Browse through our special offers and discover lots of great items at attractive prices!
Go to homepage

einfach besser Landwirtschaften
€0.00Test

Plug connectors

Push-pull external thread bulkhead

Iso standard internal thread

Push-pull external thread

Stainless steel pbox

Internal thread series pdv1

Pressure-lockable external thread.

Coupling sleeves suitable for

Push-pull internal thread

Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*
€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-25 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.00* €3.99* (24.81% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)
-33 %
#FA49567
Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€21.90* €32.90* (33.43% saved)

All Products

#FA46202
VOSWINKEL Coupling sleeve Coupling sleeve

Suitable for Steyr Series 80 with bulkhead thread, M22x1.5 IT.

€36.00*
#FA52264
Coupling sleeve push-pull 3/4-16UNF, long bulkhead thread" Coupling sleeve push-pull 3/4-16UNF, long bulkhead thread"

Suitable for Claas, Renault. Can be coupled under pressure.

€72.90*
#FA110544
Faster Coupling sleeve push-pull 7/8-14UNF, long bulkhead thread Coupling sleeve push-pull 7/8-14UNF, long bulkhead thread

Suitable for Valtra. Can be coupled under pressure.

€69.90*
#FA20477
Coupling sleeve push-pull M22x1.5 / 15L bulkhead thread Coupling sleeve push-pull M22x1.5 / 15L bulkhead thread

With bulkhead thread for screwing through to existing tractor consoles. Suitable for Case-IHC, Deutz, JCB-Fastrac, MF, New Holland, Steyr, Valmet, Zetor. Can be coupled under pressure!

€71.90*
#FA100197
DNP Coupling sleeve push-pull with internal thread 1/2NPTF" Coupling sleeve push-pull with internal thread 1/2NPTF"

For direct mounting on original adapters suitable for Case, Fiat, New Holland and Steyr. Can be coupled under pressure!

€69.00*
#FA29040
Coupling sleeve push-pull with screw-in thread M22x1.5 flat sealing Coupling sleeve push-pull with screw-in thread M22x1.5 flat sealing

With soft seal for sealing valves with a sealing edge surface.

€65.90*
#31565
Plug-in coupling according to DIN 2353 - heavy series PPV3 Plug-in coupling according to DIN 2353 - heavy series PPV3
Series / pipe Ø: 16S Thread: M 24 x 1,5

Sleeve, external thread,push-pull design

Variants from €9.99*
€9.99*
#8822
Plug-in coupling according to DIN 2353 - heavy series PPV3 Plug-in coupling according to DIN 2353 - heavy series PPV3
Series / pipe Ø: 12S Thread: M 20 x 1,5

Plug, external thread,push-pull design.

Variants from €4.90*
€4.90*
#24328
Plug-in coupling according to DIN 2353 - lightweight series PPV3 Plug-in coupling according to DIN 2353 - lightweight series PPV3
BG: 3 BG/DN: 3/DN13 Flow rate (l/min): 45-90 Nominal size: DN13 Operating pressure (bar): 250 SW (mm): 30 Series / pipe Ø: 10L Thread: M 16 x 1,5 Ø E (mm): 38 Ø Z (mm): 20,55

Sleeve, external thread,push-pull design.

Variants from €9.99*
€9.99*
#2489
DNP Plug-in coupling according to DIN 2353 - lightweight series PPV3 Plug-in coupling according to DIN 2353 - lightweight series PPV3
BG: 3 BG/DN: 3/DN13 Flow rate (l/min): 45-90 Nominal size: DN13 Operating pressure (bar): 250 SW (mm): 30 Series / pipe Ø: 12L Thread: M 18 x 1,5 Ø E (mm): 38 Ø Z (mm): 20,55

Plug, external thread,push-pull design.

Variants from €4.90*
€4.90*
#20562
Plug-in coupling according to DIN 2353 with bulkhead thread series PPV3 Plug-in coupling according to DIN 2353 with bulkhead thread series PPV3
BG: 3 BG/DN: 3/DN13 Nominal size: DN13 SW (mm): 30 Series / pipe Ø: 8L Thread: M 14 x 1,5 Ø E (mm): 38 Ø Z (mm): 20,55

Sleeve, external thread, light series with bulkhead thread,push-pull design.

Variants from €12.99*
€12.99*
#4011
Plug-in coupling according to DIN 2353 with bulkhead thread series PPV3 Plug-in coupling according to DIN 2353 with bulkhead thread series PPV3
BG: 3 BG/DN: 3/DN13 Nominal size: DN13 SW (mm): 30 Series / pipe Ø: 12L Thread: M 18 x 1,5 Ø E (mm): 38 Ø Z (mm): 20,55

Plug, external thread, lightweight series with bulkhead thread, push-pull design.

