Adblue, lubricant, universal pumps

​AD Blue pump with 34L/min output. Practical electric pump with 230 volt motor. Complete on console with 8m 3/4” hose, all necessary connections and manual nozzle.

Electric Ad Blue pump with 230 volt and 34 l/min flow rate. Complete incl. 8m 3/4” hose and automatic nozzle. Mounted on a practical wall bracket.

Automatic fuel nozzle, suitable for urea AdBlue. Includes swivel joint, plastic/stainless steel gun. Connection nozzle DN19.

Ideal for universal use. Universal pump with approx. 40 l/min. Output at 3400 rpm. Delivery height max. 20m Hose connection 3/4"Self-priming after filling

Cost-effective entry-level solution Low-wear centrifugal pump Electric motor 12 V, max. 20 A Self-priming as a submersible pump on the bottom of the container User-friendly, compact, lightweight designVolume flow approx. 25 l/min with nozzle and 4 m hoseExternal dimensions of the pump: length 160 mm, 56 mm

Charger L2830MS for DT-Mobil Easy 460l and 600l. 220 - 240 VAC, 3A charging current. Charging time approx. 1.5 hours with temperature control and diagnostic function.

The new benchmark as a crank pumpSolid construction for professional operationHousing made of stainless steel and technopolymerBarrel adapter with connection thread S56x4Multi-part suction pipe 1 m , can be shortened individuallyPVC dispensing hose 3 mStainless steel outlet pipe 19 mm with protective capFlow rate 0.38 l/stroke

Digital liter counter, calibratable, measuring range 10-120 L/min., 5-digit display, 6-digit total quantity, 1" external thread on both sides, incl. sleeve.

Output 50 L/min., suction height 4 m, pressure 5 bar, maximum speed 3400 rpm, temperature suitability max. 50C, clamping shaft 8 mm, connection 3/4" male thread, self-priming. Not suitable for aggressive liquids and diesel .

Output 45 L/min., suction height 4 m, pressure 5 bar, maximum speed 3400 rpm, temperature suitability max. 50C, clamping shaft 8 mm, hose connection 15 mm suitable for 1/2"~ Hose, self-priming.

Self-priming pump suitable for every drill.Power 25 L/min., suction height 4 m, pressure 5 bar, speed maximum 2600 rpm, temperature suitability max. 50C, clamping shaft 6 mm, hose connection 15 mm suitable for 1 /2?hose

Practical drill pump made of stainless steel, food-safe and self-priming (after filling) thanks to impeller technology.Ideal for:Wine< li>MustSalt and fresh waterMilkOilsas well as liquids whose viscosity does not exceed 30 centistokes or more than 4 degrees Engler. ~However, the liquid should contain no or only very small solids. ~Technical data: ~ Power: 1500l / hour Hose connection: 3/4" ~Speed max: 2850 rpm ~< li>Delivery height max.: 24 m ~Town weight: 1.5 kg

incl. Automatic fuel nozzle 30l/minPump set for pumping urea solutions AUS 32 from barrels and small tanks. Diaphragm pump with 30l/min output, 230V, self-priming, dispensing hose 6m, stainless steel console, complete with suction hose 0.5m &~ Suction pipe, but without SEC coupling.

Practical flow meter for urea AUS32. With 180 rotatable digital display and a delivery rate of 10-150 liters per minute. With four-digit display plus two decimal places. With 1 inch internal thread on both sides for connection. Suitable for urea (AUS32, AdBlue) and water. The counter shows the capacity of the battery at the touch of a button, liter and galleon display can be switched.Technical data: Flow min /max: 10 /150 l/min Maximum pressure: 3.5bar Max. temperature +/-: -10C - +60C Degree of protection: IP55 Not for gas, Suitable for alcohol, petrol or diesel!

Digital flow meter for AdBlue pump systems made of plastic. For flow 6-100l/min, connection 1" external thread with 90 elbow. For direct connection to the pump.

This compact and robust ATEX vane pump was specially developed for the safe operation of potentially explosive areas. This pump enables easy refueling or pumping of liquids such as gasoline, gasoline mixtures, diesel. Thanks to its compact dimensions and drive via a 12V DC motor, this pump can be used quickly. The pump has a 5m long cable with alligator clips and integrated switch. Technical data: flow rate max. 32 L/min, working pressure 0.8 bar, connections: 3/4" IT.

Hand nozzle made of plastic, housing made of PP, valve made of stainless steel, seal made of Viton, connecting nozzle DN 19, outlet piece made of stainless steel 19 mm. (suitable for Faie No. 21740)

Practical 12V pump for suctioning or transferring small amounts of liquids such as oils or diesel. Output approx. 1.5 L/min. Self-priming pump making it ideal for changing oil. Complete with suction lance and hoses.

High-quality hose with high flexibility made of EPDM. DN 19mm = 3/4?, ideal for AdBlue, for example. Price per meter

for 1" hose bent - 90 degrees

Practical hose reel in INOX version with 8m hose length, inner diameter ".For AdBlue (urea solution AUS32). Easy installation in several variants thanks to screwable plates. With auto stop system for unrolling the appropriate length, seals made of Viton &~ Teflon. Connection thread 1" male.Not suitable for diesel, alcohol, petrol or kerosene!

High-quality diaphragm pump with 30l/min delivery rate, self-priming. Dispensing hose 6m with automatic nozzle.With universal console for IBCs. With suction hose 1.5m with SEC coupling. Ideal compact system for filling up with AdBlue. Connection 230V.

The practical solution for refueling vehicles when used on construction sites or in the field! Urea solution is not a hazardous substance. No ADR approval is required for transport.Single-walled container made of polyethylene approved for AdBlueBelt guide for transport securityIntegrated forklift pocketsIntegrated carrying handlesCematic Blue diaphragm pump approx. 30l/min.4m dispensing hose DN 19Automatic dispensing valveDimensions (LxWxH) : 80x60x59 cmWeight: 23 kg

​The practical solution for refueling AdBlue. No ADR approval necessary. complete system with 12V with submersible pump CENTRI SP 30, with automatic nozzlesingle-walled tank made of polyethylene approved for AdBluebelt guides for transport safetyintegrated forklift pocketsintegrated carrying handlesSubmersible pump CENTRI SP 30, 12 V approx. 25 l/min, 4 m connection cable with pole clampsdispensing hose 4 mautomatic nozzle