Beverage bottling

BAG IN BOX - The better solution!The laborious filling of bottles is now a thing of the past.Highest efficiency and quality.The bags are also suitable for hot filling approx. 80C.Your homemade delicacies are optimally stored in the practical cardboard box.In addition, the liquids can be easily removed!Filling:Suitable for liquids up to approx. 80C.However, be careful when filling hot liquids as the plastic becomes softer when warm.Store containers that are still hot with the cap facing upwards and do not close the boxes straight away. This allows the filled bags to cool down better.Seal:Press the remaining air out of the bag as much as possible, then press the seal in well.Be careful with the still hot foil, this can be easily damaged if exposed to sharp objects.Store:The bags should be as dark as possible at a temperature of approx. 5C - 25C Store, if possible standing up:Removing:The liquid is removed from the horizontal box. The drip-free Vitop closure ensures clean and practical removal. Before the first withdrawal, remove the tear-off fastener on the tap. Press the side levers up at the same time and you can enjoy your delicacies.

Manual bag in box filling system for bags from 1 to 20 liters. Also suitable for filling glass bottles with juice, wine and other liquids. Completely made of stainless steel. Practical clamp holder and locking lever for bag in box bags. The battery-operated food-safe flow meter enables filling with an accuracy of 1% and is equipped with a reset or calibration function. Simply pressing the button resets the dispensed amount to start a new filling. Filling is done using gravity or a pump (not included). Handy filling gun made of stainless steel. Technical data:Size filling plate: 650 x 600mm Flow meter: 10-120 l / min Maximum liquid temperature: 85 C. Minimum pressure: 0.3 bar Maximum pressure: 15 bar Dimensions: 600x650x500mmWeight: 20 kgAttention: Delivery without hoses. Please order the desired length separately.

The BAG in BOX packaging system consists of an outer box and a bag with a VITOP dispenser. Ideal for storing fruit and vegetable juices, wine... also suitable for hot filling up to 80C. Long shelf life as atmospheric oxygen is prevented from entering.The fruit juice is packaged in a flexible bag that acts as an oxygen barrier and is itself in a cardboard packaging. Protected from light and oxygen, the nutritional benefits and aroma of the fruit juice remain fresh for several months. The bag consists of several inner films and an outer film with an oxygen barrier. The appetizing, break-proof Vitop tap makes pouring by the glass possible and at the same time prevents air from entering the bag.Juice is made sterile using heat treatment. If unopened, the juice will last for several months (approx. 6 months to 1 year). After opening the BAG in BOX and storing it in a cool place, the contents will last for another 3 weeks.

The BAG in BOX packaging system consists of an outer box and a bag with a VITOP dispenser. Ideal for storing fruit and vegetable juices, wine... also suitable for hot filling up to 80C. Long shelf life as atmospheric oxygen is prevented from entering.The fruit juice is packaged in a flexible bag that acts as an oxygen barrier and is itself in a cardboard packaging. Protected from light and oxygen, the nutritional benefits and the aroma of the fruit juice remain fresh for several months. The bag consists of several inner films and an outer film with an oxygen barrier. The aspetic, break-proof Vitop tap makes pouring by the glass possible and at the same time prevents air from entering the bag.Juice is made sterile using heat treatment. If unopened, the juice will last for several months (approx. 6 months to 1 year). After opening the BAG in BOX and storing it in a cool place, the contents will last for another 3 weeks.

The BAG in BOX packaging system consists of an outer box and a bag with a VITOP dispenser. Ideal for storing fruit and vegetable juices, wine... also suitable for hot filling up to 80C. Long shelf life as atmospheric oxygen is prevented from entering.The fruit juice is packaged in a flexible bag that acts as an oxygen barrier and is itself in a cardboard packaging. Protected from light and oxygen, the nutritional benefits and the aroma of the fruit juice remain fresh for several months. The bag consists of several inner films and an outer film with an oxygen barrier. The aspetic, break-proof Vitop tap makes pouring by the glass possible and at the same time prevents air from entering the bag.Juice is made sterile using heat treatment. If unopened, the juice will last for several months (approx. 6 months to 1 year). After opening the BAG in BOX and storing it in a cool place, the contents will last for another 3 weeks.

