Ibc range

Screw cap 3", suitable for large IBC tapsConnection to the IBC: S100x8 (DN80) IT - coarseMeasured diameter: 90-100mmThe closure of the outlet valve on the IBC is referred to as the screw cap.< /em>In most cases, IBC's are equipped with a 2" coarse thread (S60x6 DN50) screw cap. However, since there are a large number of diameter and thread combinations on the market It is important to measure the old cover or the existing tap (outlet valve) exactly. Basically there are coarse and fine thread variants, with the most commonly used size being 2" coarse thread.< /em>If a larger dimension is installed at the outlet of the tap, this corresponds to a 3" coarse thread in almost all cases.You can find the exact size information in the "measured diameter" dimension.< /em>

In addition to the IBC tap, the lid is the most wanted accessory item for the containers..The existing sizes are DN150, DN225 and DN400mm. The size DN150 is installed as standard for IBC tanks.Larger diameters such as 225mm are a special size.With vent valve.Connection to the IBC: S165x6 (DN150 ) IG CoarseMeasured diameter: 155-164mm

Closed IBC lid without ventilation.In addition to the IBC tap, the lid is the most wanted accessory item for the containers. The existing sizes are DN150, DN225 and DN400mm The size DN150 is installed as standard for IBC tanks.Larger diameters such as 225mm are a special size. Connection to the IBC: S245x6 (DN225) IT RoughMeasured diameter: 235-245mm

Spacer, outlet extension with a length of approx. 11cm.2" on both sides - ideal problem solver for straight extensions.Connection to the IBC: S60x6 (DN50) IT - CoarseOutlet: S60x6 (DN50) AG - CoarseMeasured diameter: 55-62mm

Plastic tank made of high-quality UV-stabilized HDPE with a capacity of 1,000 l. The inner container is enclosed by a sturdy frame made of galvanized tubular steel. Easy transportation and safe standing thanks to installation on a plastic pallet that can be driven under (e.g. pallet truck). The tank is stackable, suitable for foodstuffs and is supplied complete with DN 225 lid and 2" outlet tap. Dimensions: W x H x D 1000 x 1180 x 1200 mm, Net weight approx. 52 kg.

This G1" bushing does not have to be countered from the inside and can therefore also be attached to inaccessible places. Required drill hole 43mm, outlet thread 1" AG fine

Tank bushing with outgoing IBC thread S60x6, which allows any additional IBC adapters to be attached.The opposite side has a G2" fine thread including seals and lock nut.Even without the lock nut, many different screw connections can be made with this adapter from G2" to S60x6 (e.g. screwing into IBC cover).

Ideal set for connecting 2 IBC tanks, consisting of:2x Camlock male part2x Camlock female coupling 38mm1x T-piece (DN40mm)3x pipe section (DN40mm)1x hose (DN40mm ), length 2m6x hose clampConnection to IBC: S60x6 (DN50) IT - coarseOutlet: hose, 40mm (DN40)Measured diameter: 55-62mm

​Use this practical connection set and the matching accessories to connect several IBCs togetherSet for quick connection of 2 IBC outletsCan be installed without tools Kit consisting of:2 adapters, 2“ coarse female thread to 1” fine male thread1 T-piece with anti-twist protection, 1"1 hose connector each, 1“ straight and 1” angled (90°)1.2 meters of DN 25 hose1 drain tap, 1"1 stepped hose clamp with connection option for 0.75“ / 1” and 1.25"

For screw connection on both sides of IBC water tanks with 1" fine external thread).

Adapter with small stopcock, suitable for the direct connection of " (approx. 13mm) hoses.Connection to IBC: S60x6 (DN50) female thread - coarseMeasured diameter: 55-62mm

IBC cover or sleeve to protect the contents against short-term temperature fluctuations and temperature peaks. ~Ideal for the transport of temperature-sensitive goods in IBC tanks.The metallized (AL) Film is extremely robust and offers the following advantages:Reflection of sunlight up to 97%Reduces air exchangeReduces short-term temperature fluctuations - extreme heat or Cold High quality with fabric sewn edges - not gluedLid opening removable with Velcro fastener - suitable up to DN 225 mmValve opening removable with Velcro fastenerThe entire front can be folded up using Velcro fasteners on the sides.Attention: ~NOT permanently UV-resistant!!!!It This is a consumable item!!!Only for transport and short-term storage. ~

This film is suitable for all standard 1000l IBC tanks.They offer excellent protection against UV radiation and allow the tank to be used to its full extent. Matching cutouts ensure accessibility on the front and back of the tank. It is also possible to remove contents using a precisely fitting tab. Ideal protection against algae formation, cloudiness and brittleness - save yourself time-consuming cleaning work and protect the tank from sunlight!

Original replacement tap for WERIT containers.This is mounted on the tank using a clamping ring and closes with the help of a sliding valve.Connection to the IBC: clamping ring 85mm (DN50)Outlet: S60x6 (DN50) AG Coarse

Y-adapter with click system (Gardena) and IBC connection adapter S60x6.Separately lockable outlets with " thread, including click system adapter.Variant with fixed nutConnection to the IBC: S60x6 (DN50) female thread - coarse Outlet: Click system ITMeasured diameter: 55-62mm

Standard adapter from S60x6 (2", DN50) to fine thread (IG) with suitable GEKA coupling (AG)Connection to IBC: S60x6 (DN50) IT - coarseOutlet: GEKA couplingMeasured diameter: 55 -62mm

Plastic drinking bowl with float valve for connection to IBC tanks. Animal-friendly drinker without pressure tongue, very robust and bite-proof. Encapsulated brass float, protected from dirt. Complete with hose connection, steel mesh hose and galvanized mounting plate, for low pressure, mit drain plug for easy cleaning. Width: 240 mm, projection: 340 mm, adapter nominal width: 50 mm, weight: approx. 1.1 kg, < strong>Water barrel connection: IBC tank S 60 internal thread

Suitable for a wide range of canister, barrel and IBC threads. Thread DIN45, flow 5 L/min.

Suitable for a wide range of canister, barrel and IBC threads. Thread DIN50, flow 5 L/min.

Suitable for a wide range of canister, barrel and IBC threads. Thread DIN63, flow 5 L/min.

Screw cap with 225mm diameter with 2?IG fine thread in the middle. Fits most barrel pumps.

Suitable for a wide range of canister, barrel and IBC threads. Thread DIN40, flow 1.5 L/min.