Hydraulic top link

Our offer

-29 %

#FA41791

Blade holder suitable for RASSPE

Blade holder suitable for Rasspe drum mowers

€4.69* €6.59* (28.83% saved)

#21294

Schneider Compact multi-grab shovel with EURO holder

Version: 6 Zinken | Volume: 0,46 | Weight (kg): 240 | Width (mm): 1400

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share

Length (mm): 270 | Tine material: 25 x 8

Tine material 25x8.

€8.79*

-8 %

#FA109538

Schneider Coupling plate Avant

Base plate with Avant mount

€109.00* €119.00* (8.4% saved)

-10 %

#FA109546

Coupling plate for Schäffer farm loader, tubular frame mount

Weld-on coupling plate for attaching tools and equipment to the Schäffer farm loader with connection for shaped tube.

€169.00* €187.00* (9.63% saved)

-25 %

#FA54554

Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.00* €3.99* (24.81% saved)

-40 %

#FA63556

ESM Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-9 %

#FA72434

Schneider EURO three-point adapter Cat.2

Clearance adapter from EURO attachment on the front loader to implements with three-point attachment cat. 2. Very robust and lightweight design.The Euro adapter from Schneider makes it possible to use existing implements and implements with category 2 three-point linkage on front loaders with Euro linkage. The short upper top link, which can be used in two slots, and the lower lockable three-point hitches ensure safe handling of the tools and implements with the adapter.Load capacity 1000 kgWeight 50 kg

€319.00* €349.00* (8.6% saved)

-20 %

#FA51978

Feed mixer knife short 540x8mm for Mayer Siloking

Thickness 8mm

€39.90* €49.90* (20.04% saved)

-25 %

#FA19414

Friction strip 996 mm, 1 pair

€49.00* €65.00* (24.62% saved)

All Products

#106276

Ball eye for top link with left-hand thread

L (mm): 185 | Thread: M 36 x 3

Variants from €19.90*

€32.90*

#26738

Ball eye for top link with right-hand thread

Cat.: 1 | L (mm): 175 | Thread: M 30 x 3 | Width (mm): 44 | Ø bolt (mm): 19

Variants from €19.00*

€19.00*

#FA51762

Bracket on the tractor side for hydraulic top links

€9.90*

#FA28279

Gasket set for cylinder 70/35

sealing kit

€27.90*

-10 %

#FA120651

SAUGUT Hydraulic top link Cat.2 with catch hook and ball eye, stroke 200mm

The hydraulic top link Cat.2 SAUGUT from FAIE with catch hook and ball eye is a high-quality product that is suitable for a variety of applications. The top link has a stroke of 200 mm, a piston diameter (inner cylinder tube) of 60 mm and a piston rod diameter of 35 mm. The hydraulic top link can be used on tractors up to approx. 90 HP, has a pressure force of 5100 kg and a pulling force of 3620 kg.The top link is complete with connecting hoses(length 1m), Control chain equipped with catch hook, top link ball and stroke indicator. It also has a hydraulically unlockable check valve (locking block). ~The hydraulic top link from the SAUGUT series from FAIE is a robust and reliable product that is designed for a long service life. It is easy to assemble and operate and offers excellent performance.Piston K = 60mm, piston rod S 35mm up to approx. 90HP, pressure force approx. 5100kg, tensile force approx. 3620kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

€179.00* €199.00* (10.05% saved)

-12 %

#FA120652

SAUGUT Hydraulic top link Cat.2 with catch hook and ball eye, stroke 250mm

The hydraulic top link Cat.2 SAUGUT from FAIE with catch hook and ball eye is a high-quality product that is suitable for a variety of applications. The top link has a stroke of 250 mm, a piston diameter (inner cylinder tube) of 70 mm and a piston rod diameter of 35 mm. The hydraulic top link can be used on tractors up to approx. 120 HP, has a pressure force of 6927 kg and a pulling force of 5195 kg.The top link is complete with connecting hoses(length 1m), Control chain equipped with catch hook, top link ball and stroke indicator. It also has a hydraulically unlockable check valve (locking block). ~The hydraulic top link from the SAUGUT series from FAIE is a robust and reliable product that is designed for a long service life. It is easy to assemble and operate and offers excellent performance.Piston K = 70mm, piston rod S 35mm up to approx. 120HP, pressure force approx. 6927kg, tensile force approx. 5195kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

€189.00* €215.00* (12.09% saved)

-12 %

#FA123679

SAUGUT Hydraulic top link Cat.2 with catch hook, ball eye and top link bracket, stroke 200mm

The hydraulic top link Cat.2 SAUGUT from FAIE with catch hook and ball eye is a high-quality product that is suitable for a variety of applications. The top link has a stroke of 200 mm, a piston diameter (inner cylinder tube) of 60 mm and a piston rod diameter of 35 mm. The hydraulic top link can be used on tractors up to approx. 90 HP, has a pressure force of 5100 kg and a pulling force of 3620 kg.The top link is complete with connecting hoses(length 1m), Control chain for catch hook, top link ball and stroke indicator as well as a top link bracket. It also has a hydraulically unlockable check valve (locking block). ~The hydraulic top link from the SAUGUT series from FAIE is a robust and reliable product that is designed for a long service life. It is easy to assemble and operate and offers excellent performance.Piston K = 60mm, piston rod S 35mm up to approx. 90HP, pressure force approx. 5100kg, tensile force approx. 3620kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

