Ball valves & stroke limiters

Our offer

-29 %

#FA41791

Blade holder suitable for RASSPE

Blade holder suitable for Rasspe drum mowers

€4.69* €6.59* (28.83% saved)

#21294

Schneider Compact multi-grab shovel with EURO holder

Version: 6 Zinken | Volume: 0,46 | Weight (kg): 240 | Width (mm): 1400

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share

Length (mm): 270 | Tine material: 25 x 8

Tine material 25x8.

€8.79*

-25 %

#FA54554

Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.00* €3.99* (24.81% saved)

-40 %

#FA63556

ESM Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-25 %

#FA19414

Friction strip 996 mm, 1 pair

€49.00* €65.00* (24.62% saved)

-22 %

#FA34389

Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet

Color: rot | Type: 3070-04VP

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

Schröckenfux M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#31505

3-way changeover ball valve with external thread, heavy series, L-bore

Series / pipe Ø: 12S | Thread: M 20 x 1,5

According to DIN 2353, for pipe connection, with L-hole

Variants from €35.90*

€35.90*

#27899

3-way changeover ball valve with external thread, light series, L-bore

Series / pipe Ø: 8L | Thread: M 14 x 1,5

According to DIN 2353, for pipe connection, with L-hole

Variants from €29.90*

€34.90*

#28337

3-way changeover tap with internal thread

Connection: R1/2 Zoll

According to DIN/ISO 228, with L-hole

Variants from €33.90*

€37.90*

#FA117225

4/3-way valve mechanically reversible, centre position closed, for pipework installation

The manually operated 4/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control a double-acting hydraulic consumer such as a double-acting hydraulic cylinder. The 4/3-way valve enables the oil flow to be switched from port A to port B.In the centre position, all connections are closed. In this switching position, the flow through the valve is blocked.

€85.00*

#FA122175

6/2-way valve, mechanically reversible, flow rate 120 l/min, R3/4 Zoll, centre position closed, for pipework installation

The manually operated 6/2-way changeover valve DEV has the function of a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied by the upstream control unit, which retains all control functions.In the centre position, all connections are closed.

€159.00*

#115869

6/2-way valve, mechanically switchable, closend center, for pipe installation

Flow rate (l/min): 90+90 | Pression max (bar): 250 | Thread A: R 1/2 Zoll

The hand-operated 6/2-way switching valve DEV functions as a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied with power from the upstream control unit, where all control functions are retained.In the centre position, all connections are closed.

Variants from €109.00*

€129.00*

#105805

6/2-way valve, mechanically switchable, open center, for pipe installation

Flow rate (l/min): 200+200 | Pression max (bar): 220 | Thread A: R 1 Zoll

Variants from €109.00*

€189.00*

#115367

8/3-way valve mechanically reversible, centre position open, for pipework installation

Flow rate (l/min): 60+60 | Pression max (bar): 300 | Thread A: R 3/8

The manually operated 8/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control 2 double-acting hydraulic consumers, e.g. two double-acting hydraulic cylinders. The 8/3-way valve enables the oil flow to be switched from port A to port B and port A1 to port B1.In the centre position, all connections are connected to each other.

Variants from €149.00*

€149.00*

#4720

Block ball valve with external thread, heavy series

Series / pipe Ø: 14S 14 mm | Thread: M 22 x 1,5

Variants from €19.90*

€32.00*

#5596

Block ball valve with external thread, light series

Series / pipe Ø: 15L | Thread: M 22 x 1,5

According to DIN 2353, for pipe connection.

Variants from €19.90*

€21.90*

#1159

Block ball valve with internal thread

Connection: R3/8 Zoll

According to DIN/ISO228.

Variants from €21.75*

€21.75*

#1195

Handle cranked

H (mm): 65 | K (mm): 165 | Square (mm): 12

Offset handle made of die-cast zinc in natural color. Eg, for ball valves or changeover valves with a square shaft extension.

Variants from €5.19*

€9.99*

#1194

Handle straight

K (mm): 200 | Square (mm): 14

Red anodized aluminum handle. Eg, for ball valves or changeover valves with a square shaft extension.

Variants from €9.50*

€14.90*

#1198

Stroke limiter

Series / pipe Ø: 15L | Thread: M 22 x 1,5

Stroke limitation of single-acting hydraulic cylinders before the end of the stroke. E.g.: tipping cylinders of truck bodies and agricultural. followers.

Variants from €41.90*

€41.90*

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Ball valves & stroke limiters

Stroke limiter

Multi-way ball valves

2-way shut-off valves

Accessories & spare parts

3-way diverter ball valves

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.