Check valves & lowering brake valves
All Products
Serves to hold large loads and to bridge load peaks.Single-acting check valve. Particularly suitable for single-acting hydraulic cylinders on reversible plows. Max. pressure 350 bar, control ratio 4:1
Serves to protect a hydraulic component against pressure peaks caused by external loads. Opening pressure 0.5bar
Particularly suitable for hydraulic cylinders that need to hold large loads in position. Max. pressure 350 bar, control ratio 4:1.
To keep the load in one position without leaking oil! The following functions are achieved:Limitation of the oil flow (even in the event of a line break)Prevents a pulling or pushing load from rushing awayPressure limiting functionUse only possible with control valves that have a consumer tank in the zero position -Connection (floating position) havePressure range 60 to 350 bar., max. load pressure 270 bar, control ratio 4.25:1.
These valves allow an adjustable flow from the consumer to the return. If the flow rate determined by the setting is exceeded, for example in the event of a pipe burst, the valve closes immediately. The movable baffle plate is pressed onto the valve body against the built-in spring due to the increased flow forces. The valves should be installed on the consumer as soon as possible to ensure maximum safety.
To keep the load in one position without leaking oil! The following functions are achieved:Limitation of the oil flow (even in the event of a line break)Prevents a pulling or pushing load from rushing awayPressure limiting functionUse only possible with control valves that have a consumer tank in the zero position -Connection (floating position) havePressure range 60 to 350 bar., max. load pressure 270 bar, control ratio 4.25:1.
Complete with banjo bolts, tube 12 mm, length eg 0-169mm refers to the installation length including locking block.
Unser Produktleiter
Werner Meixner
€10 voucher.
If you sign up for our newsletter.
You will receive €10 for free with your next purchase.