€192.00* €219.00* (12.33% saved)

-14 %

#FA123680

SAUGUT Hydraulic top link Cat.2 with catch hook, ball eye and top link bracket, stroke 250mm

The hydraulic top link Cat.2 SAUGUT from FAIE with catch hook and ball eye is a high-quality product that is suitable for a variety of applications. The top link has a stroke of 250 mm, a piston diameter (inner cylinder tube) of 70 mm and a piston rod diameter of 35 mm. The hydraulic top link can be used on tractors up to approx. 120 HP, has a pressure force of 6927 kg and a pulling force of 5195 kg.The top link is complete with connecting hoses(length 1m), Control chain for catch hook, top link ball and stroke indicator as well as a top link bracket. It also has a hydraulically unlockable check valve (locking block). ~The hydraulic top link from the SAUGUT series from FAIE is a robust and reliable product that is designed for a long service life. It is easy to assemble and operate and offers excellent performance.Piston K = 70mm, piston rod S 35mm up to approx. 120HP, pressure force approx. 6927kg, tensile force approx. 5195kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

€198.00* €229.00* (13.54% saved)

#52793

Hydraulic top link with ball eyes on both sides

Installation length (EL) (mm): 692 | Length max (mm): 1092 | Length min (mm): 692 | Stroke (mm): 400

The hydraulic unlockable check valve prevents automatic adjustment and sinking under load. Scope of delivery: complete with connection hoses including plug and dust protection. Including hydraulically unlockable check valve (locking block).Piston K = 50mm, piston rod S = 25mm, up to approx. 70HP, pressure force 3534kg, pulling force 2650kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

Variants from €295.00*

€332.00*

#52801

Hydraulic top link with ball eyes on both sides

Installation length (EL) (mm): 557 | Length max (mm): 847 | Length min (mm): 557 | Stroke (mm): 290

The hydraulic unlockable check valve prevents automatic adjustment and sinking under load. Scope of delivery: complete with connection hoses including plug and dust protection. Including hydraulically unlockable check valve (locking block).Piston K = 70mm, piston rod S = 35mm, up to approx. 120HP, pressure force 6927kg, pulling force 5195kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

Variants from €315.00*

€335.00*

#25933

Hydraulic top link with catch hook and adjustable installation length

Stroke (mm): 240

The installation length can be continuously adjusted using the attachment on the tractor side with an M30 thread (Cat.2). Scope of delivery: complete with connection hoses including plug and dust protection, chain for catch hook, top link ball. Including hydraulically unlockable check valve (locking block), without ball eye or swivel bearing.Piston K = 70 mm, piston rod S = 35 mm, up to approx. 100 HP, pressure force 6927 kg, pulling force 5195 kg.The length refers to the bolt centre of the hook to the end of the screw-in sleeve!

€349.00*

#65364

Hydraulic top link with catch hook and ball eye cat.2 (25.4mm)

Installation length (EL) (mm): 617 | Length max (mm): 847 | Length min (mm): 617 | Stroke (mm): 230

Complete with connection hoses, timing chain for catch hook, top link ball and stroke indicator. Including hydraulically unlockable check valve (locking block).Piston K = 63mm, piston rod S 36mm up to approx. 90HP, pressure force 5600kg, pulling force 3900kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

Variants from €265.00*

€269.00*

#19907

Hydraulic top link with catch hook cat. 2

Installation length (EL) (mm): 557 | Length max (mm): 797 | Length min (mm): 557 | Stroke (mm): 240

Scope of delivery: complete with connection hoses including plug and dust protection, chain for catch hook, top link ball. Including hydraulically unlockable check valve (locking block).Piston K = 70mm, piston rod S = 35mm, up to approx. 120HP, pressure force 6927kg, pulling force 5195kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

Variants from €329.00*

€345.00*

#10108

Hydraulic top link with catch hook cat. 3

Installation length (EL) (mm): 632 | Length max (mm): 899 | Length min (mm): 632 | Stroke (mm): 267

Scope of delivery: complete with connection hoses including plug and dust protection, chain for catch hook, top link ball. Including hydraulically unlockable check valve (locking block).Piston K = 80mm,Piston rod S = 40mm, up to approx. 160 HP, pressure force 9047kg, pulling force 6785kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

Variants from €485.00*

€495.00*

#24991

Hydraulic top link with catch hook cat. 3

Length max (mm): 930 | Length min (mm): 660 | Stroke (mm): 270 | Ø bolt mm / Cat.: 32,3/3

