Flat sealing external thread

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

-21 %

#FA7700

Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)

All Products

Steckkupplung flachdichtend mit AG - leichte Baureihe Serie PLT4

#73338

Flat-sealing plug-in coupling with male thread - lightweight series PLT4 series Flat-sealing plug-in coupling with male thread - lightweight series PLT4 series

BG: 3 BG/DN: 3/DN20 Flow rate (l/min): 45-90 Nominal size: DN20 SW (mm): 36 Series / pipe Ø: 15L Thread: M 22 x 1,5 Ø E (mm): 38 Ø Z (mm): 24,6

Plug, according to DIN 2353 and ISO 16028.

€20.90*

Variants from €9.39*

#6308

Flat-sealing plug-in coupling with male thread - lightweight series PLT4 series Flat-sealing plug-in coupling with male thread - lightweight series PLT4 series

BG: 2 BG/DN: 2/DN13 Flow rate (l/min): 23-46 Nominal size: DN13 SW (mm): 30 Series / pipe Ø: 10L Thread: M 16 x 1,5 Ø E (mm): 32 Ø Z (mm): 19,8

Sleeve, according to DIN 2353 and ISO 16028.

€27.90*

Steckkupplung flachdichtend mit AG - schwere Baureihe Serie PLT4

#31717

DNP Flat-sealing plug-in female coupling with male thread - heavy-duty series PLT4 Flat-sealing plug-in female coupling with male thread - heavy-duty series PLT4

BG: 3 BG/DN: 3/DN20 Flow rate (l/min): 45-90 Nominal size: DN20 SW (mm): 36 Series / pipe Ø: 16S Thread: M 24 x 1,5 Ø E (mm): 38 Ø Z (mm): 24,6

The PLT4 series flat-face push-fit coupling sockets are standardised hydraulic push-fit coupling components manufactured in accordance with ISO standard 16028. The flat face enables leak-free and drip-free coupling and uncoupling of hydraulic lines. Thanks to full compliance with ISO standard 16028, the coupling is universally interchangeable with flat-sealing couplings from other leading manufacturers.Operating pressure: 350–500 bar, depending on sizeLeak-free: When uncoupled, the system remains sealed – no oil escapes and no air enters the systemSafety locking mechanism: The sliding sleeve features a safety locking system to prevent accidental disconnection; this is activated by turning the sleeve after couplingHousing made of high-strength galvanised steel, with Zn-Fe and Zn-Ni finishesStandard seals made of NBR

€29.90* €39.90* (25.06% saved)

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.