Installation requirements
Pushbutton (closer)
12/24 V - 150 W for wall thickness up to 8 mm with rubber cap, 2 screw terminals, switching position: 0-1, thread 22 mm
Raise/lower pressure switch (button)
Dust and water protected, especially suitable for tractors and construction machinery, flat connectors 6.3 mm, load 12 V, 20 A, max. 380 W, 4-pin
Remote thermometer for Steyr Plus
52 mm, 12 V
Remote thermometer transmitter
M14x1.5, for Steyr Plus
Reversing warning volume 90 dB(A)
12/24 V, 46x49 mm. Reversing warning systems make a significant contribution to road safety. Easy installation, e.g. in the cable for reversing lights! Pressure-waterproof, dirt-proof.
Rotary start switch
Suitable for Steyr T80, 70 mm, with pre-heating function, 4 connections
Spring battery cover
16.3 mm, 20 turns, for Steyr Plus
Start switch/ignition lock
Suitable for Steyr 80,... 55 mm, parking - O - ignition - pre-glow - startincludes 2 pieces. Start keys
Steering wheel cover cap
for Steyr PlusOuter diameter: 61mmInstallation diameter: 49mm
Stepping relay Wehrle 20/10A
Stepping relays are used where consumers are to be switched on or off using a switch/button, e.g. work lights, seat valves, directional control valves, etc.Ie, if a current is applied to terminal 15 (button pressed once), the relay switches on terminal 87 and holds itself - current on terminal 87 despite releasing the button! When you press the button (impulse) again, the relay switches off again and terminal 87 is de-energized - impulse switch or toggle flip-flop.In the rest position of the relay, terminal 87a is constantly supplied with power and is in one Changeover function with terminal 87.Connections: 30 directly from the battery, continuous positive 87 consumer 1 87a consumer 2, constantly supplied with power over 30 when the relay is in the rest position 31 ground15 of switch/button, switching current 87, 87a changeover function (alternating current on 87 &~ 87a)
Steyr 80 Series Instrument Panel
Instrument panel with 13 indicator lights / symbols
Switch-on relay 12 V - 20/30 A
The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function
Switch-on relay 24V 10/20A, Changer
The switch-on relay separates the working current from the switching current. This means that large working currents can be switched with relatively small control circuit currents. There is no direct contact between the control and working groups. The controls and wiring can therefore be kept small in the control circuit.Connections:30 directly from the battery87 consumers87a Consumer 2, rest position, constantly supplied with power via 3085 Ground86 of switch, switching current87, 87a changeover function
Tachometer with hour counter 12/24 V
Complete with connection cable set, 0-4000 rpm, Ø 80 mm, with adapter ring for 100 mm diameter.The signal for RPM measurement is supplied via terminal W from the alternator.10-32V analog LCD tachometer with stepper motor technology, 4000 rpm, white LED illumination, and an orange hour meter.Drilling template with 100.5 mm diameter, IP65 rated on the front.Operating temperature -20°C to +90°C.Programmable via two buttons on the back of the instrument.4-pin Molex Minifit Jr. connector.90 cm connection cable included.EMC: ISO 7637-2 ISO 2575Technical specifications:Rated voltage: 10-32 VDisplay type: analog - digitalWidth: 10 cmOperating temperature: -20° / +85° CScale: 0-4000 RPMBore diameter: 100 mm
Toggle switch
12 V/20 A, 24 V/15 A, 250 V/10 A, 3 flat plugs, installation opening 12.5 mm, sheet metal thickness max. 5 mm.Switching position: 1-0 -2, on/off/on latching
Toggle switch
12 V/20 A, 24 V/15 A, 250 V/10 A, 3 flat plugs, installation opening 12.5 mm, sheet metal thickness max. 5 mm. Switch position: 1-0-2 on/off/on momentary, spring return
Toggle switch (changer)
12/24 V - 120 W, for wall thickness up to 6 mm, 3 flat plugs, switching position: 1-0-2
Toggle switch (closer)
12/24 V - 120 W for wall thickness up to 6 mm, 2 flat plugs, switching position: 0-1.
Toggle switch 12/24 V - 120 W
With fastening nut, for wall thickness up to 2 mm, 3 screw connections, switching position: 1-0-2.
Tractor meter for Steyr Plus
80 mm version 30 km/h
Tractor meter shaft Steyr Plus 1700mm
L = 1700 mm, 2 x M18x1.5 mm
Tractor meter Steyr 80 series
80 mm, connection M18x1.5 mm, for 25, 30 and 40 km/h..
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.
