Vehicle and trailer identification

For vehicles that are only approved for certain roads (routes) in accordance with Section 39 Para A circular yellow plate with a diameter of at least 20 cm, a black border and the Latin letter R in permanently legible and erasable black writing must be clearly visible on each of the towing vehicle and the license plate attached to the rear of the last trailer. These boards make it possible to identify vehicles with restricted registration in accordance with Section 39 Paragraph 1 KFG, which makes it easier to monitor compliance with the prescribed route.

Required by law since January 1, 1993. To be used in place of the front number plate. 537x137mm

55mm x 5m, Grade 983, marked according to UN ECE R104 for fixed bodies.

318x186 mm, 12V, black plastic housing, clamp holder for rod 14-20 mm.

12V, fully wired with lighting, consisting of: 2 warning signs according to DIN 11030, retroreflective on one side with three-function light, 7-pin plug, with 2.20m intermediate cable and 7.50m main cable, screwable

2 lines, 300x200mm

single line, for cars, 520x120mm

white-red, fluorescent edge, with chain

Complete with curved mirror glass 210x138 mm black plastic, clamp with turntable for 10 mm rod, can be used for trucks, off-road vehicles, agricultural and construction machinery. (E-approved).

complete with rod 18 mm and fastening, black plastic housing, size: 230x175mm, rod length including bracket: 300mm

black plastic housing

Complete with curved mirror glass, also partially suitable for Steyr 900, black plastic housing, with clamp holder for rod 14-20 mm, size 318x186 mm

Main mirror 1009 with close-range mirror (blind spot), ABS plastic housing black, right/left, manually adjustable, length 382 mm, width: 232 mm, for rod 18-22 mm, MEKRA no.: 511009017099, suitable for: Class 26143870, Fendt G304810150020, Lindner 3010662, test mark E1 02165 

Main mirror 1009 with large close-range mirror (wide-angle mirror), black ABS plastic housing, left, manually adjustable, length 465 mm, width: 231 mm, for rod 18-22 mm, MEKRA no.: 511009021099, suitable for: Claas 26095630, Fendt G743810150010, Lindner 3010850, for tractors ISO 5721-2, test mark E1 021165

Main mirror 1009 with large close-range mirror (wide-angle mirror), black ABS plastic housing, right, manually adjustable, length 465 mm, width: 231 mm, for rod 18-22 mm, MEKRA no.: 511009022099, suitable for: Claas 26096000, Fendt G743810150020, Lindner 301085, for tractors ISO 5721-2, test mark E1 021165

Adjustment range 420-720 mm, mirror 235x180 mm, swiveling, for rod 14-20 mm, without mounting plate.

Complete with curved mirror glass, size 284x176mm, black plastic housing, rotating clamp for rod 14-22mm, suitable for e.g.: Kubota,...

Length 316 mm, width 230 mm, black plastic housing, for rod 18-22mmSuitable for Case: 3210-3230, 4210-4230, CS, CSPro, CVX series, CX50-100, Magnum 7210-7250, 8910-8950, Maxxum 5120-5150, 5220-5250, Deutz Agrotrac, Agrotron, Fendt: Favorit 500, 800, 900, Vario series, Lindner Geotrac 3 and 4 series, New Holland TVT and T7500, Same Diamond, Iron, Laser, Rubin, Silva, Steyr< /strong> 9000, 9100, CVT series

Length 305 mm, width 183 mm, black plastic housing, for Strange 18mmSuitable for Case Maxxum 5120-5150, C, CS, CVX series, Steyr 900, 9000 , 9100, CVT series, New Holland TVT series

Complete with curved mirror glass, mirror housing galvanized sheet steel with plastic coating, suitable for e.g.: Deutz, partly Steyr,... Clamp for rod 16-18 mm, size 310x220 mm.