Variants from €6.19*
€6.19*
#27353
DNP Plug-in coupling according to DIN 3852, form Y, series PPV3 Plug-in coupling according to DIN 3852, form Y, series PPV3
Series / pipe Ø: 15L Thread: M 22 x 1,5

Plug, internal thread.Push-Pull design.

Variants from €4.99*
€4.99*
#27352
Plug-in coupling according to DIN 3852, form Y, series PPV3 Plug-in coupling according to DIN 3852, form Y, series PPV3
Series / pipe Ø: 12L Thread: M 18 x 1,5

Sleeve, internal thread.Push-Pull design.

Variants from €10.90*
€10.90*
#1128
DNP Plug-in coupling according to ISO standard series 'A' with IG series PAV1 Plug-in coupling according to ISO standard series 'A' with IG series PAV1
BG: 5 Flow rate (l/min): 189-280 Nominal size: DN25 Operating pressure (bar): 200 Pression max (bar): 250 SW (mm): 41 Thread: R 1 Zoll Ø E (mm): 52 Ø Z (mm): 34,35

Plug

Variants from €3.49*
€18.00*
#1127
DNP Plug-in coupling according to ISO standard series 'A' with IG series PAV1 Plug-in coupling according to ISO standard series 'A' with IG series PAV1
BG: 5 Flow rate (l/min): 189-280 Nominal size: DN25 Operating pressure (bar): 200 Pression max (bar): 250 SW (mm): 41 Thread: R 1 Zoll Ø E (mm): 52 Ø Z (mm): 34,35

sleeve

Variants from €6.99*
€32.00*
#105008
DNP Plug-in coupling DNP series PDV1, interchangeable with many manufacturers such as Faster, Parker, Tema, etc. Plug-in coupling DNP series PDV1, interchangeable with many manufacturers such as Faster, Parker, Tema, etc.
BG: 4 BG/DN: 4/DN20 Flow rate (l/min): 106-190 Nominal size: DN20 Operating pressure (bar): 250 Pression max (bar): 250 SW (mm): 34 Thread: R 3/4 Zoll Ø E (mm): 47 Ø Z (mm): 28,0

sleeve

Variants from €7.79*
€20.90*
#105007
DNP Plug-in coupling DNP series PDV1, interchangeable with many manufacturers such as Faster, Parker, Tema, etc. Plug-in coupling DNP series PDV1, interchangeable with many manufacturers such as Faster, Parker, Tema, etc.
BG: 2 BG/DN: 2/DN10 Flow rate (l/min): 23-46 Nominal size: DN10 Operating pressure (bar): 250 Pression max (bar): 350 SW (mm): 24 Thread: R 3/8 Zoll Ø E (mm): 34 Ø Z (mm): 19,0

Plug

Variants from €3.79*
€3.79*
#25549
Plug-in coupling Eco-Quality BG3, double pack Plug-in coupling Eco-Quality BG3, double pack
Series / pipe Ø: 15L Thread: M 22 x 1,5

According to ISO 7241-1A, push-pull versionsleeve

Variants from €16.49*
€16.49*
-21 %
#25533
Plug-in coupling Eco-Quality BG3, double pack Plug-in coupling Eco-Quality BG3, double pack
Series / pipe Ø: 15L Thread: M 22 x 1,5

According to ISO 7241-1A, push-pull versionplug

Variants from €7.79*
€7.79* €9.80* (20.51% saved)
#2488
DNP Plug-in coupling female according to DIN 3852, form Y, series PPV3 Plug-in coupling female according to DIN 3852, form Y, series PPV3
Thread: G 1/2 Zoll

Quick-release coupling female in a push-pull design with an internal thread in accordance with DIN 3852. The female is sealed by a cone-seat valve with a strong spring to minimise oil leakage during coupling.

Variants from €10.90*
€10.90*
#134742
DNP Plug-in coupling male according to DIN 3852, form Y, series PPV3 Plug-in coupling male according to DIN 3852, form Y, series PPV3
Thread: G 3/4 Zoll

Quick-release coupling male with female thread to DIN 3852. The male is sealed by a cone-seat valve with a strong spring to minimise oil leakage during coupling.

Variants from €4.99*
€19.99*
#121866
DNP Plug-in coupling plug can be coupled under pressure according to DIN 2353 series PKK3 Plug-in coupling plug can be coupled under pressure according to DIN 2353 series PKK3
BG/DN: 4/DN20 Series / pipe Ø: 22L Thread: M 30 x 2,0

Plug, external thread, lightweight series,Push-Pull design. Never have to worry about connecting pressurized hydraulic hose lines again! No cumbersome handling with pliers!

Variants from €8.75*
€25.90*
#FA10801
Plug-in coupling sleeve BG3 DN13 with 1/2 IG - double SPAR pack Plug-in coupling sleeve BG3 DN13 with 1/2 IG - double SPAR pack

according to ISO standard series "~A"~ with IG series PAV1 sleeveNew: with dust protection

€9.80*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.