Actions

Design according to DIN 895, ISO 3318, ISO 1085. Jaw position 15. Chrome vanadium steel. Surface matt satin chrome plated. In the holder.Contents: 6x7.8x9.10x11.12x13.14x15.16x17.18x19.20x22.21x23.24x26.25x28.27x32 mm.

Padded shoulder strap for comfortable and back-friendly weight distribution, quick release hook with large base.

Replacement drawer for the Europa laying nest (middle model, top and bottom). Wooden frame with wire mesh base. Dimensions: (L x W) 89 x 41 cm

complete with seal, suitable for fair number 14234

​B-grade item, pump is used but fully functional and in good condition.Compact and robust wastewater pump with an oil-filled submersible motor, 0.55 kW/230 volts. Maximum flow rate: 230 L/min, maximum delivery head: 8 m, 5/4" female thread connection.Dimensions: Height only 410 mm, diameter 245 mm.Thanks to its special level controller and compact design, it is ideal for wastewater shafts in confined spaces, e.g., cleaning milking parlors, seepage pits at drive-over silos, etc. Float switch activation range: min. 10 cm, max. 20 cm.

Ground HSS twist drills with high cutting performance and long service life. Contents: yes10 pieces 1/1.5/2/2.5/3/3.5/4/4.5/5/5.5/6/6.5/7/7.5 and 8mm as well as 5 pieces each 8.5/ 9/ 9.5/ and 10mm

​Professional SDS-Plus 4-cutter drill bit for hard or reinforced concrete.Contents: 5/6/6 x 115 mm, 6/6/8/8/8/10/12 x 165 mm in a PACKOUT-compatible cartridge.

​Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.19-piece set with drill bits from 1.0 to 10.0 mm in 0.5 mm increments.

​Newly developed HSS metal drill bits for steel, alloyed heat-treatable steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure hold in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean work.25-piece set with drill bits from 1.0 to 13.0 mm in 0.5 mm increments.

​Newly developed HSS metal drill bits for steel, alloyed heat-treated steels up to 1300 N/mm², cast iron, aluminum, brass, etc.Thanks to the new stepless drill tip, effortless drilling starts on any material surface.Fast drilling progress with minimal effort.Triple shank for a secure grip in the drill chuck.Naturally, in proven Alpen professional quality for long service life and clean results.6-piece set, containing one drill bit each in 2, 3, 4, 5, 6, and 8 mm sizes.

Professional HSS twist drill in a ground design for a long service life and optimal drilling performance. Metal cassette equipped with drill bits from 1.0 - 10.0mm with a pitch of 0.5mm.

High-quality HSS cobalt drill bits for use when drilling high-quality steels up to a strength of 800N/mm2, e.g. stainless steel. Metal cassette from 1.0 to 10.0mm, pitch 0.5mm.

High quality HSS cobalt drill bits for use in high quality steel such as stainless steel. Metal cassette with drill 1.0-13.0mm in 0.5mm pitch

Professional HSS twist drill in ground design for a long service life and optimal drilling results. Metal cassette with drill 1.0 - 13.0mm in 0.5mm pitch.

High-quality HSS drill set for universal use in alloyed and unalloyed steel. Sizes 1.0 - 10.0mm in 0.5mm pitch.

High-quality HSS drill bits from 1.0-13mm with a pitch of 0.5mm for universal use in machining alloyed and unalloyed steel.

Industrial HSS-Cobalt twist drill for machining alloyed and unalloyed steel as well as rust- and acid-resistant steels. Increasing in 0.5mm increments from 1.0 to 13.0mm. In metal cassette

Terrax drill cassette with rolled HSS twist drills in 0.5mm increments from 1.00 - 10.00mm. Stored in a sturdy metal cassette.

HSS Co drill, ground, cylindrical with 135 cross ground, bronze surface in a practical metal cassette. Suitable for drilling in steel, stainless steel, cast steel, non-ferrous metals, plastics and special alloys. Up to 1100 N/mm tensile strength. Contents: 1-10 x 0.5 mm

Practical range of drill bits, equipped with drill bits in HSS-G quality. Ground design, cylindrical with 135 cross grinding and bright surface. Ideal for drilling in steel and cast steel, alloyed and unalloyed, gray cast iron, malleable cast iron, nodular cast iron, sintered iron, nickel silver, graphite, non-ferrous metals and plastics.Delivered in a robust metal cassette.in 0.5mm increments< /li>

High-quality twist drills in 0.5mm increments from 1.0mm - 13.0mm increasing. Stored in a sturdy sheet steel cassette.

Roll-rolled HSS twist drills 4241 in a practical metal cassette. Contents: 10 pieces each 1 / 1.5 / 2 / 2.5 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 and 8 mm. 5 pieces each 8.5 / 9 / 9.5 and 10 mm.