooler, max. operating pressure 26 bar, protection class IP68.

Variants from €895.00*

€895.00*

#77612

asa Oil cooler GT asa rail system completely assembled in the protective housing

A (mm): 490 | Amperage (A): 11,4 | B (mm): 590 | C (mm): 328 | D (mm): 515 | E (mm): 450 | F (mm): 210 | Flow rate (l/min): 250 | G (Divers): 11/4" | H (mm): 550 | J (mm): 143 | L (mm): 260 | Model: TT16GT 24V DC | Volume (dbA): 79

The GT series oil coolers are a fully assembled cooler package consisting of an oil air cooler, fan control with sensor, connections, vibration dampers and protective housing.The temperature is controlled via an electronic control in conjunction with a temperature sensor. Depending on the oil temperature, this fan control ensures the optimal fan speed and a smooth start-up of the fan. This reduces noise and increases the service life of the fan unit.The protective housing is a stable frame with a metal protective grille in front of the cooling element. The cooler is mounted on the special asa vibration dampers in the protective frame to prevent vibrations. Aluminium oil air cooler, max. operating pressure 26 bar, protection class IP68.

Variants from €1,049.00*

€1,598.00*

-26 %

#FA28777

asa Temperature control AC

The temperature control is a system with an adjustable thermostat, without oil contact. The switching temperature can be adjusted using the rotary knob on the housing. Furthermore, the control can be based on the rail system. the oil air cooler series asa rail can be mounted. This allows the control to be flexibly pushed to a desired position and then tightened. The final wiring to the fan must be carried out individually by the customer.Housing material: sheet steel, powder-coatedInstallation position: anyAdjustable switching range: -30/+120CSwitching capacity C.1-10/2, 5)A/250V, C2-6(2.5)A/250Vmax. Head temperature: +85Cmax. Sensor temperature: +150C

€95.00* €129.00* (26.36% saved)

#FA61127

asa Temperature sensor

Protection class IP67, thread G1/2", oil temperature range -20 to +100C. It is not possible to use the temperature sensor without fan control.

€56.00*

#FA77616

asa Temperature sensor IP69K

44 - 55C, G 1/2"~ without cable.

€56.00*

#FA61128

asa Temperature switch

Switching temperature 50C, +/-5C, thread G1/2"

€56.00*

#FA77617

asa Temperature switch IP69K

Switching temperature 50C, +/- 5C, thread G 1/2"~ without cable.

€67.00*

#61129

asa Vibration damper

Height (mm): 30 | Length (mm): 40 | Thread inside: M8x10 mm | Width (mm): 40 | max. pressure load (N): 800

Especially for oil coolers, spring material natural rubber.

Variants from €12.00*

€12.00*

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Oil cooler

Oil cooler 230v/400v

Asa cooling station as series

Accessories for oil coolers

Spare parts for oil coolers

Oil cooler 12v/24v

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.