Bite nipples & drinking troughs

​Brass adjusting screw, compatible with Lister ST7 bite drinkerLister original spare part number 09-0105010 (No. 10 on the spare parts diagram)

​For fattening pigs weighing 15-120 kgThe stainless steel feed intake mechanism simulates the animals' natural rooting behaviorMade of high-strength polypropyleneFeed flap and bite guard made of stainless steelEasy to use and easy to cleanCapacity: 60 litersPrecise feed dosing with 13 adjustment optionsIdeal for roughage feedingWater supply can be installed on both sides (1/2" external thread connection)Nipple drinker easily accessible even for small pigletsThe wet/dry system stimulates appetiteHeight: 107 cm, Diameter: 37 cm

Stainless steel version with brass threaded piece. The original AquaGlobe teething nipples are characterized by the following advantages: up to 40% less water wastage hygienic anatomically shaped excellent quality and durability should be installed horizontally (at the level of the snout) or inclined by 15Size: for sows or cattle up to 300 kg, length 97 mm, connection 3/4"-3/4" Less water wasted: The animal has to put the entire drinker in its mouth to activate the ball valve. This prevents the water play that occurs with conventional nipples. Because you use less water, you also save costs for manure storage and recycling. Hygienic: There are no nooks and crannies where bacteria could collect. In addition, the ball cleans itself through the rotating movement. AquaGlobe guarantees maximum hygiene. Anatomical shape: The special shape of the teething nipples (round with a flattened water opening) and the use of a movable ball as a valve and its placement make it easier for the animal to drink.

​Brass bearing screw, compatible with Lister ST7 bite watererLister original spare part number 09-0105003 (No. 3 on the spare parts diagram)

Bite drinker with 1/2" thread and 3/4" nipple for fattening and sows. The drinker has an adjustable nozzle of 0.8 - 1 - 2 mm for high or low pressure. Total length approx. 81mm, pressure cone 7.8mm, front drinking 25mm. Completely made of stainless steel!

Round teething drinker for sows, fattening and runners, made of stainless steel. Connection and nipple1/2". Adjustable nozzle of 0.8, 1, or 2 mm for high or low pressure.

Bite drinker for sows and fattening, made of stainless steel. Connection and nipple3/4". Adjustable nozzle of 0.8, 1, or 2 mm for high or low pressure. Total length 81 mm, pressure cone 7.8 mm.

Teething drinker with3/8" thread and nipplefor piglets and runners. Completely made of stainless steel!

The plastic drinking bowl SB 510 K is equipped with a pendulum valve and is particularly suitable for piglets and runners.Technical data:Width: 100 mm Projection: 87 mmHole spacing: 76 mmConnection: R "~ External threadWater output: approx. 2.8 l/min. at 5 bar Weight: 0.6 kg

​Gunmetal pressure tongue, compatible with Lister ST7 bite drinkerLister original spare part number 09-0097002 (No. 2 on the spare parts diagram)

​M4 brass nut, compatible with Lister ST7 bite drinkers.Lister original spare part number 9004000034061 (No. 8 on the parts diagram)

​Rubber seal, compatible with Lister ST7 bite drinkerLister original spare part number 09-0105009 (No. 9 on the parts diagram)

​Stainless steel feeding bowl for piglets in the farrowing pen. 25 cm in diameter.With tension hooks for attachment to all standard slatted floors.

Made of full stainless steel with 1/2" IT connection. Suitable for piglets up to 15 kg. Ideal for learning as the water collects at the front edge of the pool. Valve runs very smoothly and is easy to reach. H x W: 120 x 110 mm

​TR-5 plastic automatic feeder for piglets.Convenient, precise feed control in 12 positions, even with a full hopper.The internal scraper system allows for ideal feed dosing or even complete shutoff.With stainless steel bite protection edge.Hygienic and easy to clean, as there are no corners where feed can get trapped.Dimensions: 80.5 x 30 x 70 cm (L x D x H)

With this pool there is hardly any water loss because the water collects in the right side of the pool. Suitable for fattening. Fully stainless steel with 1/2" IT connection. H x W: 309 x 202 mm

suitable for order no. 126970 + 126971

​M4x35mm stainless steel screw, compatible with Lister ST7 bite watererLister original spare part number 9004003301081 (No. 11 on the spare parts diagram)

​Stainless steel M4 locking nut, compatible with Lister ST7 bite waterer.Lister original spare part number 9004000047081 (No. 12 on the spare parts diagram)

Brass drinking nipples for bulls, sows and fattening pigs. Water flow can be regulated!Projection: 97 mmConnection: external threadWater output: 2.3 l/min at 5 barWeight: approx. 385 g

Tipping trough suitable for WaterLevel valve. With fittings.

Drinking nipple for pig feeders. Suitable for piglets and fattening. 1/2" FEMALE THREAD. Total length 93 mm. Pin Ø 11 mm. For detailed drawing see downloads.

Drinking nipple for pig feeders. Suitable for piglets and fattening. 1/2" FEMALE THREAD. Total length 80 mm. Pin Ø 7.8 mm. For detailed drawing see downloads.

?Trough sprayer with slot. 1/2" AG. Water delivery: at 1 bar 3.5 l/min at 2 bar 6.2 l/min at 3 bar 7.2 l/min at 8 bar 8.0 l/min