Multi-way ball valves

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#FA117225

4/3-way valve mechanically reversible, centre position closed, for pipework installation 4/3-way valve mechanically reversible, centre position closed, for pipework installation

The manually operated 4/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control a double-acting hydraulic consumer such as a double-acting hydraulic cylinder. The 4/3-way valve enables the oil flow to be switched from port A to port B.In the centre position, all connections are closed. In this switching position, the flow through the valve is blocked.

€85.00*

#FA122175

6/2-way valve, mechanically reversible, flow rate 120 l/min, R3/4 Zoll, centre position closed, for pipework installation 6/2-way valve, mechanically reversible, flow rate 120 l/min, R3/4 Zoll, centre position closed, for pipework installation

The manually operated 6/2-way changeover valve DEV has the function of a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied by the upstream control unit, which retains all control functions.In the centre position, all connections are closed.

€159.00*

#115869

6/2-way valve, mechanically switchable, closend center, for pipe installation 6/2-way valve, mechanically switchable, closend center, for pipe installation

Flow rate (l/min): 90+90 Pression max (bar): 250 Thread A: R 1/2 Zoll

The hand-operated 6/2-way switching valve DEV functions as a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied with power from the upstream control unit, where all control functions are retained.In the centre position, all connections are closed.

Variants from €109.00*

€129.00*

#105805

6/2-way valve, mechanically switchable, open center, for pipe installation 6/2-way valve, mechanically switchable, open center, for pipe installation

Flow rate (l/min): 200+200 Pression max (bar): 220 Thread A: R 1 Zoll

Variants from €109.00*

€189.00*

#115367

8/3-way valve mechanically reversible, centre position open, for pipework installation 8/3-way valve mechanically reversible, centre position open, for pipework installation

Flow rate (l/min): 60+60 Pression max (bar): 300 Thread A: R 3/8

The manually operated 8/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control 2 double-acting hydraulic consumers, e.g. two double-acting hydraulic cylinders. The 8/3-way valve enables the oil flow to be switched from port A to port B and port A1 to port B1.In the centre position, all connections are connected to each other.

Variants from €149.00*

€149.00*

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.