Hydraulic program

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Aluminum oil air cooler in panel construction. Maximum operating pressure 26 bar, protection class IP68.Oil coolers are used in continuous operation of hydraulic systems to cool the hydraulic oil. However, oil coolers are primarily installed on systems that have been subsequently equipped with additional hydraulic consumers. In many cases, the tank contents are not increased during these conversion work and this increases the circulation and temperature of the oil in the hydraulic system. The optimal operating temperature of a hydraulic system is between 50-60C. If the temperature increases too much, the excess heat must be dissipated via an oil/air cooler.In order to determine the size of the oil cooler, we need some data from you for the calculation:- Gear pump or control pump- Pump delivery rate in L/min- Tank capacity in L (if known)- Oil pressure in the hydraulic system in bar- Ambient temperature in C- Oil temperature of the hydraulic system in C - Connection voltage in VWe will be happy to calculate the oil cooler you need and look forward to your inquiry.

Banjo screw for attaching ring eyes and ring soldering pieces

To close a hydraulic connection, ie a double-acting cylinder becomes a single-acting cylinder.

According to DIN 2353, for pipe connection.

According to DIN/ISO228.

​Mechanical actuation with spring return as standard. The neutral position is achieved via a pressure-free return circuit, and ports A & B are connected to the reservoir. Pressure relief valve on port P (pump). Negative overlap of the spools.Standard configuration of the valves in parallel.Max. flow rate: 45 L/min.Operating pressure: 250 barMax. pressure: 320 barPressure relief valve set to: 140 bar, adjustable from 100–250 barThreaded connections A, B, P, T: R3/8″Threaded connections P2, T2: R1/2″H-R = Lift engaged, SW = Neutral position – float position, S = LowerThe switching positions listed depend on the specific model of the control valve.

Mechanical actuation with spring return as standard. The middle position is designed with a pressureless circulation and the ports A &~ B are blocked. Pressure relief valve at connection P (pump). Negative overlap of the slides.Standard version of the valves in parallel connection.Design: BM70Flow max.: 80L/minOperating pressure: 250 barmax. Pressure: 320 barRelief valve set: 140 bar, adjustable from 100-250 barScrew-in thread A, B, P, T,: R1/2?Screw-in thread P2, T2: R3/4?H-R = Lift (locked), SW = Centre position – float position, S = Lower.The switching positions listed depend on the respective model of the control valve.

Bolt with tab galvanized, there is an additional hole in the tab to secure the bolt against twisting or loss

This top link bracket enables hydraulic top links to be securely mounted on the tractor and ensures a stable attachment to the tractor. The robust design makes installation easy and reliably holds the top link in position when it is not in use. Suitable as a practical retrofit or spare part for hydraulic top links. Advantages & Features • Simple, robust mounting for the retaining bracket of a top link. • Tractor-side design – secure and neat mounting. • Robust steel construction – durable and resilient in daily use. • Easy retrofitting – ideal as a replacement or addition to agricultural vehicles. Frequently Asked Questions What is the mount used for? It is used to secure or mount the retaining bracket of a (hydraulic) top link on the tractor side. Is the bracket suitable for retrofitting? Yes, it is suitable as a spare part or for retrofitting compatible tractors. Is a top link bracket or a top link included in the scope of delivery? No, only the tractor-side bracket is supplied. Translated with DeepL.com (free version)

With 2 return springs. Single-acting, total length: 360 mm, stroke: 110 mm, piston rod 30 mm, connection: R3/8"~ IG.

With built-in return spring, installation length: 280 mm, stroke: 100 mm, cylinder inner 40 mm, connection: R1/4"~ Female thread, cylinder outer 50 mm, bolt 21 mm, fork slot 14.5x40 mm,

​Pull cylinder with built-in release spring, installation length centre-to-centre 405 mm, total length 430 mm, stroke: 85 mm, cylinder inner diameter 35 mm, cylinder outer diameter 45 mm, piston rod 25 mm, forks with 11 mm holes, connection: R 3/8"UF AG.

Steel flex, bright, external thread M10x1 that can be rotated on both sides with internal and external cones.

Straight bulkhead adapter with inch external thread and 60 internal cone.The adapters with a long thread on one side (bulkhead thread) are used to route and attach hydraulic lines to sheet metal parts, frame parts, etc. The bulkhead adapters are attached with the lock nut on the long thread.

Centering ring for hydraulic pumps of assembly 2 in order to be able to use them on the gearbox of assembly 3. The ring has an outer diameter of 66mm and an inner diameter (centering seat of the BG 2 hydraulic pump) of 36.5mm.

Serves to hold large loads and to bridge load peaks.Single-acting check valve. Particularly suitable for single-acting hydraulic cylinders on reversible plows. Max. pressure 350 bar, control ratio 4:1

Serves to protect a hydraulic component against pressure peaks caused by external loads. Opening pressure 0.5bar

For fastening in through holes or in tear-off holders. For shaft diameter 38mm, dimension 38x1.75 DIN471