With float valve that automatically regulates the inflow. Container capacity approx. 5 liters, filling tube 12 mm, hose connection 3/4?. Table model for dosed filling of must, wine, fruit juices, etc. Not suitable for syrup. WxHxD: 38x50x45 cm.

for bottles, heating coil 230 V, 50 Hz, 1.5 m connection cable, dimensions LxWxH: 42x18x21 cm. Bottle support is height-adjustable and can be fixed with two screws

Pack of 100.Suitable for pasteurization and hot filling!

?Equipped with professional sockets for crown caps with a diameter of 26/29 mm.The machine can be used to apply plastic champagne corks and, when using a special device (SE1.026.10), also for oil caps with pre-threads can be used.The power supply is 230 V.

With this pump for already filtered liquids such as: E.g. juice, must or wine, you save yourself the hassle of decanting by hand. The completely food-safe pump has an output of up to 100 l per hour.Technical data230 V, 50 Hz, 70 WIncl. 80 cm suction hose 12 mm with foot valve and 130 cm delivery hose 10 mmNot suitable for liquor and vinegar!!!!

With stopcock.

With automatic tap. No overflow. Tapping the lid will fill it again. Riser pipe height approx. 70 cm.

Practical help for filling bags into box bags. Suitable for bag sizes 3, 5, 10 and 20 liters. The holder is designed so that the bag cannot slip out. The holes allow for fastening to prevent slipping when filling. 100 x 100 x 103 mm, material thickness 2.5 mm.

Electric table filler for up to 250 bottles/hour. Suitable for wine, must, juice, beer, oil, etc. Adjustable filling level and speed. The negative pressure system ensures clean filling without backflow. Suitable for bottles with an opening of 16 - 28 mm and a height of 250 - 330 mm. Technical data:- approx. 200 x 400 x 400 mm- weight 4 kg- 230V - 50/60Hz

Diameter 115mm, height 200mm

For natural corks up to max. 25 mm. Cork pusher is adjustable.

​Milk & Juice Bottles – practical, sustainable, stylish.  Our high-quality bottles are perfect for milk, juices, smoothies, or water. They are taste-neutral, easy to clean, and reusable – ideal for home, catering, or on the go. Thanks to their durable material, your drinks stay fresh and flavorful for a long time.  Lids are not included.

xH: 31x55 mm, 100 pieces

Stand-up pouches with an integrated dispenser tap offer a modern and eco-friendly packaging solution for a variety of liquids. Thanks to the practical Vitop tap with a tamper-evident seal, contents can be dispensed easily and cleanly without air entering.Product Features: Versatile: Suitable for wine, cocktails, juices, dairy products, water, oils, or hygiene products. Hot-fill capable: Suitable for liquids up to 100°C. User-friendly: Tap with tamper-evident seal for clean and controlled pouring. Efficient and space-saving: Low weight and volume compared to rigid containers – ideal for transport and storage. Sustainable: Reduced material usage, reusable, and recyclable.

Stand-up pouches with an integrated dispenser tap offer a modern and eco-friendly packaging solution for a variety of liquids. Thanks to the practical Vitop tap with a tamper-evident seal, contents can be dispensed easily and cleanly without air entering.Product Features: Versatile: Suitable for wine, cocktails, juices, dairy products, water, oils, or hygiene products. Hot-fill capable: Suitable for liquids up to 100°C. User-friendly: Tap with tamper-evident seal for clean and controlled pouring. Efficient and space-saving: Low weight and volume compared to rigid containers – ideal for transport and storage. Sustainable: Reduced material usage, reusable, and recyclable.

for bottle opening 26.5 mm, height adjustable, bottle height min. 10 cm, max. 36.5 cm, bottle max. 14 cm.

​Lid suitable for milk and juice bottles (133063, 133064)20 pieces per pack.