Hydraulic top link with cat. 3 catch hook and articulated head support. Particularly suitable for mounting heavy implements. The top link is supplied with a hydraulically unlockable non-return valve (locking block). The connection hoses are complete with plug, dust protection and the appropriate screw-in connector for the locking block. The actuation chain for the catch hook and the top link ball are included in the scope of delivery. Suitable for tractors up to approx. 250 hp, piston Ø K = 90 mm, piston rod Ø S = 45 mm, pushing force 11451 kg, pulling force 8588 kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

Variants from €569.00*

€569.00*

#72063

Hydraulic top link with catch hook cat. 3

Length max (mm): 885 | Length min (mm): 635 | Stroke (mm): 250 | Ø bolt mm / Cat.: 25/2

Hydraulic top-link with hook Cat.3 and joint head. Particularly suitable for mounting heavy equipment. Including hydraulically unlockable check valve (locking block).Suitable for tractors up to approx. 200 HP, piston K = 80mm, piston rod S = 40mm, pressure force 9047kg, pulling force 6785kg.The specified lengths always refer to the centre of the pin to the centre of the pin!

Variants from €529.00*

€529.00*

#FA117355

Hydraulic top link with CBM catch hook and with bolt for the joint head

Suitable for tractors up to approx. 250 HP, piston K = 90mm, piston rod S = 45mm, pressure force 11451kg, pulling force 8588kg. With CBM catch hook Cat.3 including ball Cat. 3 32.2mm. Including hydraulically unlockable check valve (locking block), 2 hydraulic hoses with plug and dust caps, actuation chain for catch hook, top link bracket and lift indicator.Indication of the installation length including joint head.The specified lengths always refer to bolt centre to bolt centre including the knuckle !

€429.00*

#109329

Hydraulic top link with CBM catch hook Cat.3 and with bolt for the joint head

Installation length (EL) (mm): 670 | Length max (mm): 920 | Length min (mm): 670 | Stroke (mm): 250

Suitable for tractorsup to approx. 200 HP, piston K = 80mm, piston rod S = 40mm, pressure force 9047kg, pulling force 6785kg. CBM catch hook cat. 3 with ball cat. 3/2 25 mm, bolt 28 mm for joint head mount. Includes hydraulically unlockable check valve (locking block), 2 hydraulic hoses with connectors and dust caps, operating chain for catch hook and lift indicator. Indication of the installation length including the joint head.Please order the joint head that fits your top link bolt on the tractor/tractor with a bore of 25mm (Faie No. 102310), 28mm (Faie No. 102311) or 32mm (Faie No. 102312).The specified lengths always refer to bolt centre to bolt centre including the knuckle !

Variants from €379.00*

€385.00*

#109326

Hydraulic top link with CBM catch hook Cat.3 and with bolt for the joint head

Installation length (EL) (mm): 647 | Length max (mm): 857 | Length min (mm): 647 | Stroke (mm): 210

Suitable for tractor sup to approx. 140 HP, piston K = 70mm, piston rod S = 36mm, pressure force 6927kg, pulling force 5195kg. CBM catch hook cat. 3 with ball cat. 3/2 25 mm, bolt 28 mm for joint head mount. Including hydraulically unlockable check valve (locking block), 2 hydraulic hoses with plug and dust caps, actuation chain for catch hook and lift indicator.Indication of the installation length including joint head.Please order the joint head that fits your top link bolt on the tractor/tractor with bore 25mm (Faie No. 102310), 28mm (Faie No. 102311) or 32mm (Faie No. 102312).The specified lengths always refer to bolt centre to bolt centre including the knuckle !

€349.00*

#FA117353

Hydraulic top link with CBM catch hook Cat.3 and with bolt for the joint head

Suitable for tractors up to approx. 250hp, piston K = 90mm, piston rod S = 40mm, pressure force 11451kg, pulling force 9150kg. Suitable for Fiat, Ford, New Holland and Steyr Profi. CBM catch hook cat. 3, with ball cat. 3/2 25mm. Including hydraulically unlockable check valve (locking block), 2 hydraulic hoses with plug, actuation chain for catch hook, top link bracket and lift indicator.Indication of the installation length including joint head.The specified lengths always refer to bolt centre to bolt centre including the knuckle !

€419.00*

-42 %

#FA40220

Kugelauge, Kat. 3, M36x3 links

Linksgewinde M36x3, Kat. 3, Bohrung 32mm, Gewindelänge 200 mm, verzinkt.

€27.90* €47.90* (41.75% saved)

#26741

Pivot bearing for upper link with right-hand thread

Cat.: 2 | Thread: M 30 x 3 | Ø bolt (mm): 25

Variants from €72.00*

€72.00*

#102310

Rod head for hydraulic top link

Cat.: 2 | H (mm): 50 | d (mm): 28 | Ø D (mm): 25,4

Rod head for hydraulic top link. Installation length 63mm, width 50mm

Variants from €42.90*

€42.90*

#FA10498

Seal kit for cylinder 50/25

€30.90*

Seite 1 von 2

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Hydraulic top link

Hy top link fh cat.3

Hy top link without catch hook

Hy top link fh cat.2

Hy top link accessories

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.