Hydraulic pumps and accessories

Our offer

Multigreifschaufel kompakt mit EURO-Aufnahme

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

€2,249.00*

-24 %

Kurbellagergehäuse hinten komplett, 281.0090

#FA117928

Complete rear crank bearing housing, 281.0090 Complete rear crank bearing housing, 281.0090

Rear crank bearing housing for driving the bedknife on Busatis and ESM double knife mowers.

€179.00* €235.00* (23.83% saved)

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

Injektor-Doppelflachstrahldüse AI3070 TeeJet

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-31 %

#47888

Interchangeable tip S1W Interchangeable tip S1W

€15.90* €23.00* (30.87% saved)

-38 %

#FA58056

Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)

All Products

#FA104703

VIVOIL Hydraulic pump XV-2P BG2 Hydraulic pump XV-2P BG2

€199.00*

#102514

VIVOIL Hydraulic pump XV-3P BG3 Hydraulic pump XV-3P BG3

A (mm): 147,0 B (mm): 72,5 Delivery volume (cm³/rev): 43,44 Direction of rotation: rechts Pression max (bar): 270 Pressure line n (mm): 51 Pressure line o (mm): M10 Suction line N: 51 mm Suction line O mm: M10 mm Working pressure (bar): 250

Over the last 3 decades, VIVOIL has earned an excellent reputation among European suppliers of hydraulic pumps. The result of research, ingenuity and a high level of manual skills is demonstrated by the new product lines of pumps, gear motors and gear flow dividers.Vivoil has always identified itself with great attention to detail and believes that this is the other side of the coin for is a company that is committed to offering its customers quality and value.Reliability, flexibility and quality have been lived every day in the company for years!

€439.00*

Variants from €259.00*

#FA104737

VIVOIL Hydraulic pump XV-3P BG3 Hydraulic pump XV-3P BG3

€425.00*

Hydraulikpumpe 19cm³/Umdr., linksdrehend, Einpass-ø 52mm, mit Flachzapfen

#FA16331

VIVOIL Hydraulikpumpe passend zu Steyr Hydraulikpumpe passend zu Steyr

€205.00*

#FA38793

Profile sleeve 1 3/8' x 6 Profile sleeve 1 3/8' x 6

Bore 22 mm.

€79.90*

Zapfwellenstummel für Vorsatzlager, 1 3/8 Zoll x 6

#FA38792

PTO shaft stub for outer bearing, 1 3/8 x 6" PTO shaft stub for outer bearing, 1 3/8 x 6"

Bore 22 mm. Total length 100mm.

€39.90*

#379

OMT Pump carrier Pump carrier

E-motor power (kW): 5,5-9 Length (mm): 143 Pump Group: 3 Ø bolt circle (mm): 265 Ø flange (mm): 300

Used to attach the hydraulic pumps to the electric motor. Material: aluminum

€52.90*

Variants from €21.90*

#26862

Pump driver Pump driver

BG: 2 Groove width (mm): 4 mm Interlocking: A 25x22 Length (mm): 23 Number of teeth: 14

Connecting hub between hydraulic pump and gearbox or hydraulic pump and outer bearing.

€9.00*

Variants from €7.99*

#74851

OMT Rubber cross for flexible couplings Rubber cross for flexible couplings

Model: R-62 Width (mm): 15,7 Ø inside (mm): 28,5 Ø outside (mm): 58,5

Rubber cross for the flexible claw couplings from OMT

€3.39*

Variants from €2.99*

Page 4 of 4

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Hydraulic pumps and accessories

Cylinder attachments, spare parts

Elektromotore mit Flansch

Gear pumps type-assigned

Hydraulic pump set

Pump bracket, elastic coupling

Hydraulic pump accessories

Gear pumps for wheel loaders

Standard gear pumps

Standard vivoil gear pumps

Hand pumps

Gear pumps for combine harvesters

Hydraulic power units

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.