Skip to main content Skip to search Skip to main navigation
Go to homepage

einfach besser Landwirtschaften

Plug connectors


Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*
€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-25 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.00* €3.99* (24.81% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)
-33 %

All Products

#121865
DNP Plug-in coupling sleeve can be coupled under pressure according to DIN 2353 series PKK3 Plug-in coupling sleeve can be coupled under pressure according to DIN 2353 series PKK3
BG/DN: 4/DN20 Series / pipe Ø: 22L Thread: M 30 x 2,0

Sleeve, external thread, light series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

Variants from €14.90*
€54.90*
#59938
Plug-in couplings can be coupled under pressure according to DIN 2353 series PKK3 with bulkhead thread Plug-in couplings can be coupled under pressure according to DIN 2353 series PKK3 with bulkhead thread
L4 (mm): 26 Series / pipe Ø: 12L Thread: M 18 x 1,5

Sleeve, external thread, light series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

Variants from €17.00*
€17.00*
#60862
Plug-in couplings can be coupled under pressure according to DIN 2353 series PKK3 with bulkhead thread Plug-in couplings can be coupled under pressure according to DIN 2353 series PKK3 with bulkhead thread
L4 (mm): 27 Series / pipe Ø: 15L Thread: M 22 x 1,5

Plug, external thread, lightweight series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

Variants from €9.99*
€9.99*
#101989
Push-pull coupling sleeve with screw-in thread and O-ring Push-pull coupling sleeve with screw-in thread and O-ring
Thread: G1/2 Zoll BSP AG

With O-ring seal. For screwing directly onto Bosch additional control units SB23. Suitable for all tractor types with Bosch SB23 control units e.g. Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor.Can be coupled under pressure!

Variants from €59.90*
€69.90*
#FA20484
Push-pull coupling sleeve with screw-in thread M22x1.5 and ring socket Push-pull coupling sleeve with screw-in thread M22x1.5 and ring socket

For the additional installation of a ring eye with an inner diameter of 22 mm. The total length of the coupling including the connecting piece for the ring eye and the screw-in thread is 134.80mm.Suitable for Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor. Can be coupled under pressure!

€72.90*
#FA129516
Push-pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L Push-pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L

​Push-pull plug-in coupling suitable for Fendt SCR, S4 and Gen6 series.Length (without thread) L: 80 mmL1: 30 mmBulkhead thread 15LSize: BG 3Standard designation: ISO 7241-1 A

€99.00*
#FA125550
Push-Pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L Push-Pull plug-in coupling for Fendt with bulkhead thread M22x1.5 15L

Push-pull plug-in coupling suitable for Fendt with collar and O-ring groove for attaching the Fendt original oil leak housing.​Length (without thread): 110mmExternal thread: M22x1.5 bulkhead thread 15L Size: BG 3Standard designation: ISO 7241-1 A

€79.90*
#FA29579
VOSWINKEL Sleeve suitable for Unimog and MB-Trac Sleeve suitable for Unimog and MB-Trac

with zinc die-cast sleeve and push-pull designSleeve with nose M22x1.5 IT

€25.90*
#FA29581
VOSWINKEL Sleeve suitable for Unimog and MB-Trac Sleeve suitable for Unimog and MB-Trac

with zinc die-cast sleeve and push-pull designSleeve with hinged cover M22x1.5 IT

€29.00*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.