Special pliers & accessories

​Suitable for blind rivets, blind rivet nuts and for sheet metal nibblingwith 2 sheet metal nibbler insertsIncludes 5 interchangeable nose pieces and 6 interchangeable rivet nut pulling mandrelsNo tools required to change the nose pieceslittle effort required thanks to innovative lever technologynarrow pliers headwith rubber handleBody made from special tool steelBlind rivets aluminum: 2.4 - 3.2 - 4.0 - 4.8 - 6.4 mmSteel blind rivets: 2.4 - 3.2 - 4.0 - 4.8 mmRivet nuts: M3 - M4 - M5 - M6 - M8 - M10

These pliers are needed for a straight cut for ropes and bowdens without them becoming unraveled or crushed. With locking mechanism.To unlock, press the pliers handles together and release them. In order to maintain the cutting performance, it is not recommended to use the cutter for other purposes!

A 150-piece assortment with threaded rivets made of steel M3X9-M10x21 in a sturdy plastic case

A 150-piece assortment with threaded rivets made of aluminum M3x9-M10x21 in a sturdy plastic case

A 300-piece assortment with threaded rivets made of steel / aluminum M3X9-M10x21 in a sturdy plastic case

suitable for rivets made of aluminum, copper and steel, diameters of 2.4 - 3.2 - 4.0 and 4.8mm

35 pieces for material thickness 1 - 3, 35 pieces for material thickness 3 - 6, 30 pieces for material thickness 6 - 9.

Rivet made of aluminum with steel rivet mandrel and predetermined breaking mandrel.For universal use, suitable for standard riveting pliers.Large head

​Robust pipe and water pump pliers for pipes up to 4 1/2 inches.Clamping range 120 mm – adjustable to the workpiece in seconds with a push button.Self-locking, HRC61-forged and hardened teeth for a secure grip.Overall length 560 mm, handle with plastic coating for a good grip during heavy-duty use.

German product, straight, length 275 mm.

for punching test badgesgalvanized

Pressing pliers set with automatic ratchet and adjustable locking device and pressure point releasecomplete with two interchangeable pressing profile inserts for:insulated cable lugs from 0.5 - 6mm with symmetrical oval pressing (red-blue-yellow)not Insulated cable lugs from 1.5 - 10mm with mandrel pressing Complete set with 1,000 different cable lugs, delivered in an impact- and acid-resistant case.

Multifunctional tool (also called farmer's pliers), essential when building fences. Can be used as pliers, hammer, eyelet remover, wire cutter...Cuts wire up to 5mm . With rubber-coated handles, making them non-slip. Length of the pliers: approx. 27cm, color of the handles: red

to be used with upholstery ring / fence ring pliers | 185 mm Faie no. 126735practical helper for wire fence assemblyfor connecting fences, breeding cages and wire mesh nettingpliers magazine with 50 C-shaped wire rings eachMaterial: iron wireRing size: 11/16”

Professional brand pliers for pressing wire end sleeves from 0.25 - 16 mm, length 180 mm, handle with plastic cover.

Practical set with 3 grip pliers 125, 180 &~ 250mm, as well as 150mm long jaw pliers. Delivered in a storage roll bag.

with wire cutter with adjusting screw and quick release lever with special jaw for secure gripping, tensioning and holding head made of high-quality chrome vanadium steel forged Other technical properties Total length MV: 225 mm / 10"~

​The new and improved Gripple collet not only tensions the wire, but also regulates the applied load for consistently reproducible results and thus maximum wire service life.Gripple collet enables wires up to 400 kg to be tensioned, thanks to the 6:1 conversion of the tensioning mechanismCan be used for fence wires, trellis wires and anchoring ropes with a diameter of up to 6 mmMeasuring range: 100 - 300 kgEase of use and low weight make it easy to work with, even with multiple usesIdeal for use in the areas of pasture fencing as well as vegetable and fruit cultivation

Hardened and tempered professional pliers with a length of 280mm. Ideal for tough use on the construction site.

For clamping and tensioning profile, round and flat material. Longitudinal serrated gripping surfaces, with adjustment screw and release lever. One-handed operation. Chrome plated surface. Chrome vanadium steel.Contents: 7", 10", 12".

Revolutionary universal pliers for holding, gripping, cutting, stripping and crimping. Professional version with 2-component handle.

VDE insulated, up to 1000 V with cutting edge 40 curved jaws manufactured in accordance with DIN EN/IEC 60900, individually tested special tool steel, forged, oil-hardened and tempered cutting edges additionally inductively hardened to 60 HRC serrated gripping surface Chrome-plated pliers with multi-component sleeves Other technical properties Jaw design: flat round Material: special tool steel

Induction hardened cutting edges. 2-component handles, hand-friendly power transmission, chrome vanadium steel.Contents:Combination pliers 180 mmSide cutters 160 mmNose nose pliers, straight 200 mm< /li>

Universal pliers, 6-way adjustable, ideal for both hard and precise use! Size 10" or 254mm lengthAccording to DIN ISO 8976 Form BSlim head shapeWith applied, forged double-groove sliding joint and toothed recess Staggered gripping surfaces, self-clamping on nuts and pipes With clamp protection Suitable for pipes up to 1.1/2" and nuts up to SW 38 mm GEDORE chrome vanadium special steel, chrome-plated Teeth inductively hardened Design C = slim handle shanks with forged fluting Design JC = chrome-plated, with 2 -Component grip covers