Vehicle electrics

​Includes: 1 x 7 inch digital wireless 4QUAD split HD monitor with audio and DVR function, 1 x digital wireless CMOS camera with microphone, 1 x detachable sun visor, 1 x adjustable bracket, 1 x manualMax. Max. number of cameras: 4 Maximum transmission distance: up to 70 mTemperature range: -20°C to +70°CNight visionCamera viewing angle: 120°Volt: 10-32V Technical data Resolution: 800 (RGB) x 480Recording function: YesFrame rate (FPS): PAL: 25, NTSC: 30Width: 177 mmColor coding: PAL/NTSCFrequency: 2.4GHzFunctions: 4 ways video inputBrightness: 450cd/㎡Height: 122 mmCamera IP rating: IP69KCamera viewing angle: 120° Camera type: CMOSConnectivity: Analog (CVBS)Contrast: 500:1Maximum number of cameras shown on screen: 4Maximum transmission distance: 70 m (under optimal conditions)Monitor size: 7''Monitor IP rating: IP54Monitor type: LCDNight vision: YesOptimum Transmitting Distances: up to 40mFits SD card format: Support maximum 128G SD cardQuad screen: YesLoop option: NoMirror function: YesDepth: 30 mmTouchscreen: NoConnection type: WirelessVolt (V): 10-32VCertification: CE, EMC, RoHS, E9, UKCA, RED

with screw connections

With lid, especially for Steyr Plus series, LxWxH: 120x45x30 mm.

3-pin Plug to 3-pin Double socketmax. 25A, cable length approx. 200mm

from 13-pin. Socket to 7-pin Plug

from 7-pin. Socket to 13-pin Plug

M18x1.5mm

10 ohms

fully insulated

fully insulated, with two cast inserts and ground strap

12 V/100 A, manual switch for switching + or - lines. Switching key can be removed in the off position, 2 connection screws for 8 mm cable lug, switching current 12/24 V = 100 A, switching current for short-term operation (5 seconds) 500 A.

Switch lever can be removed in the off position, 2 connection screws for 10 mm cable lug, 250 A, short-term operation (5 seconds) 2500 A.

Simple fixation using a double cable clamp, for cables up to 70 mm

For Steyr 80, M10x1.2 flat connector.

Closer, rest position "~Off"~

Switch for brake light or start safety 12/24V, 4 flat plugs,IP67, can be used instead of CNH: 82026949, 5163618, 47132449, Steyr: 321564850

PVC, 2 flat connectors, thread 12 mm, thread length 35 mm.

With rubber cover cap.

This brake light switch for the Steyr Plus series and Lindner operates as a normally closed contact and breaks the circuit when actuated. Hole spacing 23 mm, 2x flat plug connections. Advantages & Features • Normally closed function – the circuit is interrupted when the switch is actuated • 23 mm hole spacing – suitable for specific mounting positions • 2x flat plug connections – simple electrical connection Frequently Asked Questions Which vehicles is the switch suitable for? The brake light switch is designed for vehicles in the Steyr Plus series and Lindner. How does the switch work? In the neutral position, the circuit is open. When the switch is pressed, the circuit is closed. Translated with DeepL.com (free version)

2-pole with flat connectors

1-pole with screw connection, M18 mounting thread.

2-pole, with cover, installation opening 28 mm.