Hydraulic program

With check valve and emergency drain screw. Can be used as an electromagnetic stopcock, as an opener or closer for simple hydraulic controls. Duty cycle 100%.

With check valve and emergency drain screw. Can be used as an electromagnetic stopcock, as an opener or closer for simple hydraulic controls. Duty cycle 100%.

According to DIN 2353, for pipe connection, with L-hole

According to DIN 2353, for pipe connection, with L-hole

According to DIN/ISO 228, with L-hole

portion that is resilient can be extracted from a pipeline with a large flow rate. For example, to supply two separate hydraulic circuits using a large hydraulic pump. Port P has priority. Connections: E=pump, P=adjustable preferred current, B=remaining quantity, QE=max. Input quantity, QP= max. regulated output quantity at connection P.Max pressure 210 bar.

The pressure-compensated 3-way throttle valve allows a constant fluid flow to be set at port P regardless of pressure fluctuations. The excess flow is directed to port B, which can be used as a second service port or return port to a vessel.If port B is used as a second service port, the pressure must not exceed the pressure at port P.Rated size 6 max. Flow 60 L/min, controlled quantity up to max. 30L/minmax. Pressure 315 bar3-way pressure compensatorControl element: rotary knobConnection thread: G1/2"Connection explanation: E = input, P = regulated quantity, B = residual flow ~< br>

The valve is designed as a 3/2-way changeover valve. In the neutral position, connection P is connected to connection A~ when energized, connection P is connected to connection B. The control magnet can be supplied for different operating voltages. Small internal leaks are permitted because the valve is designed as a slide valve. A magnetic plug (FAIE No. 28483) can optionally be supplied. The valve can be used in all common hydraulic systems. Technical data: max. operating pressure: 250 bar max. return pressure: 10 bar< br> Nominal flow: 40 l/min Tightening torque: 78 Nm Coverage: positive Connections: G3/8 Weight: 2.46 kg Dimensions: 162.5x46x65 mm Operating fluid: Hydraulic oil according to DIN 51524 Viscosity: 10-200 Operating temperature: -20 to +80C

Can be used as an electromagnetic 3-way tap. Basic position de-energized - continuity from P to B. Switched position - continuity from P to A. 100% duty cycle.

to fixed part with lever

​The manually operated 4/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control a double-acting hydraulic consumer such as a double-acting hydraulic cylinder. The 4/3-way valve enables the oil flow to be switched from port A to port B.In the centre position, all connections are closed. In this switching position, the flow through the valve is blocked.

to fixed part with lever

6/2-way changeover valves are suitable for tractors and tractors, attachments, telehandlers, excavators, backhoe loaders, wheel loaders and many other machines. Switching valves are used to switch a double function through electrical control. The application takes place between a hydraulic control block and two different hydraulic functions or hydraulic consumers. Basic position without current - continuity P1/P2 to C/D. Switched position - continuity P1/P2 to A/B. Duty cycle 100%. With leak oil connection R1/4",directional valve 8/3, double flanged, galvanized.

6/2-way changeover valves are suitable for tractors and tractors, attachments, telehandlers, excavators, backhoe loaders, wheel loaders and many other machines. Switching valves are used to switch a double function through electrical control. The application takes place between a hydraulic control block and two different hydraulic functions or hydraulic consumers. Basic position without current - continuity P1/P2 to C/D. Switched position - continuity P1/P2 to A/B. Duty cycle 100%. With leak oil connection R1/4",directional valve 8/3, double flanged, galvanized.The specified operating pressure refers to operation without a connected leak oil line!

e.g. for front loaders to operate the front loader bucket and to open and close the silo bale gripper via 1 control valve. 6/2-way changeover valves are suitable for tractors and tractors, attachments, telehandlers, excavators, backhoe loaders, wheel loaders and many other machines. Switching valves are used to switch a double function through electrical control. The application takes place between a hydraulic control block and two different hydraulic functions or hydraulic consumers. Flow 50 L/min, voltage 12 V, connections R1/2", operating pressure 250 bar. With leak oil line.The specified operating pressure refers to operation without a connected leak oil line!

e.g. for front loaders to operate the front loader bucket and to open and close the silo bale gripper via 1 control valve. 6/2-way changeover valves are suitable for tractors and tractors, attachments, telehandlers, excavators, backhoe loaders, wheel loaders and many other machines. Switching valves are used to switch a double function through electrical control. The application takes place between a hydraulic control block and two different hydraulic functions or hydraulic consumers. Flow 50 L/min, voltage 24 V, connections R1/2".The specified operating pressure refers to operation without a connected leak oil line!

6/2-way changeover valves are suitable for tractors and tractors, attachments, telehandlers, excavators, backhoe loaders, wheel loaders and many other machines. Switching valves are used to switch a double function through electrical control. The application takes place between a hydraulic control block and two different hydraulic functions or hydraulic consumers. Basic position without current - continuity from P1/P2 to C/D. Switched position - continuity from P1/P2 to A/B. 100% duty cycle. With leak oil connection R 1/4"The specified operating pressure refers to operation without a connected leak oil line!

e.g. for front loaders to operate the front loader bucket and to open and close the silo bale gripper via 1 control valve. 6/2-way changeover valves are suitable for tractors and tractors, attachments, telehandlers, excavators, backhoe loaders, wheel loaders and many other machines. Switching valves are used to switch a double function through electrical control. The application takes place between a hydraulic control block and two different hydraulic functions or hydraulic consumers. Flow 50 L/min, voltage 12 V, connections R3/8".The specified operating pressure refers to operation without a connected leak oil line!

The 6/2-way valve is suitable for expanding a double-acting hydraulic function. e.g. for front loaders to operate the front loader bucket and to open and close the silo bale gripper via 1 control valve. Without current, the oil flows from ports P1 and P2 to ports C and D. If the magnet is energized, the oil flow is diverted from ports P1 and P2 to the additional consumers A and B. This valve can be used as a universal valve and can can be expanded directly with the same valve. Small internal leaks are permitted because the valve is designed as a slide valve.

​The manually operated 6/2-way changeover valve DEV has the function of a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied by the upstream control unit, which retains all control functions.In the centre position, all connections are closed.

​The hand-operated 6/2-way switching valve DEV functions as a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied with power from the upstream control unit, where all control functions are retained.In the centre position, all connections are closed.

The hand-operated 6/2-way switching valve DEV functions as a hydraulic switch. This function allows several double-acting consumers to be connected and operated with a time delay. The consumers are supplied with power from the upstream control unit, where all control functions are retained.In the centre position, connections P, A and B are connected. The connections P1, A1 and B1 are also connected.

​The manually operated 8/3-way valve INV has the function of a hydraulic control valve. The changeover valve can be used to control 2 double-acting hydraulic consumers, e.g. two double-acting hydraulic cylinders. The 8/3-way valve enables the oil flow to be switched from port A to port B and port A1 to port B1.In the centre position, all connections are connected to each other.

The additional control device is a 5/4-way valve, which is operated manually to control hydraulic consumers. It is a four-position control device that can be used for double and single-acting lifting cylinders. It has slide-sealed cylinder ports A and B. This means that extremely low leakage is permitted at high loads. The device has a grid position in the lifting position, which is equipped with a hydraulic-automatic limit switch. If you switch further via the lowering position, the locked floating position is switched on, which is not unlocked hydraulically (consumer connections A and B connected to each other for the return). The floating position can be used as a locked lowering position for both double-acting and single-acting lifting cylinders. The additional control unit can be switched from double-acting to single-acting during operation. The operating lever is included in delivery.