Mower spare parts

​Bottom knife for Busatis double knife bar with a total number of 24 blades. Of these, 3 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 76 mm. The blade is supplied complete with the riveted-on lower blade head, on the left-hand side when viewed in the direction of travel. Suitable for Bucher and Reform Kombi M12 motorised mowers with Busatis double blade mower. Overall length with cutterhead: 184 cm Length of cutter back: 181 cm Cutter head on the left in the direction of travel, 28 mm projection over the cutter back Cutterhead length: 360 mm Total number of blades: 24, of which 3 blades with knobPosition of the blades with knob starting from the cutterhead: 5th, 12th and 19th blade Blade pitch (blade centre to blade centre): 76 mm

Bottom knife for bidux double knife bar with a total number of 24 blades. Of these, 4 pcs. blades with knob for holding the knife guide arms. The pitch of the blades from blade centre to blade centre is 84 mm. The blade is supplied complete with the riveted-on lower blade head, on the left-hand side when viewed in the direction of travel. Total length with knife head: 2020 mm Length of knife back: 1990 mm Cutter head 5840.055.01, 345.0770 Protrusion of knife head over knife back: 28 mm Length of knife head: 400 mm Tang knife head: 18 mmTotal number of blades: 24, of which 4 blades with knobPosition of the blades with knob starting from the knife head: 6th, 11th, 16th and 21st. Blade and blade pitch (blade center to blade center): 84mm

Bottom knife 26 blades DME1606B

Connection joint between rocker arm and bedknife head. Thread M14x1.5, bore 18mm, left

Connection joint between rocker arm and bedknife head. Thread M14x1.5, bore 18mm, right

Thread M14x1.5, pin hole 16 mm.

Bottom knife to double knife bar bidux system with a total number of blades of 26 pieces. 4 of these are blades with mushrooms to hold the knife guide arms. The pitch of the blades in the distance from blade center to blade center is 84mm. The knife is delivered complete with the riveted bottom cutter head, seen on the left side in the direction of travel.Suitable for Aebi Mähtrac TT33 and Rapid MT200 with double-blade front mower and for Busatis rear and side mower BM 1205.

Bottom knife to double knife bar bidux system with a total number of blades of 30 pieces. 5 of these are blades with mushrooms to hold the knife guide arms. The pitch of the blades is 84mm distance from blade center to blade center. The knife is delivered complete with the riveted bottom cutter head. Suitable for Aebi Mhtrac TT33 with double knife front mower and for Busatis rear and side mower BM 1205.

​​Bottom knife for the bidux ESM double-blade bar, compatible with Aebi, IBEX and Köppl, with a total of 29 blades. Four of these are blades with knob for attaching the knife guide arms. The spacing between the centres of the blades is 70 mm. The knive is supplied without the blade head, which is screwed onto the left-hand side when viewed in the direction of travel. The upper-knive-head is secured with 3 M8 fixing screws. The blades with knob are positioned at the 5th, 12th, 18th and 25th blades.

Bottom knife for the bidux double-blade bar system, with a total of 28 blades. Of these, 5 are blades with knob for mounting the blade guide arms. The spacing between the centres of the blades is 84 mm. The knife is supplied complete with the riveted Bottom blade head, located on the left-hand side when viewed in the direction of travel.Suitable for the Nussmüller-Rasant with bidux double-blade mower.Total length including blade head: 234 cmLength of blade backs: 233 cmBlade head on the left-hand side when viewed in the direction of travel, offset 7 mm outwards; blade head length: 380 mmTotal number of blades: 28, of which 5 are blades with knob, position of the blades with knob relative to the blade head: 9th, 11th, 16th, 21st, and 25th bladesBlade spacing (centre to centre): 84 mm

Suitable for Bucher M500, M550, Record

Lower knife for Busatis double knife bar with a total number of blades of 23 pieces. Of these, 4 are blades with a mushroom for holding the knife guide arms and 1 is an end blade. The pitch of the blades is 76mm from blade center to blade center. The knife is delivered complete with the riveted bottom cutter head. Suitable for Busatis rear and side mower BM 1102.DME 1822 B, 18 blades GB 2730, 4 mushroom blades, 1 end blade GB2632, cutter head GB 2742, 5470.055.51 = 265.5960

Clearance disc complete with bearing suitable for all Busatis front mowers. The hole for the mount has a diameter of 25mm. There are 2 bearings 6005 RS installed.

DME 1506 B, 17 blades GB 2730, 3 mushroom blades, 1 end blade GB 2632, 1 bedknife head GB 2742, 5470.055.41 = 265.0070

DME 1822 A, 18 blades GB 2730.4 mushroom blades, knife head GB 2741, 5460.055.51 = 262.5960

DME 1506 A, 16 blades GB 2730, 4 mushroom blades, 1 upper cutter head GB 2741, 5460.055.43 = 262.5940

Carrier pin suitable for Agria for attaching the cutter bar to the power tool.

Suitable for Reform Type RM58, 158, 110, 111, 111S, 112, 115, 116, 131, 316.

Suitable for Steyr T80-180 with cleaning plates.

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Suitable for AEBI Type A71, A73, A81, AM9, AM20.

Suitable for type RM58, 158, 110, 111, 111S, 112, 131.

Suitable for AEBI Type A33, A35, A41 center section.