Browse through our special offers and discover lots of great items at attractive prices!
Go to homepage

einfach besser Landwirtschaften
€0.00Test

Hydraulic hoses

Hydraulic hose, 2-ply

Pvc abrasion protection

Abrasion protection hdpe

Hy hoses dn10 ready for installation

Hy hoses dn16 straight/90°ebf

Hy hoses dn12 ger./rn

Hy hoses dn20 ready for installation

4-ply hydraulic hose

Hy hoses dn12 straight/90°ebf

Hy hoses dn10 ger./rn

Hy hoses dn08 straight/90°ebf

Hy hoses dn06 straight/90°ebf

Hy hoses dn12 ready for installation

Hy hoses dn10 straight/90°ebf

Hy hoses dn08 ready for installation

Hy hoses dn06 ready for installation

Skip product gallery

Our offer

#21294
Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*
€2,249.00*
#2549
Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*
-25 %
#FA54554
Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.00* €3.99* (24.81% saved)
-40 %
#FA63556
Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)
-10 %
#FA2531
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)
-5 %
#FA2521
Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)
#72983
Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*
-38 %
#FA58056
Knife for WELGER RP200 Knife for WELGER RP200

long cutting edge

€29.00* €47.00* (38.3% saved)
-21 %
#FA7700
Knife holder F22S, FN22S, N22R, N22RS Knife holder F22S, FN22S, N22R, N22RS

€59.00* €75.00* (21.33% saved)
-33 %
#FA49567
Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€21.90* €32.90* (33.43% saved)

All Products

#43377
HDPE abrasion protection for hydraulic hoses HDPE abrasion protection for hydraulic hoses
Suitable for hose bundles: 27-36 mm Thickness (mm): 2,5 Ø inside (mm): 27,0 Ø outside (mm): 32,0

Cost-effective abrasion protection spiral made from 100% recycled HDPE. Price per meter.

Variants from €4.29*
€6.00*
#101688
Ready-to-install hydraulic hose nominal width DN06, connection 8L, M14x1.5 mm Ready-to-install hydraulic hose nominal width DN06, connection 8L, M14x1.5 mm
Length (mm): 2750

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 400 bar, minimum bending radius 45 mm, weight 275 g/m, outer diameter 13.1 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Variants from €7.49*
€25.00*
#14820
Ready-to-install hydraulic hose nominal width DN08, connection 10L, M16x1.5 mm Ready-to-install hydraulic hose nominal width DN08, connection 10L, M16x1.5 mm
Length (mm): 2500

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 350 bar, minimum bending radius 55 mm, weight 330 g/m, outer diameter 14.7 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 2.5 m (€9.80 / 1 m)

Variants from €7.79*
€24.50*
#14851
Ready-to-install hydraulic hose nominal width DN08, connection 1x straight, 1x 90� bent, 10L, M16x1.5 Ready-to-install hydraulic hose nominal width DN08, connection 1x straight, 1x 90� bent, 10L, M16x1.5
Length (mm): 1500

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 350 bar, minimum bending radius 55 mm, weight 330 g/m, outer diameter 14.7 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 1.5 m (€12.20 / 1 m)

Variants from €8.79*
€18.30*
#3567
Ready-to-install hydraulic hose nominal width DN10, 1 straight connection, 1 connection 90� bent Ready-to-install hydraulic hose nominal width DN10, 1 straight connection, 1 connection 90� bent
Length (mm): 1900

Tractor 2K with union nut M18x1.5 on both sides, tube 12L, 1 straight connection, 1 connection 90 bent, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 330 bar, minimum bending radius 65 mm, weight 395 g/m, connection 12L, M18x1.5 mmApplied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 1.9 m (€12.58 / 1 m)

Variants from €10.00*
€23.90*
#2106
Ready-to-install hydraulic hose nominal width DN10, connection 12L, M18x1.5 mm Ready-to-install hydraulic hose nominal width DN10, connection 12L, M18x1.5 mm
Length (mm): 1100

Tractor 2K with union nut M18x1.5 on both sides, tube 12L, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 330 bar, minimum bending radius 65 mm, weight 395 g/m, outer diameter 16.8 mm Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 1.1 m (€14.55 / 1 m)

Variants from €8.50*
€16.00*
#15031
Ready-to-install hydraulic hose nominal width DN12, connection 15L, M22x1.5 mm Ready-to-install hydraulic hose nominal width DN12, connection 15L, M22x1.5 mm
Length (mm): 1300

Tractor 2K with union nut M22x1.5 on both sides, tube 15L, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 275 bar, minimum bending radius 80 mm, weight 510 g/m, outer diameter 20.3 mmApplied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 1.3 m (€16.88 / 1 m)

Variants from €13.50*
€21.95*
#15337
Ready-to-install hydraulic hose nominal width DN12, connection 1x straight/1x90� curved, 15L, M22x1.5 mm Ready-to-install hydraulic hose nominal width DN12, connection 1x straight/1x90� curved, 15L, M22x1.5 mm
Length (mm): 1300

Tractor 2K with union nut M22x1.5 on both sides, tube 15L, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight.max. Operating pressure 275 bar, minimum bending radius 80 mm, weight 510 g/m, outer diameter 20.3 mmApplied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Variants from €15.90*
€24.00*
#101694
Ready-to-install hydraulic hose, nominal width DN06, connection 8L, M14x1.5, 1x straight, 1x 90� bent Ready-to-install hydraulic hose, nominal width DN06, connection 8L, M14x1.5, 1x straight, 1x 90� bent
Length (mm): 450

Tractor 2K with union nut on both sides, 2 high-tensile steel wire meshes, thin synthetic top rubber, high flexibility, extremely small bending radius, low weight. max. operating pressure 400 bar, minimum bending radius 45 mm, weight 275 g/m, outer diameter 13.1 mm< br>Applied standards: EN 857 2SC, ISO 11237 2SC, SAE 100 R16S

Content: 0.45 m (€21.31 / 1 m)

Variants from €8.29*
€9.59*

Unser Produktleiter

Werner Meixner 

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.