Lights

Bright and safe for road trafficIt's over, brake and flashing lightThe light is clearly visible even in poor visibility and ensures a safe journey, has a long service life of up to 30,000 hours. It is therefore very low-maintenance and saves you money.The rear light is made of high-quality materials and has a robust construction. It is therefore resistant to shocks and mechanical damage, and is equipped with electrical protection against reverse polarity. This prevents a short circuit.3-function LED lampEuropean approval E9Approval for electromagnetic compatibility EMCLamp construction resistant to shocks and mechanical damageElectrical protection against reverse polarity Technical data:Functions: stop, brake and flashing lightOperating voltage: 12 /24 VProtection class: IP68Approval: E9, EMCMaterial: Plastic (PC)Dimensions: 120 x 90 x 30 mm

For Multipoint I, with contact sockets and 2 grommets, including assembly instructions.

Contents:1x H7 12V 55 W PX26d1x W5W 12V W2, 1x9.5d1x P21W 12V BA 15s1x R5W 12V BA 15s1x C5W 12V SV 8.5-8 1x P21/5W 12V BAY 15d1x fuse each 10, 15, 30 Amp

Galvanized, 273x131x67mm, for Multipoint I, II, IV, V and various lights

with 7-pin plug and 5-pin bayonet

with 13-pin plug and 5-pin bayonet

with 7-pin plug, 2x 3.0 m DC outlet, 5-pin. bayonet

with 13-pin plug, 2x 3.0 m DC outlet, 5-pin. bayonet

Expand your Connix set with two new front lights!  ~Perfect for use with front weights or other front mounted equipment. Simply connect the front lights to the radio transmitter of your existing Connix set can be carried out."PAIRING" code/alignment: 7-pin. Plug in the transmitter, turn on the ignition, press the pairing buttons on the lights at the same time for 5 seconds. press. ~  ~  ~  ~  ~ ~

Brake light, tail light, indicator, license plate light, with magnet (no StVZO approval)Simply connect the tail lights to the radio transmitter of your existing Connix set.TIP: In order to connect the tail light to the existing light set, a code comparison must be carried out "PAIRING" must be carried out in advance."PAIRING" code/alignment: 7-pin. Plug in the transmitter, turn on the ignition, press the pairing buttons on the lights at the same time for 5 seconds. press. ~  ~  ~  ~  ~  ~  ~  ~  ~  ~  ~  ~ ~

With 4 functions: brake light, tail light, indicator, license plate lightwireless, magnetic, rechargeableChange between machines and vehicles in seconds without toolsdurable, developed for agricultureConsisting of: right tail light, tail light left, 7-pin Plug, transmitter/transmitterCAN bus compatible, battery, charging cable, EMC, ECE10, RoHS, IP65, -20C/+50C, 12V(no StVZO approval)

magnetic, wireless, rechargeable, with monitoring display/sensorIndicator with neon light effect, modern design with clear and bright lightWith 6 lighting functions: tail light, indicator, brake light, license plate light, rear fog light and triangle reflectorThe display sensor for 12V socket is wirelessly connected to the radio light and provides information about the function and battery charge level of the lights while driving.Simply plug the display sensor into the vehicle's 12 V socket. An additional comfort that also provides additional security.The ConniX Plus is bright, simple, unique and equipped with intelligent technology. It is the first choice for wireless lighting solutionsSwitch between different vehicles and machines in seconds. Consisting of: rear light right, rear light left, 7-pin. Plug, transmitter/transmitter, display sensor, battery charging cable, 12V, up to 10 hours battery life, ECE R10, RoHS, IP65, -20C/+50C, transmission max. 20m, (not StVZO approved )

For connecting two ribbon cables?

70x70 mm, 2 holes for fastening, hole spacing 45 mm, suitable for e.g. Deutz, ...

For mounting at the front, base plate made of plastic, snap fastening, 2 holes M5, 45 mm hole spacing.LxWxH: 95x90x54 mm

82 mm, 2 screws M5, screw spacing 45 mm, base plate metal.

12V, DC connection with 0.5 m cable, WxHxD: 44x66x28mm, incl. DC connector

12V, connection: grommet, WxHxD: 44x66x28mm

LxWxH: 120x80x56 mm, hole spacing 58 mm, suitable for e.g. Case IH, Deutz, Fiat, Ford, John Deere, MF, ...right/left

LxWxH: 120x80x135 mm, 22 slanted mounting plate, suitable for e.g. Case IH, Deutz, Fiat, Ford, John Deere, MF, ... right/left

LxWxH: 85x85x50 mm, M4 screws, hole spacing 45 mm, suitable for e.g. Case IH, John Deere, Fendt, MF, New Holland, ...right/left

suitable for MF, LxWxH: 128x68x48mm, ~Fastening: 2 screws M6, hole spacing: 45mm ?Design: left/right

Completely wired, connection cable with 7-pin plug and socket, with taillight, brake light, indicator light, license plate light, 2 triangular reflectors, sheet metal thickness 2mm, carrier height: 210mm

12V 1.2W, socket W2x4.6d