235x180 mm, plastic housing, clamp and joint for 14 - 20 mm rod. Suitable for Steyr Kompakt series, Same, Landini, Reform.Also suitable for: ~Massey Ferguson: ~354 , 675, 690, 698, 698 T, 6993340, 3350, 33552205, 2210, 2220, 2225, 2230, 22352430, 2435, 24403425, 3435, 3455< br>Ford NewHolland:4635, 4835, 5635, 6635, 7635TL100, TL70, TL80, TL90TN55, TN65, TN70, TN75TL100 A, TL70 A, TL80 A, TL90 ATN95 ATN90 FFiat:45-66, 45-66 DT, 50-66, 50-66 DT , 55-66, 56-66, 60-66, 70-66, 80-6655-88, 55-88 DT, 60-88, 60-88 DT, 65-88, 65-88 DT, 70-88, 70-88 DT, 80-88, 80-88 DT100-90, 100-90 DT, 110-90, 110-90 DT, 115-90, 115-90 DT, 130-90 , 130-90 DT, 140-90, 140-90 DT, 160-90, 160-90DT,180-90, 180-90 DT, 55-90, 55-90 DT, 60-90, 60- 90 DT, 65-90, 65-90 DT, 70-90, 70-90 DT, 80-90, 80-90 DT, 85-90, 85-90 DT, ~90-90, 90- 90DT, 95-90, 95-90DT60-94, 60-94DT, 65-94, 65-94DT, 72-94, 72-94DT, 82-94, 82-94DT, 88-94, 88-94 DT580, 580 DT, 680, 680 DT, 780, 880 DT, 880-5 DT, 880, 980, 980 DT, 1180, 1180 DT, 780 DT, 1280, 1280 DT , 1380 DT 80, ~138 DT80, 138 DT DT, 1880 DT, 1880Landini:Ghibli 100, Ghibli 105, Ghibli 80, Ghibli 85, Ghibli 90 , Ghibli 95Globe 50, Globe 55, Globe 60, Globe 65, Globe 70, Globe 75, Globe 80Legend 115, Legend 130, Legend 145, Legend 160, Legend 165Vision 100, Vision 105, Vision 80, Vision 85, Vision 90, Vision 959550Globalfarm 100, Globalfarm 105, Globalfarm 90, Globalfarm 95Alpine 65, Alpine 75, Alpine 85Powerfarm 105, Powerfarm 60 , Powerfarm 75, Powerfarm 85, Powerfarm 95Mistral 40 America, Mistral 45 America, Mistral 50 America, Mistral 55 AmericaTrekker 100, Trekker 105, Trekker 70, Trekker 75, Trekker 80, Trekker 85, Trekker 90 , Trekker 95Same:Dorado 56, Dorado 60, Dorado 66, Dorado 70, Dorado 76, Dorado 86Explorer 70 II, Explorer 80 II, Explorer 90 II< br>Deutz: ~Agroplus 60, Agroplus 70, Agroplus 80Agrocompact F60, Agrocompact F70, Agrocompact F80, Agrocompact F90Agrokid 25, Agrokid 35, Agrokid 45< br>Renault/Claas:Dionis series: 110, 120, 130, 140Pale series: 210, 230 , 240800 Series: 851-4 SFructus Series: 110, 120, 130, 140Nectis Series: 217, 227, 237, 247, 257, 267Series 100: 103-52, 103-54, 106.54, 110-54, 120-54, 133-54, 145-54, 155-54Series ~ 70: ~ 70-12 F, 70-12 LB, 70-12 V, 70-14 F, 70-14 LB, 70-14 V50 Series: 55-12 F, 55-12 LB, 55-12V, 55-14 LB, 55-14VSeries 80: 80-12F, 80-12V, 80-14F, 80-14V

Complete with curved mirror glass suitable for e.g.: New Holland,... Black plastic housing rotating clamp for rod 14-20 mm, size 328x239 mm.

to mirror 37889

Width: 223mmLength: 313mm