Screw couplings

Our offer

#21294

Compact multi-grab shovel with EURO holder Compact multi-grab shovel with EURO holder

The compact multi-grab shovel for universal use is suitable for loading loose or bulky goods such as manure or shrub cuttings. The screwed side panels prevent load losses. The compact multi-grab bucket is available for tractors, farm loaders and wheel loaders with a Euro mount. Thanks to the high opening width, the edge of the bucket can be moved towards a wall when the gripper is open. Total height 645 mm, blade plate 6 mm thick, including side plates, plug BG3, double scraper edge 500HB

Variants from €2,249.00*

€2,249.00*

#2549

Cooking tines without a share Cooking tines without a share

Tine material 25x8.

€8.79*

-13 %

#FA54554

Crowd loose Crowd loose

Working width 105 mm, suitable for Regent chipper.

€3.49* €3.99* (12.53% saved)

-40 %

#FA63556

Double beam blade 2-hole Double beam blade 2-hole

98x74x3 mm, hole spacing 51 mm

€2.39* €4.00* (40.25% saved)

-5 %

#FA2521

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Agritec, Berti, Breviglieri, MEAAT, Mthing, Oehler, Vigolo, Vogel and Noot, AP-00891

€19.90* €20.90* (4.78% saved)

-10 %

#FA2531

Hammer mallet suitable for Hammer mallet suitable for

Agricom, Becchio &~ Mandrile, Desvoys, Kuhn, Kverneland, Maletti, MEAAT, Nobili, Omarv, Perugini, Rinieri, Vogel and Noot, Zappator

€17.90* €19.90* (10.05% saved)

-22 %

#FA34389

Holder for heavy cultivator tines Holder for heavy cultivator tines

Delivered per pair.

€64.90* €82.90* (21.71% saved)

#72983

Injector double flat jet nozzle AI3070 TeeJet Injector double flat jet nozzle AI3070 TeeJet

AI3070 with two wide-angle flat jets, therefore very suitable for lower spray heights for better use of the droplet energy during deposition.30 jet forward in the direction of travel optimizes penetration in the upper leaf and ear area on the front sides, 70 jet towards the rear covers rear target areas.Drop sizes like short AIXR TeeJet and therefore the perfect compromise between loss reduction and degree of coverage. Large, round, free cross-sections for liquid and air increase operational safety and wear.Plastic designInjector can be removed if necessary.Automatic alignment with Quick TeeJet cap and seal Order No. 72989 Pressure range 1.5 - 6 bar, optimal 2 - 5 bar.Typical applications: Ear treatmentsother fungicides and insecticides in grain, leafy crops and special crops, potato cultivationHerbicides, especially for grasses and rough fields .

€13.90*

-27 %

#FA49567

Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional Loading wagon knife for P�TTINGER Siloprofi, Loading Professional, Harvesting Professional

Thickness 5mm

€23.90* €32.90* (27.36% saved)

-34 %

#FA25672

M-back Austro-Rap.1400 DIN80 M-back Austro-Rap.1400 DIN80

€25.00* €37.90* (34.04% saved)

All Products

#98824

DNP Screw coupling connector according to ISO 14541 with internal thread, PVV3 series Screw coupling connector according to ISO 14541 with internal thread, PVV3 series

BG/DN: 3/DN13 Flow rate (l/min): 45-90 L2 (mm): 72,5 L3 (mm): 70 Operating pressure (bar): 400 Thread: R 3/4 Zoll Version: Stecker

The PVV3 screw coupling series from dnp complies with ISO standard 14541 in sizes DN06 to DN20. In the standard version, the couplings are equipped with NBR seals. A version with EPDM or Viton seals is available on request. The operating pressure of the couplings has a range of 300 (DN30) to 450 bar (DN06).Coupling under residual pressure is possible on both the plug side and the socket side !

Variants from €10.90*

€17.90*

#98821

DNP Screw coupling sleeve according to ISO 14541 with internal thread, PVV3 series Screw coupling sleeve according to ISO 14541 with internal thread, PVV3 series

BG/DN: 3/DN13 Flow rate (l/min): 45-90 L2 (mm): 67 L3 (mm): 64,5 Operating pressure (bar): 400 Thread: R 1/2 Zoll Version: Muffe

Variants from €10.90*

€10.90*

#36915

Screw couplings according to DIN 2353 with bulkhead thread series PVV3 Screw couplings according to DIN 2353 with bulkhead thread series PVV3

Thread: M 18 x 1,5

Bulkhead fitting

Variants from €12.00*

€12.00*

#24296

Screw couplings according to DIN 2353 with bulkhead thread series PVV3 Screw couplings according to DIN 2353 with bulkhead thread series PVV3

Series / pipe Ø: 15L Thread: M 22 x 1,5

Bulkhead fitting

Variants from €12.00*

€12.00*

#31702

Screw couplings with AG - heavy series series PVV3 Screw couplings with AG - heavy series series PVV3

Thread: M 20 x 1,5

According to DIN 2353.

Variants from €10.70*

€10.70*

#31701

Screw couplings with male thread - heavy series PVV3 series Screw couplings with male thread - heavy series PVV3 series

BG: 3 BG/DN: 3/DN13 Flow rate (l/min): 45-90 Nominal size: DN13 Operating pressure (bar): 300 SW (mm): 30 Series / pipe Ø: 12S Thread: M 20 x 1,5 Ø E (mm): 42

According to DIN 2353.

Variants from €10.70*

€10.70*

#19195

Screw couplings with male thread - light series PVV3 series Screw couplings with male thread - light series PVV3 series

Series / pipe Ø: 18L Thread: M 26 x 1,5

According to DIN 2353

Variants from €10.70*

€35.00*

#19230

Screw couplings with male thread - light series PVV3 series Screw couplings with male thread - light series PVV3 series

BG: 5 BG/DN: 5/DN25 Flow rate (l/min): 189-280 Nominal size: DN25 Operating pressure (bar): 250 SW (mm): 41 Series / pipe Ø: 28L Thread: M 36 x 2,0 Ø E (mm): 55

According to DIN 2353

Variants from €10.70*

€35.00*

Unser Produktleiter

Werner Meixner

Werner has been with FAIE since 1994. He is our expert for agricultural machinery. If you are ever looking for advice in these areas, you are always in good hands with him.

€10 voucher.

If you sign up for our newsletter.
You will receive €10 for free with your next purchase.

Email address

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Screw couplings

External thread bulkhead

External thread

Internal thread

All Products

Unser Produktleiter

Werner Meixner

€10 voucher.